AUTOCHAIR SmartLifter LP Series Guide

Smart Lifter
User & Installation Manual
LP Range

2
www.autochair.co.ukSmart Lifter – LP Range
Safety Guidelines
WARNING! - Authorised Autochair technicians & installers are to complete the
initial set up of this device. All Installation instructions must be followed.
WARNING! - These symbols denote a potentially dangerous situation. Failure to
carry out the specified procedures may result in injury or damage to the device.
MANDATORY! - The indicated actions must be carried out as specified. Failure
to perform the specified actions may result in injury or damage to the device.
PROHIBITED! - Do not carry out the indicated actions. They should not be
performed at any
time, under any circumstances. Carrying out a prohibited
action may result in injury or damage to the unit.
The following symbols are used to identify warnings and important details throughout
this manual. Please read them and ensure you are aware of their meaning.
Please fill out the following details for quick reference:
Autochair Dealer:
Address:
Phone Number: Purchase Date:
Serial Number:
NOTE: This owner’s manual is compiled from the latest specifications and product information available at the
time of publication. We reserve the right to make changes as they become necessary. Any changes to our
products may cause slight variations between the illustrations and explanations in this manual and the product
you have purchased. The latest/current version of this manual is available on our website.
NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.
Copyright © 2017
Autochair Ltd.
1225202 Rev. H
Manufactured By:
Autochair Ltd
Wood Street North
Meadow Lane Industrial Estate
Alfreton
Derbyshire
DE55 7JR

3Smart Lifter – LP Range www.autochair.co.uk
Contents
1. INTRODUCTION ........................................................................................................ 4
2. SAFETY ...................................................................................................................... 5
3. TECHNICAL ............................................................................................................... 8
4. OPERATION ............................................................................................................... 9
5. REMOVING & REPLACING ...................................................................................... 15
6. TROUBLESHOOTING ............................................................................................... 17
7. LIFTING ACCESSORIES .......................................................................................... 18
8. CARE AND MAINTENANCE ..................................................................................... 20
9. WARRANTY ............................................................................................................... 21
10. INSTALLATION INSTRUCTIONS ............................................................................ 22
11. WIRING .................................................................................................................... 26
SMART LIFTER USER’S MANUAL
SMART LIFTER INSTALLATION MANUAL

4
www.autochair.co.ukSmart Lifter – LP Range
1. Introduction
Congratulations on the purchase of your new Smart Lifter
manufactured by Autochair Ltd
All models of this product are very powerful in both the UP (lifting) and DOWN (lowering) as well as the
IN (into vehicle) and OUT (out of vehicle) operation. Care should be taken that the boom and the mobility
product that is being lifted is free to move. These devices have the power to break trim and cause harm
if not operated correctly.
This Smart Lifter is designed to lift wheelchairs, electric wheelchairs and scooters into vehicles. They
should be fitted into the vehicle by a competent fitter who will also ensure that the correct lifting bracket
is fitted to suit your mobility vehicle. The fitter will also demonstrate the operation of your Smart Lifter and
show you how the lifting brackets are connected.
Please note that your Smart Lifter comes complete with a 12 month warranty. This warranty covers the
replacement of any faulty parts and the labour for replacing those parts. The warranty does not cover
travel costs.
For further peace of mind, we also offer extended warranties up to a total of 4 years which include an
annual service, which can be done at your home. If you would like further information on a service and
warranty packages, please call.
ONLINE AND PRIVATE PURCHASES
If you purchased your product online or from a previous owner and require any information about the
safe use and maintenance of your Smart Lifter, please visit our website at www.autochair.co.uk or con-
tact your Accredited Autochair Dealer.
END-USER’S AGREEMENT
By accepting delivery of this product, you agree that you will not modify, change or alter this Smart Lifter
or remove or render inoperable or unsafe any guards, shields, or other safety features of this product;
fail, refuse, or neglect to install any retrofit kits from time to time provided by Autochair to enhance or
preserve the safe use of this product.
DELIVERY AND SHIPPING
Before using or operating your Smart Lifter, make sure your delivery is complete. Some components
may be individually packaged. If you do not receive a complete delivery or if any damage has occurred
to the Smart Lifter or packaging whilst in transit, please contact your Accredited Autochair Dealer. Upon
delivery of your new Smart Lifter your Accredited Autochair Dealer should provide a demonstration on
the correct use of the Smart Lifter.
FEEDBACK AND SUGGESTIONS
We want to hear your questions, comments, and suggestions about this manual. We would also like
to hear about the safety and reliability of your new Smart Lifter and about the service you received from
your Accredited Autochair Dealer.
Please notify us of any change of address, so we can keep you apprised of important information about
safety, new products, and new options that could improve your ability to use and enjoy your lift system.
Please feel free to contact us at the address below:
Please read through these instructions thoroughly before operating your Smart Lifter.
Autochair Ltd
Wood Street North
Meadow Lane Industrial Estate
Alfreton
Derbyshire
DE55 7JR
0800 009 2326
[e-mail]
www.autochair.co.uk

