Auriol Z29962A User manual

Z29962A/
Z29962B/
Z29962C/
Z29962D 3
Funk-wetterstation
Bedienungs- und Sicherheitshinweise
radio-Controlled
weather station
Operation and Safety Notes
radiostyrd väderstation
Bruksanvisning och säkerhetsanvisningar
ΑΣΥΡΜΑΤΟΣ
ΜΕΤΕΩΡΟΛΟΓΙΚΟΣ ΣΤΑΘΜΟΣ
Υποδείξεις χειρισμού και ασφαλείας
radio-ohjattu sääasema
Käyttö- ja turvallisuusohjeet
radiostyret vejrstation
Betjenings- og sikkerhetshenvisninger

GB/IE/CY Operation and Safety Notes Page 7
FI Käyttö- ja turvaohjeet Sivu 26
SE Bruksanvisning och
säkerhetsanvisningar Sidan 44
DK Brugs- og sikkerhedsanvisninger Side 62
GR/CY Υποδείξεις χειρισμού
και ασφαλείας Σελίδα 81
DE/AT/CH Bedienungs- und
Sicherheitshinweise Seite 102

3
TENDENCY
%
COMFORT
IN OUT
OUT
O
C
O
C
DAY D M
s
MAX
MIN
MAX
MIN
YEAR
PM
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

4
TENDENCY
%
COMFORT
IN OUT
OUT
O
C
O
C
DAY D M
s
MAX
MIN
MAX
MIN
YEAR
PM
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

5
C
20
21
22

6
D
23
24
25

7GB/IE/CY
Introduction
Proper Use..............................................Page 8
Description of parts................................Page 8
Technical Data .......................................Page 9
Scope of Supply.....................................Page 10
Safety.......................................................Page 10
General Safety Information...................Page 11
Safety Instructions for Batteries .............Page 12
Before Initial Use
General information...............................Page 13
Setting up the external sensor...............Page 14
Setting up the weather station...............Page 14
Operation
Setting the time/date manually.............. Page 16
Displaying DST summertime..................Page 17
Setting the alarm....................................Page 17
Switching the alarm on/off ..................Page 17
Using the snooze function .....................Page 18
Temperature display ..............................Page 18
Humidity display ....................................Page 18
Setting up the weather forecast function..Page 19
Weather trend........................................Page 20
Setting the memory function for
minimum/maximum levels....................Page 20
Displaying the maximum/
minimum levels .......................................Page 20
Using 12/24-hour format.....................Page 21
Selecting the language..........................Page 21
Setting the time zone .............................Page 22
Changing the batteries ..........................Page 23
Troubleshooting...................................Page 23
Cleaning and Maintenance .............Page 24
Disposal...................................................Page 24
Declaration of Conformity...............Page 25

8 GB/IE/CY
Radio-controlled weather station
Q
Introduction
Familiarise yourself with the product be-
fore using it for the first time. In addition
please refer carefully to the operating
instructions below and the safety advice. Use the
product only as described and for the indicated
purpose. Keep these instructions in a safe place. If
you pass the product on to anyone else, please
ensure that you also pass on all the documentation.
Q Proper Use
The weather station displays the indoor and outdoor
temperature in Celsius (°C) or Fahrenheit (°F), the
indoor relative humidity in % RH and their maximum
and minimum levels. The weather station also displays
a weather forecast, the time in 12/24-hour format
and the date. It is also equipped with an alarm and
calendar function. Any other use or modification of
the instrument constitutes improper use and may
result in injury and/or damage to the instrument.
The manufacturer is not liable for damage caused
by improper use. The device is not intended for
commercial use.
Q Description of parts
Weather station
1Weather icon
2Comfort indicator
3Humidity (%RH) (indoor)
4MAX display for indoor/outdoor temperature
5Indoor temperature
6MIN display for indoor/outdoor temperature

9GB/IE/CY
7Outdoor temperature
8Date (Day/Month)
9Time
10 ZZ/REGISTER button
11 MEMORY button
12 ADJUST button (for settings)
13 ALARM button
14 CLOCK button
15 -Icon
16
s
-Icon (DST/summertime)
17 YEAR/DAY display
18 MAX/MIN display for humidity
19 Weather trend
20 Hanger
21 Battery compartment
22 Stand
External sensor
23 Indicator LED
24 Hanger
25 Battery compartment
Q Technical Data
Weather station:
Indoor temperature
measuring range: 0 - + 50 °C
+ 32 - + 122 °F
Temperature
resolution: 0.1 °C
Measuring range
humidity: 20 - 95 %
Resolution
humidity: 1 %
Radio signal: DCF

10 GB/IE/CY
Battery: 2 x AA 1.5 V (included in
delivery scope)
External sensor:
Temperature
measuring range: – 20 - + 60 °C
– 4 - + 140 °F
HF transmission
signal: 433 MHz
HF transmission
range: max. 30 metres in open space
Battery: 2 x AA 1.5 V (included in
delivery scope)
Q
Scope of Supply
Please check the supplied items immediately after
unpacking the device to ensure that there is nothing
missing and that the product and all of its parts are
in perfect condition.
1x radio-controlled weather station
1x external sensor
1x stand (weather station)
4x battery AA 1.5 V
1x operating manual
Safety
YOU SHOULD STORE ALL SAFETY INFORMATION
AND INSTRUCTIONS IN A SAFE PLACE IN CASE
YOU NEED TO REFER TO THEM AGAIN IN THE
FUTURE!

