AUTOLIFT MULTILINK F6EVO User manual

INSTRUCTION MANUAL
WHEELCHAIR LIFT
DEVICE
MODEL
ORIGINAL INSTRUCTIONS
06
REVISION
11 / 2019
YEAR

TABLE OF CONTENTS
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
2
1. GENERAL WARNINGS ................................................................................................................................................5
1.1 MANUFACTURER....................................................................................................................................................4
1.2 MARKING.................................................................................................................................................................4
1.3 IDENTIFICATION OF OPERATORS........................................................................................................................5
1.4 STRUCTURE AND USE OF THE MANUAL.............................................................................................................6
1.5 SAFETY –GENERAL RULES..................................................................................................................................7
1.6 WARRANTY ...........................................................................................................................................................10
2. GENERAL DESCRIPTION..........................................................................................................................................12
2.1 COMPONENTS......................................................................................................................................................11
2.2 DIMENSIONS.........................................................................................................................................................12
2.3 TECHNICAL DATA.................................................................................................................................................13
3. FIELD OF USE............................................................................................................................................................15
3.1 INTENDED USE.....................................................................................................................................................14
3.2 IMPROPER USE ....................................................................................................................................................14
4. SAFETY DEVICES......................................................................................................................................................16
5. WARNING SIGNS.......................................................................................................................................................17
6. RESIDUAL RISKS.......................................................................................................................................................18
7. INSTALLATION...........................................................................................................................................................19
7.1 RECEIPT AND INSPECTION.................................................................................................................................18
7.2 STORAGE AND NON-USE OF THE LIFT..............................................................................................................18
7.3 TRANSPORT..........................................................................................................................................................19
7.4 HANDLING .............................................................................................................................................................20
7.5 INSTALLATION ON A VEHICLE ............................................................................................................................20
8. USE .............................................................................................................................................................................22
8.1 NORMAL USE........................................................................................................................................................21
8.2 EMERGENCY USE ................................................................................................................................................24
8.2.1 MANUALLY OPENING THE PLATFORM...............................................................................................................24
8.2.2 EMERGENCY RAISING.........................................................................................................................................25
8.2.3 EMERGENCY LOWERING ....................................................................................................................................26
8.2.4 EMERGENCY LIFT WITH AN EXTERNAL CONTROL UNIT.................................................................................27
8.2.5 EMERGENCY DESCENT WITH AN EXTERNAL CONTROL UNIT.......................................................................28
8.2.6 RESTORING NORMAL CONDITIONS AFTER EMERGENCY MANOEUVRES....................................................29
9. CLEANING..................................................................................................................................................................31
10. MAINTENANCE ..........................................................................................................................................................32
10.1 PERIODIC INSPECTION........................................................................................................................................31
10.2 FREQUENCY OF CHECKS....................................................................................................................................32
10.3 TOPPING UP AND DRAINING THE HYDRAULIC CONTROL UNIT.....................................................................40
11. DEMOLITION AND DISPOSAL ..................................................................................................................................47
12. TROUBLESHOOTING ................................................................................................................................................48
13. WIRING DIAGRAM .....................................................................................................................................................49

TABLE OF CONTENTS
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
3
14. HYDRAULIC DIAGRAM..............................................................................................................................................57
15. SPARE PARTS ...........................................................................................................................................................58
16. ANNEXES………………………………………………………………………….................................................................63

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
4
1.1 MANUFACTURER
AUTOLIFT SRL
Via Trentin 8 –46020 Pegognaga (MN) - Italy
Tel. [phone] –[e-mail]
1.2 MARKING
The lift device is manufactured in compliance with the relevant EC directives applicable on the date of
entering the market. As it is considered a "medical device" pursuant to article 2, point 1), letter a), first
paragraph of directive 2007/47/EC, the device carries a specific identification plate which, in addition to
the specific technical data also includes the CE marking, which guarantees the compliance of the device
to the directives/standards referred to the enclosed Declaration of Conformity.
The plate, a facsimile of which is shown here, is stamped with the data indicating the specific model and
unit.
TENSIONE
SERIE
CARICO MASSIMO
DESIGNAZIONE
24 V dc
FABBRICAZIONE
300 kg
Mese - Anno
SOLLEVATORE PER
AUTOLIFT srl Via Ferri, 3 46020 Pegognaga (MN) Italy Tel. [phone] - [email protected]
F6
GRADO DI PROTEZIONE MINIMO
PRESSIONE IDRAULICA
IP44
250 bar
PERSONE DISABILI
CUSTOMER NAME:
INSTALLER NAME:
DATE OF INSTALLATION:
SERIAL NUMBER:
IT IS PROHIBITED TO REMOVE OR TAMPER WITH THE
IDENTIFICATION PLATE.