5Smart Lifter – LP Range www.autochair.co.uk
MAX
--- kgs
2. Safety
Product Safety Symbols
Please study the symbols below to ensure you understand them completely. They are used on the Smart Lifter and in
the manual to identify warnings and mandatory or prohibited actions .
Read and follow all directions in this manual.
Maximum lifting capacity.
Do not ride on the mobility product while operating the Smart Lifter or
when the vehicle is in motion.
Pinch/Crush points on the Smart Lifter. Keep hands and fingers away
from moving components and crush points when operating the Smart
Lifter.
Battery posts, terminals and related accessories
contain lead and lead compounds. Wear goggles
and gloves when handling batteries and wash
hands after handling.
Disposal and recycling. Contact your Accredited Autochair Dealer for
information on proper disposal of your Smart Lifter and its packaging.

6
www.autochair.co.ukSmart Lifter – LP Range
LIFTING CAPACITIES
The Smart Lifter is designed to lift a maximum weight of 100kg, 125kg, 150kg or 200kg depending
on the version you have installed in your vehicle. Check this by referring to labels on the lift arm.
Under no circumstances should the Smart Lifter exceed the stated lifting capacity. Subjecting the
Smart Lifter to the strain of lifting more than it is designed to may cause it to fail, resulting in damage
to the mobility product and/or injury to the operator. Refer to the mobility product specifications for
information on the overall weight of the mobility product before lifting with the Smart Lifter.
WARNING! Exceeding the maximum lifting capacity of your specific Smart Lifter may
cause the lift system to fail, resulting in injury to the operator and damage to the hoist.
MANDATORY! Adding accessories, oversized batteries, or a different seat will increase
the weight of your mobility device. Verify with your mobility device supplier to ensure
your mobility device does not exceed the maximum lift capacity of the Smart Lifter.
WARNING! The Fitting Kit and Accessories for your vehicle may be rated at a lower
capacity than your Smart Lifter. Please check with your Accredited Autochair Dealer
to ensure the correct Safe Working Load is maintained.
INSTALLATION
The Smart Lifter is intended for installation in the boot of a vehicle. Read and fully understand
the installation instructions with the Smart Lifter and the related fitting kit instructions before
installing the lift system.
WARNING! The Smart Lifter is only intended to be installed by an Accredited Autochair
Dealer or qualified technician. Separate installation instructions are provided with the
Smart Lifter and the installation kit. Read and fully understand the manual prior to
installation. Do not attempt to install the Smart Lifter yourself.
PRE-USE INSPECTION
There should be no sharp edges on the Smart Lifter, the A-Frame or the scooter brackets. If you
find any sharp edges, please contact your Accredited Autochair Dealer and notify them. Make
sure that you are completely happy with the operation of your Smart Lifter before lifting your mobility
device. Misuse or incorrect operation of the Smart Lifter could result in injury. Inspect the lifting
straps before every use for twisting, fraying or signs of wear. If signs of wear become evident, have
them replaced by your Accredited Autochair Dealer.
WARNING! A frayed or worn strap can snap, resulting in damage to the Smart
Lifter and mobility device and potentially injury to the operator.
MANDATORY! If your scooter or mobility device model changes, please contact your
Accredited Autochair Dealer to confirm suitability with your existing hoist before use.
OPERATOR POSITIONING
Keep hands and fingers clear of the lift arm while the lift system is lifting/lowering or loading in/out
a mobility product. The operator should stand a safe distance from the Smart Lifter when it is in
operation to ensure that their feet are never positioned under a raised mobility product.
2. Safety

