Auto Vox T1000 User manual

OEM REPLACEMENT STYLE
BLUETOOTH FUNCTION
UNIVERSAL CLIP-ON STYLE
Please read this manual carefully before operation.
General Introduction
This rear view mirror monitor is designed for car rear view purpose. which
can work with a reversing camera (NTSC or PAL) to show the images behind
your car, with good compatibility with multimedia parking sensor system beside
the camera. With dual video input, it can be connected to a car DVD player, too.
When reversing gear is engaged the rear view system automatically starts to
work and when the monitor is powered off, the mirror functions just like a normal
rear view mirror with anti-glare function. Both OEM Replacement Style & Clip-on
Style are available for selection, with Bluetooth function optional,
Bluetooth Function
Connection:
Turn on the mirror monitor, activate the bluetooth function of your mobile phone,
then search the pairing device and find Car Kit. Select Car Kit, and enter pairing
code 1234 before pairing. After 2-3 seconds, pairing and connection is done, when
you can find CONNECTED in the center of the screen as well a bluetooth mark on
the left upper corner.
Caller ID Display, answering & ending:
After connection, when the connected mobile phone has an incoming call, the
signal goes automatically to the mirror monitor, and caller’s number is displayed
on the screen, with the mobile phone ring coming out from the speaker of mirror.
Press AV1/AV2 button once to answer the phone, and again to end the conversation.
Disconnection & Reconnection:
Both the mirror monitor and mobile phone must be ON and connected.
Turn the bluetooth of mobile phone off for disconnection, and to reconnect it, just
repeat the operations according to Connection instruction above.
When the mobile phone and mirror monitor are 10 meters far away from each other
(or less than 10m when there is an obstacle between them), the Bluetooth will be
automatically disconnected, and when you bring them nearer and restart the mirror
monitor, they can get reconnected.
Turn off the mirror monitor, the Bluetooth gets disconnected, and you can simply
turn on the mirror monitor to get reconnection.
Volume Adjustment:
The mirror monitor comes out of factory with a moderate volume, but users can still
adjust it by pressing button to add or to decrease the volume.
4.3" Car Rear View Mirror Monitor 4.3" Car Rear View Mirror Monitor

Hyundai Sonata, Elantra,
etc.
Remarks: The special brackets apply but not limited to the car models mentioned
above. Please contact us or consult with professional technicians on whether your
car model can be fitted.

FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.