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
5
1.3 IDENTIFICATION OF OPERATORS
The lift user is the physical or legal person who purchases it and has it operated by
an operator.
The operator, also defined as the accompanying person, is the person who uses
the device.
A disabled person can be identified as the user and/or operator; their disabilities in
this case must not, however, invalidate the characteristics outlined below.
Operators working with devices designed to transport persons with motor deficiencies or disabilities must
be competent to act in all situations; they must always be mentally aware; they must comply with the
physical and mental requirements for ensuring sufficient reactivity in the event of an emergency or a
hazard. They shall therefore not only acknowledge all the details given in this manual but shall possess
the following characteristics.
PHYSICAL: good eyesight, hearing, coordination, ability to safely perform all the functions required to
use the lift, no disorders or debilitating or disabling infirmities caused by the intake of substances altering
the person's emotional state (e.g. drugs and/or alcohol).
MENTAL: ability to understand and apply the established rules and safety precautions; they shall be
attentive, use common sense to ensure their own safety and that of others; they shall be willing to
correctly and responsibly perform the tasks of assistant and operator during the transport, loading and
unloading of disabled and other passengers.
EMOTIONAL: the operator must be calm and able to cope with stress and use common sense over their
own physical and mental conditions; they must be able to manage normal and abnormal situations,
understanding their own limits and, at the same time, how to deal with an emergency.
TRAINING: this manual and any annexed diagrams and layouts, the hazard warning plates and stickers
applied to the electro-hydraulic lift must be read, studied and fully understood; the operator must be
familiar with the use of the controls and the lift movements, having performed all tests (without loads)
required to learn all the operating phases.
TASKS AND RESPONSIBILITIES: in this context we refer only to the operator's tasks concerning the
use of the lift, which include switching on the power circuit, moving the various parts, assembly and
removal of any optional parts, and maintenance. The operator must therefore be fully familiar with the
safety regulations and relative devices, the use of the controls and the manual emergency devices.
The operator is personally responsible for the use of the lift and its correct operation, maintenance, the
handled load and all actions which are performed within the above-mentioned tasks.

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
6
If any situations occur which could compromise the physical and mental state of the transported person,
following the non-compliance or poor knowledge of the operator, they shall personally be civilly and
criminally liable towards the injured party.
This applies also to any tampering or modifications by the operator of parts or components of the lift
which no longer guarantee its safety and reliability for the transported persons.
Autolift Srl shall bear no liability in the event of such situations occurring.
The user is responsible for distributing this manual to all staff working with the lift.
In addition to complying strictly with the instructions given in this manual, operators
shall not use the lift and shall report directly to their managers, or if they do not have
one, directly to the manufacturer AUTOLIFT srl, concerning any shortcomings or
potentially hazardous situation which may occur.
1.4 STRUCTURE AND USE OF THE MANUAL
USERS AND OPERATORS MUST READ THIS MANUAL PRIOR TO
USING THE LIFT.
This manual aims to provide users and operators with all the information they require to ensure that they
are able both to use the lift appropriately and are able to manage it as independently and safely as
possible.
Before performing any operations on the lift, users and operators must carefully read the instructions
given in this publication.
In the event of any doubt over the correct interpretation of the instructions, contact the AUTOLIFT srl
technical department to obtain the required clarifications.
This manual is an integral part of the lift, it must be kept safely by the purchaser and made available for
use by the operators.
The contents of this manual comply with the Directive 2007/47/EC and were drafted following the
guidelines given in UNI 10893:2000. They also comply with the requirements of ISO 10535:2007.
This manual has 38 pages, including the cover, and annexes (see section 1.6).
Data and drawings are provided as examples only; with a view to the continuous development and
updating of its products, the manufacturer may modify the contents without notice.

