AUTOLAND Scientech VEDIS 3 Installation guide

VeDiS3 Hardware Features
VeDiS3 Basic Functions
COPYRIGHT 2018 Reserve the right to amend the texts. V1.00
Features Overview
8”TFT LCD Touch Screen
CR2032 PCB Battery
For Perpetual Calendar USB Port x 2 (Master)
Software Update
Connect VeDiS3 to Internet then select [UPDATE],
system will detect if new software updates are available.
Vehicle Diagnostic
Package includes diagnostic and setting functions
for Asian Cars, European Cars, US Cars, Supercars,
and Trucks.
Setting
For basic system setting and
VeDiS3 system information.
J2534
Supports J2534 interface standards to
work with vehicle OBDII systems.
Support On Demand (SOD)
SOD offers capability for distributors or tech-support team
to remotely utilizing licensed OEM software to perform
diagnostic, programming, coding or repair guide.
Technical Hotline
Through remote control software, distributors or
tech-support team can remotely operate
VeDiS3 and perform necessary functions.
Speaker
System File Storage
12 ~24V DC Input
15-PIN Diagnostic Adaptor Reset Button
RJ45 Ethernet Cable (F)
USB Port (Slave)
AUTOLAND
SCIENTECH
®

Features Overview
Quick Operational Guide
Fault Code Repair Guide
1. Connect VeDiS3 to vehicle connector via AC-EC4 and corresponding adaptor.
2. After VeDiS3 powered on and ready, select [Diagnosis], then select
vehicle make.
AC-EC 4
1
9
8
16
Ex.
Please refer to Diagnostic Cable Connection Quick Manual for connection instructions by vehicle makes.
Image for illustration only. May differ
from each user's VeDiS3 depending on
the software package purchased.
For most vehicles, OBDII connector is located by the driver's seat under the
dashboard. Some models may have a lid covering the connector.
Attention:
1. Vehicles manufactured before year of 2000 may be equipped with different
connector, or require different connector for different systems. Ex. Toyota
before year of 2000 installed the non-OBDII connector under engine hood.
2. Please use correct diagnostic adaptor to connect with vehicle, otherwise
connection may fail.
OBDII -AC3-16P
Software Download & Update
Printing Function: Using Wifi Printer
3. Click printer icon in tool bar on the top of screen.
4. Page preview on screen. Select designated printer from the top left selection area
to perform printing.
1. Setup WiFi printer network connection. Please consult owner's manual for printer.
2. Connect VeDiS3 to the same network as the Wifi Printer.
Please refer to VeDiS3 and printer owner's manual for detail.
Software Update
1. Select SET UP, then select WiFi connection.
2. After Internet connection is complete, select UPDATE at main page.
3. Entering Software Update, select [Update All] or select [Update] individually.
Step 2 Select Diagnostic Adaptor
Step 3 Diagnostic Connection
Step 1 Locate Vehicle Diagnostic Connector
Repair guide.Click on the fault code, VeDiS3 will
link the user to repair guide database.
(Internet connection is required.)
Select [A Company] to review fault
code related repair guide.
1. 2. 3.