TrailFX J044T User manual

www . T r a il F X . c om
Page 1of 3 Rev 051418
TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF
THE LED LIGHT BRACKET CAREFULLY.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE USE SAFETY GLASSES & ENSURE TO BLOCK VEHICLE
MOVEMENT DURING INSTALLATION PROCESS
60-180 min
[e-mail]
1 866 638 4870
POLISHED STAINLESS STEEL –LIMITED LIFETIME
POWDER COATED BLACK –3 YEARS
Cutting Not
Required
PARTS LIST
Qty
Part Description
Qty
Part Description
2
LED Light bracket Q235
NOTE: OEM Hardware to be used to install the Products!!!
INSTRUCTION PROCEDURE
1. Please inspect all the accessories between the LED light bracket and the vehicle body periodically to ensure the using safety.
Clean the LED light bracket periodically to make it bright new, but avoid using acid and alkaline liquid.
2. Functions and features.
3. With great appearance, sound construction, free assembling and dismounting rapidly.
4. Basic accessories.
LED Light Bracket
Part: J044T
Fit: 2007- Current Jeep Wrangler JK
Drilling Not
Required

www . T r a il F X . c om
Page 2of 3 Rev 051418
Finish mounting the LED light bracket.
Inspect whether all the bolts have been tightened up
Finish the installation easily.
Demount the original bolts.
Install one no.2 bolt, one no.5 spring washer, one no.4 flat gasket, one no.3 bolt sleeve with one no.1 bracket.
Installation Complete
Link the LED light bracket with the vehicle body then tight them up. The LED light bracket should be bilateral symmetry.

www . T r a il F X . c om
Page 3of 3 Rev 051418
PRODUCT CARE
1. Periodically check the productto ensure allfasteners aretightand componentsare intact.
2. Regular waxingis recommended to protect the finish of the product.
3. Use ONLY Non-Abrasive automotive wax. Use of any soap, polish or wax thatcontains an abrasive is detrimental and
Can scratchthe finishleading tocorrosion.
4. Aluminumpolishmaybeusedtopolish smallscratches andscuffs for Stainless Steelfinish.
5. Mild soap may be used to clean theproduct for both Stainless Steel and Black finish.
Check out these other TrailFx Products!! www.TrailFX.com
FAQ’s
1. Hardware’s are not of correct size.
In GMC / Chevrolet truck model 2006 & up, customer needs to reuse the factory body bolts to install the bracket. If your vehicle is not GMC
/ Chevrolet 2006 & up, please ensure that holes are not partially covered with any plastic grommet or rust? If it is, please remove the
plastic grommet & rust from the thread holes & re-try the installation.
2. Mounting Bracket are not getting Installed properly.
In some cases Illustration images shown in Installation manual may not be the exactly same as per actual vehicle images ,also if Driver /
Passenger side mounting brackets are very identical in the design, suggest referring Parts Identification guide to avoid fitment issue.
3. Products are thumping / rattling after installation.
Please ensure that all required mounting brackets / hardware’s are installed & tighten correctly. Suggest using white lithium / regular grease
between the metal to metal contact surfaces.
4. Side Bar is not aligning with vehicle / Step Pads are not aligning with vehicle doors.
Side bar may be interchanged or mounting brackets are not installed at the correct position in the vehicle. Please refer Parts identification
guide.
5. Missing / Excess Hardware.
Recheck hardware count as per the part list.
6. Product not installing properly.
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of
purchase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness
for a particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product at our
option, when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this product
voids the warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically excludes
liability for any incidental or consequential loss or damage.