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
7
It is prohibited to disclose, edit or use this manual for any other purposes.
In drafting the manual, we have chosen to use a limited number of clear symbols to draw the reader's
attention to important concepts and to make consultation simpler and more immediate.
THE INDICATIONS MARKED BY THIS SYMBOL REPRESENT A
POTENTIAL HAZARD, WITH THE RISK OF PHYSICAL DANGER FOR
THE USERS.
THE INDICATIONS MARKED BY THIS SYMBOL ARE DEEMED
PARTICULARLY IMPORTANT FOR THE OPERATION OF THE LIFT.
THE INDICATIONS MARKED WITH THIS SYMBOL ARE IMPORTANT
FOR COMMUNICATION BETWEEN THE MANUFACTURER AND THE
USER.
THE SPECIFIC INSTALLATION MANUAL IS AVAILABLE FOR THE
INSTALLER.
1.5 SAFETY –GENERAL RULES
The lift must not be operated by untrained persons.
Examine the hydraulic lift carefully before each use. If there are any hazardous
conditions or if you notice unusual noises or movements, do not use the lift and
contact an Autolift agent or authorised workshop for the necessary inspections and
repairs.
Read and comply with the labels and warning symbols affixed to the hydraulic lift or
near the loading area of the vehicle used to transport wheelchairs.
When using the hydraulic lift, a hazardous situation may be caused by parking the
vehicle on a slope.

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
8
Use the lift with the vehicle parked on flat ground, where possible
The vehicle must always be parked safely with the emergency brakes on before
starting to operate the lift.
Make sure that the wheelchair is braked and placed securely on the platform, and
that it does not extend over the edge.
Do not operate with a load of over 300 kg and with any load other than a wheelchair
with passenger.
When using the hydraulic lift, the occupant of the wheelchair should, where possible,
face outwards; i.e. with the larger wheels facing the vehicle.


GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
9
Ensure that there are no persons or objects within the lift's range of action
DO NOT PLACE ARMS, LEGS OR CLOTHING NEAR THE MOVING OR
PROTRUDING PARTS OF THE PLATFORM.
RISK OF CRUSHING AND SHEARING
Unauthorised persons must not stand nearby during the use of the lift, and must not
stand between the vehicle and the platform, even for quick checks with the platform
at a standstill. These checks and adjustments must be performed exclusively by
authorised Autolift staff.
Take care when driving over roads with large humps or dips since the vehicle ground
clearance is reduced at the lift housing.

GENERAL WARNINGS
1
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
10
After completing the lifting operations, replace the lift inside the housing.
Do not drive or manoeuvre the vehicle if the housing is not completely closed.
ALWAYS CHECK THAT THE VEHICLE BATTERY IS SUFFICIENTLY
CHARGED BEFORE USING THE LIFT.
1.6 WARRANTY
Autolift S.r.l. shall not be held liable for malfunctions caused by a failure to comply with the following
instructions:
- Maintain a suitable distance between the fuel tank and the top cover.
If the cover and fuel tank are too close, this could lead to deformations and subsequently make the
entrance and exit phases of the lift difficult.
- External hydraulic unions must be protected by a rust-proofing product.
- The fixing kit must be protected by a rust-proofing product.
- The area below the drainage system must be equipped with heat protection.
- The front, rear and side plastic guards must be assembled.
IT IS FORBIDDEN TO REMOVE GUARDS.

GENERAL DESCRIPTION
2
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
11
2.1 COMPONENTS
1
Stainless-steel housing
6
Flashing movement indicator
2
Bridge plate (rear flap)
7
Push-button panel
3
Jointed drive arms
8
Electrical control unit
4
Aluminium platform
9
Hydraulic power unit
5
Roll stop (front flap)
10
External hydraulic power unit (optional)
The drawing shown represents all models
1
4
5
6
3
9
10
8
7
2

GENERAL DESCRIPTION
2
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
12
2.2 DIMENSIONS

GENERAL DESCRIPTION
2
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
13
2.3 TECHNICAL DATA
Capacity
Kg
300
Weight
Kg
140
Power supply
Volt
12
Max. pressure
bar
250
Platform
mm
760 x 1160
Max. overhang
mm
565
Aux emergency pump
SI
Airborne noise
Db(A)
< 70

FIELD OF USE
3
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
14
3.1 INTENDED USE
The lift is designed for installation on the loading floor of a vehicle designed for transportation of
wheelchair users, within the limits of the performance and capacities indicated in the technical
characteristics.
The lift must only be used by an authorised and trained operator, known as the accompanying person,
who possesses the knowledge and physical requirements to safely perform operations with disabled
persons.
3.2 IMPROPER USE
Anything that is not explicitly referred to in chapter 3.1 is considered IMPROPER USE.
IT IS FORBIDDEN to drive or manoeuvre the vehicle if the housing is not completely
closed.
IT IS FORBIDDEN to climb onto the lift or any of its parts and go up or down while
standing.
IT IS FORBIDDEN to use the lift to transport animals or objects.
IT IS FORBIDDEN to use the lift with the vehicle not parked on a flat surface.
THE MANUFACTURER SHALL BEAR NO RESPONSIBILITY FOR
DAMAGE CAUSED TO PERSONS OR PROPERTY OR TO THE LIFT
ITSELF DUE TO ANY USE OTHER THAN THAT DESCRIBED IN THIS
MANUAL.

