Atlas Equipment ATEXH-PV-12PX User manual

1
Model: ATEXH-
PV12PX
Revised: 09/29/23

2
CONTENTS
Product Features and Specifications ...................................................3
Installation Requirement ..................................................................5
Installation Steps ….........................................................................7
Exploded View ...............................................................................32
Test Run .......................................................................................36
Operation Instruction ......................................................................38
Maintenance ..................................................................................39
Trouble Shooting ............................................................................40
Warranty .......................................................................................41

3
I. PRODUCT FEATURES AND SPECIFICATIONS
CLEAR-FLOOR DIRECT-DRIVE MODEL FEATURES
Model PV12 (See Fig. 1)
· Direct-drive design minimizes the lift wear parts and breakdown ratio.
· Dual hydraulic cylinders, designed and made to high standards, utilizing imported oil
seal in cylinder.
· Self-lubricating UHMW Polyethylene slide blocks and bronze bush.
· Single-point safety release with dual safety design.
. Clear-floor design provides unobstructed floor use.
. Overhead safety shut-off device prevents vehicle damage.
MODEL PV12 SPECIFICATIONS
*SPECIAL LOW HEIGHT SETTING REQUIRES PURCHASE OF EXTRA CABLES
Model
Style
Lifting
Capacity
Lifting
Time
Lifting
Height
Overall Height
Overall
Width
Width
Between
Columns
Minimum
Pad Height
Motor
PV12
Clear-floor
Direct-drive
5.5 T/
12,000 LBS
55S
72 ½” –
81 1/2”
150”* /
165” (13'9") /
177”(14'9")
150 3/4"
(w/o
power unit)
123 1/2"
4 1/2"
2.0HP

4
Arm Swings View
For Model PV12
Fig. 2

5
II. INSTALLATION REQUIREMENT
A. TOOLS REQUIRED
B. Rotary Hammer Drill (3/4" bit)
✓Hammer
✓Level
✓Crescent Wrench (12")
✓Ratchet With Socket (28mm)

✓Carpenter’s Chalk
✓Screwdrivers
✓Tape Measure (25')
✓Pliers
✓Socket Head Wrench (3mm,
5mm, 8mm)
Locking Pliers
Wrench set
(10mm, 13mm, 14mm, 15mm, 17mm,
19mm, 24mm ,27mm, 30mm)
Fig. 3