7Smart Lifter – LP Range www.autochair.co.uk
2. Safety
VEHICLE POSITIONING
Be sure your vehicle is parked on flat, level ground and the handbrake is engaged before attempting
to lift a mobility product. Before lowering ensure that the Smart Lifter is fully out of the vehicle, other-
wise your mobility device may come into contact with your vehicles bumper.
Before lifting the mobility product for the first time, operate the Smart Lifter without a load until you
are familiar with the controls and how the Smart Lifter operates.
Any adjustment to the Smart Lifter settings must only be carried out by an Accredited Autochair Dealer.
Your Smart Lifter should be serviced every year to ensure it is in good working order.
If in doubt about any aspect of your Smart Lifter, contact your Accredited Autochair Dealer.
WARNING! The Smart Lifter must never be operated by a child or any person not
deemed appropriate by the technician who installed it.
WARNING! The safety R-clip must be fitted into the top pin in the A-Frame
before operating.
WARNING! Note the position of all pinch point warning labels stating “Keep Clear”.
Never place your hands in these locations when the Smart Lifter is in operation.
WARNING! The Smart Lifter must never be used to lift items other than the mobility
product it was originally installed and set-up to lift. If you wish to lift additional mobility
products, contact your Accredited Autochair Dealer.
WARNING! Never use an Smart Lifter that has signs of damage or excessive wear.
WARNING! Do not exceed the maximum stated lifting capacity.
WARNING! Misuse of the Smart Lifter may result in serious injury and damage to
the unit or vehicle.
WARNING!
Attempting to lift a mobility product when a vehicle is not on level
ground will cause the mobility product to swing toward or away from the vehicle,
making it difficult to get the mobility product into the vehicle.

8
www.autochair.co.ukSmart Lifter – LP Range
64
2
5
5
3
1
6
7
11
10
8
9
12
13
14
3. Technical
Smart Lifter Model L-P100 L-P125 L-P150 L-P200
Weight of the lifting arm: 11kg 11kg 11kg 14kg
Maximum lifting capacity: 100kg 125kg 150kg 200kg
Power supply: 12v DC
Maximum current draw: 22 Amps
Product materials: Aluminium & Mild/Stainless Steel
Material Finish: Powder coated - grey, red, blue or pink
PRODUCT SPECIFICATIONS
1. BOOM
2. A - FRAME
3. IN/OUT ACTUATOR
4. IN/OUT ACTUATOR FIXING PLATE
5. ACTUATOR PIN
6. RETAINING PIN
7. SPREADER BAR
8. CONTROL BOX
9. HANDSET
10. PIVOT POST
11. UP/DOWN ACTUATOR
12. HANDSET CABLE
13. SPREADER BAR STRAP
14. KEYHOLE PLATE

9Smart Lifter – LP Range www.autochair.co.uk
4. Operation - Loading
LOADING A SCOOTER/CHAIR
1. Locate the power control box. This will normally
be mounted to the A-Frame.
2. Press the power button to switch on the unit. This
will be indicated by a red light when switched on.
3. Locate and pick up the handset from its
stored position.
4. Keeping hold of the handset, move clear of
the Smart Lifter and it’s path of operation.
5. Press and hold the left or right button
(depending
on the side of installation) to swing
the Smart Lifter out wards.
6. Release the button when the boom is at its
outmost position.

10
www.autochair.co.ukSmart Lifter – LP Range
7. Position the scooter so that the lifting point
is directly beneath the spreader bar.
Ensure the
scooter is folded/seat off.
9. Engage the keyhole plates securely to the
lifting bracket. (The bracket will vary depending
on the scooter being lifted) DO NOT attempt to
lift without all lifting straps securely connected.
10. Press and hold the up button to raise the
scooter from the ground.
11. Release the up button once the scooter
has reached the upmost position.
WARNING! - When lifting/lowering do not hold
or steady the Smart Lifter by placing your hand
beneath the actuator. This is a pinch point and
may cause injury.
8. Press and hold the down button to lower
the boom.
4. Operation - Loading

11Smart Lifter – LP Range www.autochair.co.uk
12. Press and hold the left or right button (depending
on the side of installation) to move the scooter
inwards. Rotate the scooter as it moves inwards.
13. Guide the scooter into the boot, ensuring
there is adequate clearance for the boom and
scooter to swing into position.
14. Press and hold the down button until the
scooter is firmly placed onto the floor of the
vehicle and the straps become loose enough
to detach.*
15. If fitted, you should engage the restraint
system now.**
16. Return the handset to its stored position,
ensuring the cable is clear of trapping points.
Press the power button to switch the unit off.***
*Do not continue to hold the down button once
the scooter is grounded. Do not attempt to
maneuver the mobility device once it is grounded.
***Never leave the system switched on when
not in use.
4. Operation - Loading
WARNING!
** Autochair strongly recommend the mobility
equipment is restrained whilst traveling. Failure to
restrain your mobility equipment could result in
injury and damage to the vehicle or passengers.
Please read and understand
the following guidelines.