SAFETY DEVICES
4
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
15
HYDRAULIC POWWR UNIT EXTERNAL HYDRAULIC POWER UNIT
1
Bridge plate (rear flap)
3
Overload limit valve
2
Roll stop (front flap)
4
Housing safety electromagnet (inside the
rear part of the platform)
1
2
3A
4
3B

WARNING SIGNS
5
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
16
THE LIFT HAS THE FOLLOWING MARKINGS
Read the manual before
using the lift
It is forbidden for untrained
persons to operate the lift
Risk of crushing
IT IS FORBIDDEN TO TAMPER WITH/REMOVE THE MARKINGS.

RESIDUAL RISKS
6
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
17
Although protective measures have been integrated in the lift design, including supplementary protective
measures, the residual risks specified below nevertheless remain.
If a person should insert a body part (hand, arm etc.) inside the levers making up each side of the
machine during the lift's operation, they expose themselves to a crushing/shearing hazard. A further
potential crushing point is the feet between the front flap/platform and the supporting surface (floor).
This risk is considered to be a residual risk and is indicated in the warning applied to the lift.
IT IS FORBIDDEN FOR ANYONE TO APPROACH THE MOVING PARTS.
Potential crushing
points
Potential crushing
points

INSTALLATION
7
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
18
7.1 RECEIPT AND INSPECTION
On receipt of the lift, you must perform the following inspections:
-Check that the supplied items correspond to the order specifications and the transport docket.
-Check that the packaging is intact and that no parts have been broken or damaged during
transportation.
-Carefully check that the devices have not been damaged during transportation and that no parts
have been removed and/or tampered with.
-Check that all documentation necessary for installation has been provided.
IF THE DELIVERED DEVICE DOES NOT COMPLY WITH THESE
REQUIREMENTS, NOTIFY THE MANUFACTURER IMMEDIATELY.
7.2 STORAGE AND NON-USE OF THE LIFT
If the lift is not to be used for a period, proceed as follows:
-Store the lift in a covered location away from the elements.
-All electrical / electronic parts must be kept wrapped to protect against moisture.
-The storage temperature must be between +5°C and +50°C.
-All sliding parts (guides, cylinders etc.) must be protected from dust and rust.
-Do not store for over 6 months. For longer periods of storage, before putting into service contact
the manufacturer to have the lift condition inspected.
STORAGE OF THE LIFT IN CONDITIONS THAT DO NOT COMPLY
WITH THE ABOVE DESCRIPTION SHALL INVALIDATE THE
WARRANTY FOR ANY PARTS TO BE REPLACED.

INSTALLATION
7
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
19
7.3 TRANSPORT
The lift must be transported using a vehicle (van, lorry etc.) of an appropriate size and capacity.
The lift is shipped by the manufacturer packed on a europallet measuring 1800 x 1200 mm.
The total height of the pallet with the lift is 410 mm.
For the weight, refer to the Technical Data chapter

INSTALLATION
7
WHEELCHAIR LIFT
DEVICE
F6 MULTILINK
MODEL
06
11-2019
REVISION
DATE
20
7.4 HANDLING
The packaged lift must be handled by a pallet truck, forklift
truck or similar.
The method used for safe handling must have a load
capacity suited to the load to be transported (see weight
indicated in the Technical Data table).
HANDLING STAFF MUST WEAR: SAFETY SHOES WITH STEEL TOE
CAP AND NON-SLIP SOLES.
MAKE SURE THAT NO UNAUTHORISED PERSONS ARE STANDING
WITHIN THE RADIUS OF ACTION OF THE LIFTING/HANDLING
EQUIPMENT (FORKLIFT TRUCK, PALLET TRUCK ETC.) DURING THE
LIFTING, TRANSPORT AND HANDLING OPERATIONS.
If a cardboard box has been used for packaging, to unpack the lift, cut the cardboard packaging with a
Stanley knife (max. blade length 1 cm) on the 4 sides of the base of the packaging, then lift and remove.
Otherwise, if a wooden crate has been used, remove the nails from the wooden crate starting from the
top and then remove the side walls.
STAFF REMOVING THE PACKAGING MUST WEAR: SAFETY SHOES
WITH STEEL TOE CAP AND NON-SLIP SOLES AND GLOVES.
7.5 INSTALLATION ON A VEHICLE
Installation on a vehicle must be performed exclusively by authorised installers.
Autolift shall bear no liability for injury or damage to property or the machine itself
due to installation on a vehicle not performed by authorised persons.