11GB/IE/CY
General Safety
Information
J WARNING!DANGER TO
LIFE AND ACCIDENT HAZARD
FOR TODDLERS AND SMALL
CHILDREN! Never allow children to play un-
supervised with the packaging material. There
is a danger of suffocation from the packaging
material. Children frequently underestimate the
dangers. Children should be kept away from the
product at all times. This is not a toy.
m DANGER TO LIFE! Batteries can be swallowed,
which may represent a danger to life. If a battery
has been swallowed, medical help is required
immediately.
J Children or persons who lack the knowledge or
experience to use the device or whose physical,
sensory or intellectual capacities are limited must
never be allowed to use the device without su-
pervision or instruction by a person responsible
for their safety. Children must never be allowed
to play with the device.
J Do not use the device in hospitals or medical
facilities, as otherwise this may result in malfunc-
tions of life-support systems.
J Do not expose the device to an extremely high
electromagnetic field. This may impair the cor-
rect functioning of the device.
J Please note that the guarantee does not cover
damage caused by incorrect handling, non-
compliance with the operating instructions or
interference with the device by unauthorised
individuals.

12 GB/IE/CY
Safety Instructions
for Batteries
JRemove the batteries from the device if they are
not going to be used for a prolonged period.
JCAUTION! DANGER OF EX-
PLOSION! The batteries must
never be recharged!
JWhen inserting the batteries, ensure the correct
polarity! This is shown in the battery compart-
ments.
JIf necessary, clean the batteries and device
contacts before inserting the batteries.
JRemove spent batteries immediately from the
device. There is an increased danger of leaks!
JBatteries must not be disposed of in the normal
domestic waste!
JEvery consumer is legally obliged to dispose of
batteries in the proper manner!
JKeep batteries away from children; do not
throw them in the fire, short-circuit them or take
them apart.
JAlways replace all the batteries at once.
JUse batteries of the same type only.
JIf the above instructions are not complied with,
the batteries may discharge themselves beyond
their end voltage. There is a danger of leaking.
If the batteries have leaked inside your device,
you should remove them immediately in order
to prevent damage to the device!
JAvoid contact with the skin, eyes and mucous
membranes. Any parts of the body coming into
contact with battery acid should be rinsed off
with copious amounts of water and/or a doctor
contacted if necessary!

13GB/IE/CY
Q
Before Initial Use
Q
General information
m CAUTION! When choosing where to position
the weather station, make sure that it is not
exposed to direct sunlight, vibrations, dust, heat,
cold or moisture. Do not place the weather
station or external sensor near to heat sources,
e.g. radiators, as this may result in damage to
the instruments.
jDo not place the devices near sources of inter-
ference such as television sets, computers, thick
walls, thermopane windows etc. Otherwise the
transmission of radio waves between the devices
may be impaired.
jPlease ensure that neighbouring devices are not
operated at the same frequency of 433MHz.
Such devices may cause interference to the
radio connection.
jDo not place the devices next to or on metal
plates. Otherwise the quality of radio wave
transmission may be reduced.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made up
of time pulses transmitted from one of the highest
precision clocks in the world close to Frankfurt/Main
in Germany - it varies by 1 second in 1 million years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500 km around Frankfurt/Main.

14 GB/IE/CY
Q
Setting up the external sensor
Inserting the batteries:
jRemove the battery compartment cover from
the back of the external sensor.
jInsert two 1.5 V batteries (AA) (included) in
the battery compartment 25.
Note: make sure that the polarity is correct.
This is indicated inside the battery compartment
25 (see Fig. D).
- The external sensor is now ready for operation
and the indicator LED 23 lights up briefly.
jClose the battery compartment cover.
Installing the weather station and/or
external sensor on the wall:
Note: you will need an electric drill for this step of
the installation.
m CAUTION! DANGER TO LIFE, RISK OF
INJURY AND MATERIAL DAMAGE! Read the
operating and safety instructions for your drill care-
fully.
WARNING!DANGER TO LIFE! Take care
that you do not hit electricity, gas or water lines when
you drill into the wall. If necessary, check with a pipe
and cable detector before drilling.
Q
Setting up the weather station
Inserting the batteries:
jOpen the battery compartment 21 on the back
of the weather station.
jPlace two 1.5 V batteries (AA) (included) in
the battery compartment 21.
Note: take care that the polarity is correct. This