12
www.autochair.co.ukSmart Lifter – LP Range
UNLOADING A SCOOTER/CHAIR
1. If you have a restraint system fitted, this
should first be disengaged.
2. Locate the power control box. It is usually
mounted to the A-Frame.
3. Press the power button to switch on the
unit. This will be indicated by a red light when
switched on.
4. Locate and pick up the handset from its
stored position.
5. Keeping hold of the handset, move clear of
the Smart Lifter and it’s path of operation.
6. Press and hold the up button to raise the
scooter/chair from the vehicle floor.
4. Operation - Unloading
Stand
Here

13Smart Lifter – LP Range www.autochair.co.uk
7. Ensure there is clearance for the Smart
Lifter to swing fully outwards.
8. Press and hold the left or right button
(depending
on the side of installation) to swing
the Smart Lifter outwards.
9. Press and hold the down button until the
scooter/chair is grounded and there is some
slack in the lifting straps.*
10. Release the key hole plates.
11. Ensure the scooter/chair is free from the
Smart Lifter. Press the up button to raise the
boom fully upwards.
WARNING! - When lifting/lowering, do not hold
or steady the Smart Lifter by placing your hand
beneath the actuator. This is a pinch point and
may cause injury.
4. Operation - Unloading
*WARNING! Do not continue to
hold the down button once the
scooter is grounded.

14
www.autochair.co.ukSmart Lifter – LP Range
12. Press and hold the left or right button
(depending on side of installation) to move the
Smart Lifter inwards.*
13. Return the handset to its stored position,
ensuring the cable is clear of trapping points
or hazards.
14. Press the power button to switch off the
unit. The light should no longer be illuminated
indicating the unit is switched off.**
4. Operation - Unloading
**WARNING! Never leave the system switched on when not in use.
*WARNING! Ensure the boom is rotated sufficiently into the boot to avoid contact
with the boot lid when closed. Failure to ensure the boom is fully rotated
could result in damage to the vehicle.

15Smart Lifter – LP Range www.autochair.co.uk
REMOVING
1. Ensure the system power is OFF and unclip
the power connectors. DO NOT pull apart by
the wires. This will damage the connectors.
2. Remove the Retaining Clip from the top pin.
3. Partially remove the actuator pin. 4. Rotate the actuator away from the bottom
post and remove the actuator pin.
5. Slide the Smart Lifter upwards to remove it
from the mounting lugs. TAKE CARE when
lifting.
6. Store the Smart Lifter in a dry, safe place when
not in use.
5. Removing & Replacing

16
www.autochair.co.ukSmart Lifter – LP Range
5. Removing & Replacing
REPLACING
1. Rest the upper mounting lug onto the longer
upper pin before aligning the lower pin. The
Smart Lifter should slide smoothly down into
place.
1. Continued - Ensure both pins are located on
their respective lugs.
2. Half engage the actuator pin. Rotate the
Smart Lifter and align the bottom mount with
the actuator arm.
3. Fully engage the actuator pin by pushing it
all the way down. This will secure the in/out
actuator.
4. IMPORTANT - Fully insert the Retaining Clip
into the top pin.
5. Push the power connectors securely together.

17Smart Lifter – LP Range www.autochair.co.uk
6. Troubleshooting
Problem Solution
No power to the unit
• Make sure the Smart Lifter is switched on. Check the power light is on.
• Turn the Smart Lifter off and back on again and retry.
• Check the fuse. This is next to the car’s battery. A spare fuse is supplied.
• Is the car battery flat? Try to start the car.
The handset doesn’t work
• Make sure that the Smart Lifter is switched on.
• Turn the Smart Lifter off and on again and retry.
• Check the fuse. This is next to the car’s battery. A spare fuse is supplied.
• Is the car battery flat? Try to start the car.
• Inspect the handset for damage or loose connections.
• Inspect the cable for damage or wear.
Smart Lifter turns on but
won’t lift
• Inspect the actuator power supply. It may have become disconnected.
•
Inspect the electrical plugs between ‘UP/DOWN actuator and power supply,
reconnect if they have come apart.
Smart Lifter stops during
lifting
• Has the mobility device become caught on the vehicle?
• Smart Lifters are protected by a fuse located near the vehicle battery. If a
load greater than the Smart Lifter’s capacity is lifted, the fuse could blow.
The actuator is clicking
• The 200kg Smart Lifter actuator uses a clutch for overload protection. If
the noise only occurs at the top or bottom of the lift, this is perfectly normal.
If it occurs part way through the lift the unit is overloaded.
• Check the scooter/chair is not caught against anything.
The Smart Lifter lifts very
slowly
• The mobility device weight may be close to the Smart Lifter weight
capacity
• Is the vehicle’s battery charged? Low battery will cause slow operation.
What servicing is available?
• We offer yearly servicing to ensure your Smart Lifter is safe and reliable.
What if we have an
accident?
• If you think that your Smart Lifter has been damaged in any way please
call your Accredited Autochair Dealer to arrange an inspection and safety
test.
If you can’t find a solution to your problem, before operating the Smart Lifter please contact your
Accredited Autochair Dealer as soon as possible. Their details will be written on the inside cover and
the back page of this manual. If you do not have their contact details, get in touch with us and we’ll
let you know who your Accredited Dealer is and how to get in touch with them.

