Havis-Shields Van Slide Out Side Step KK-S-ST-SS Configuration guide

INSTALL INSTRUCTIONS KK-S-ST-SS
SLIDE OUT SIDE STEP
2004-2008 SPRINTER VAN
TOOLS REQUIRED:
Power Drill
Drill bit Set
Open-end wrench set
Standard socket set
Ratcheting wrench
HARDWARE:
QTY DESCRIPTION PART #
2 ½-13 x 4” ex head bolt GSM33056
2 ½-13 Nylock nut GSM30020
4 ½” Flat washer GSM31009
4 3/8-16 x 1” ex head bolt GSM33028
8 3/8” Flat washer GSM31007
4 3/8” Lock washer GSM31028
4 3/8-16 ex nut GSM30008
8 ¼”x ¾” ex head lag bolt GSM33060-1
1 Left side upper mounting bracket 110-000126
1 Right side upper mounting bracket 110-000148
2 Left/Right fender mounting brackets 110-000149
1 Step Assembly
Stainless Steel
Tubing
½” ardware
Right Fender
Mounting brackets
(8) ¼ x ¾”
ex head
lag bolts
Step Assembly
w/side slider
brackets
Left side upper
Mounting bracket
Tighten
outer bolts
last
Right side upper
Mounting Bracket
Left Fender
Mounting brackets

KK-S-ST-SS_INST_9-06
INSTALLATION:
1. MOUNT SIDE STEP:
• Locate (2) - ½” holes located on passenger side in the vehicle frame channel under
side door (Approx 30” apart).
• Mount the Left & Right upper mounting brackets using ½-13 x 4” bolts, washers, and
Nylock nuts through the located ½” holes in vehicle frame.
• Attach step assembly to the Left & Right upper mounting brackets using 3/8-16 x 1”
bolts, flat washers, lock washers and nuts. Be sure to attach Left/Right Fender
mounting brackets to the outer holes on the assembly.
• Tighten all hardware with the exception of hardware containing Left/Right mounting
brackets. See drawing
• With Left/Right outer mounting brackets positioned drill 5/32” holes where the
brackets meet the vehicles inner fender wall.
• Secure to vehicles inner fender using (8) ¼” x ¾” ex head lag bolts.
Note: Extra holes are provided for alternative applications. Only (8) bolts are necessary for standard
application.
• Tighten the remaining hardware and check that step functions properly.