15GB/IE/CY
is indicated inside the battery compartment 21
(see Fig. C).
jClose the battery compartment cover.
As soon as the batteries have been inserted, the LCD
indicates the indoor temperature 5and the humidity
3. The weather station starts to receive the signal
from the external sensor. When it has successfully
received the external sensor signal, the outdoor
temperature 7appears on the LCD after around
1 minute.
Note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.
The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing icon 15.
Once the DCF radio signal has been picked up
successfully, the icon 15 is displayed constantly
on the LCD.
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
jIf the weather station does not work properly, you
can restart it by pressing the ADJUST button 12.
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-

16 GB/IE/CY
tinues, you can also set the time and date manually
(see “Setting the time/date manually”).
Q
Operation
Reception of the DCF radio signal may be disrupted
or interrupted at the location of the weather station.
In this case you are able to set the instrument
manually.
Q
Setting the time/date manually
1. Press and hold the CLOCK button 14 for approx.
3 seconds. The hours on the time display 9
begin to flash.
2. Press the ADJUST button 12 to set the required
number.
Tip: keep the ADJUST button 12 pressed for
faster time setting. You can also use this option
for the subsequent settings.
If no button is pressed in the space of approx.
1 minute, the LCD automatically returns to the
standard display.
3. Press the CLOCK button 14 to confirm your
entry. The minutes on the time display 9start
to flash.
4. Repeat steps 2 and 3 to set the minutes, seconds,
year 17 and date 8(month and day).
Note: the seconds display can only be reset
to 00.
5. The LCD returns to the standard display after
you have made the settings.

17GB/IE/CY
Q
Displaying DST summertime
Summertime is automatically displayed on the LCD
by the
s
icon 16. The DCF radio signal indicates
to the clock whether or not it is summertime.
Q
Setting the alarm
jPress and hold the ALARM button 13 for approx.
3 seconds.
Note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with AL. Otherwise 0:00 and AL are displayed.
jPress the ALARM button 13 briefly. The hours
start to flash.
jPress the ADJUST button 12 to set the required
number.
jPress the ALARM button 13 to confirm your
entry. The minutes start to flash.
jPress the ADJUST button 12 to set the required
number.
jPress the ALARM button, 13 to confirm your
entry.
jThe LCD returns to the standard display (Time 9).
Q
Switching the alarm on/off
jPress and hold the ALARM button 13 for approx.
3 seconds. The set alarm time appears on the LCD.
jPress the ADJUST button 12 to switch the alarm
on or off.
Note: when the alarm is switched on, is
displayed above AL.
Note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
jThe alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal

18 GB/IE/CY
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY 11, ADJUST
12, ALARM 13 or CLOCK 14, to switch the
alarm signal off within this time.
Note: the alarm rings every day at the set time.
Q
Using the snooze function
jPress the ZZ/REGISTER button 10 when the
alarm is ringing to activate the snooze function.
jThe alarm stops ringing and ZZflashes. The
alarm rings again twice at 5 minute intervals.
Note: the alarm rings every day at the set time.
Q
Temperature display
The LCD indicates both the current indoor 5and
outdoor temperature 7.
jPress and hold the ADJUST button 12 for approx.
3 seconds. The °C display starts to flash.
jPress the ADJUST button 12 to switch between
the °C and °F temperature scales.
jPress the MEMORY button 11 to confirm your
entry.
Q
Humidity display
The current humidity 3is displayed on the LCD.
The comfort indicator 2divides the humidity into
three categories.
The displays have the following meaning:
WET = humidity 3> 75 %
COMFORT = humidity 345 - 75 %,
DRY = humidity 3< 45 %

19GB/IE/CY
Q
Setting up the weather
forecast function
Note: please also listen to the weather forecast from
your local weather service. If there are discrepancies
between the instrument and your local weather
service, please go by the local weather service
forecast.
jPress and hold the ADJUST button 12 for approx.
3 seconds. The °C or °F display starts to flash.
jPress the CLOCK button 14. The weather icon 1
starts to flash.
jPress the ADJUST button 12 to set the current
weather conditions.
The following weather icons are available:
cloudy
partly cloudy
sunny
rainy
Note: please ensure that you set the current
weather conditions correctly; otherwise the dis-
played weather forecast will not be accurate.
jPress the MEMORY button 11 to confirm your
entry.
Note: if no button is pressed in a space of
approx. 30 seconds, the LCD returns to the
standard display.

20 GB/IE/CY
Q
Weather trend
The weather station has a weather trend display 19.
The displays have the following meaning:
= the weather is deteriorating
= no change in the weather
= the weather is improving
Q
Setting the memory function
for minimum/maximum levels
jPress and hold the ADJUST button 12 for approx.
3 seconds. Either the °C or °F display starts to
flash.
jPress the CLOCK button 14 twice. - - starts to
flash.
jPress the ADJUST button 12 to set the required
memory interval.
The following intervals are available:
- - = general minimum/maximum levels
1d = daily minimum/maximum levels
7d = weekly minimum/maximum levels
jPress the MEMORY button 11 to confirm your
entry.
Note: if no button is pressed in a space of
approx. 30 seconds, the LCD returns to the
standard display.
Q
Displaying the maximum/
minimum levels
Note: depending on the memory interval setting,
the LCD displays either the general, daily or weekly
minimum/maximum levels.