18
www.autochair.co.ukSmart Lifter – LP Range
7. Lifting Accessories
Spreader Bar with Keyhole Brackets
Spreader Bar with Karabiners
The lifting accessory for easier attachment
SMART LIFTER LIFTING ACCESSORIES
In order to ensure you get the best lift possible with your Smart Lifter, we offer a range of lifting accessories.
Your Smart Lifter can use a range of Spreader Bars, specific Scooter Brackets and mounting kits to
make stowing your mobility device as simple as possible.
Please identify your lifting accessory below and ensure it is correct for your individual needs. If your
scooter changes or you would like to see or discuss our entire range of lifting accessories, please
contact your Accredited Autochair Agent and discuss possible options with them.
The standard Smart Lifter lifting accessory
The general purpose spreader bar & attachment
set-up for lifting ordinary scooters and powerchairs.
The Keyhole Brackets allow for simple attachment
of a range of mobility devices.
The Spreader Bar with Keyhole Brackets can also
be used in conjunction with a number of specialist
lifting brackets.
This spreader bar makes use of spring-loaded
karabiners for even easier attachment and removal.
The karabiners snap over a pair of eye-hole
mounts on the scooter bracket, allowing
easier attachment.
This spreader bar arrangement is typically for use
by people with reduced hand co-ordination or with
difficulty when bending down.

19Smart Lifter – LP Range www.autochair.co.uk
7. Lifting Accessories
4 Point Spreader Bar with Keyhole Brackets
For lifting larger scooters & powerchairs
Easier lifting of larger scooters & powerchairs
4 Point Spreader Bar with Karabiners
MANDATORY! Smart Lifters are set up specific to your mobility device. If you
change your scooter or powerchair in any way, contact your Accredited Autochair
Dealer to have your Smart Lifter adjusted to suit your new mobility device.
WARNING! Never attempt to adjust or modify your Smart Lifter. Any
adjustments must be made by an Accredited Autochair Dealer.
The 4 Point Spreader Bar is ideal for lifting
longer, wider and heavier scooters & power
chairs. The 4 point mounting system allow for a
stable and level lift even when lifting large
or specialist mobility devices.
This version makes use of the standard
keyhole bracket attachments.
For use in the same application as the other 4 Point
Spreader Bar, the Karabiner version allows for lifting of
large or specialist scooters and powerchairs with
with the added simplicity of quick attach/detach karabiners.
Ideal for use by people with reduced dexterity or
with difficulty when bending.

20
www.autochair.co.ukSmart Lifter – LP Range
8. Care and Maintenance
The following routine maintenance should be performed at the indicated intervals. Failure to perform
the maintenance procedures at the required intervals may void your product warranty.
Perform prior to daily use:
• Inspect buckles, straps & fastenings and replace if necessary.
• Inspect lift for damage or excessive wear and replace if necessary.
• Check electrical wires and connections for signs of damage or wear.
Perform at least every 6 months:
• Inspect all mounting hardware and lift pivots for defects and a secure fit. Any parts found to be
loose should be tightened or replaced if necessary. If in doubt contact your Accredited Autochair
Dealer.
Perform every 12 months:
• It is recommended that the Smart Lifter is serviced every year by Autochair or your Accredited
Autochair Dealer.
Cleaning:
• If required the Smart Lifter can be cleaned with a damp cloth and detergent. Ensure the unit is
disconnected from the power before cleaning.
Do not immerse in water, do not allow water to run into the electrical connectors or control
box and allow to dry before use.
Smart Lifter Care and Maintenance