Autonics TPS20 Series User manual

TPS20 Series
F-7
•DC4-20mA analog signal (2-wire) transmission by
measuring pressure of liquid, gas, and oil.
•High accuracy (±0.3％ F.S.) with stainless steel
diaphragm for various measurement
•Various model for installation environments
: Head type, DIN connector type,
connector cable type
•Built-in zero-point, span adjustment (head type)
Features
Please read “Safety Considerations” in operation manual
before using this unit.
Ordering Information
[Head type] [DIN connector type] [Connector cable type]
G 1 5 F8 TPS20
① ② ③ ④ ⑤ ⑥
(0 to 5kgf/cm2)
1: Write the desired pressure range and it is the default of user pressure range. (select "Z" at ④Pressure range)
For ordering cable, order as CID3-2, CID3-5, CLD3-2, CLD3-5. (sold separately)
Description
① Item TPS20 Pressure Transmitter
② Measurement presssure G Gauge pressure
A Absolute pressure
③ Cable
1 Head type
2 DIN connector type
3 Connector cable type
④ Pressure range
Gauge pressure Absolute pressure
1 0 to 0.2kgf/cm2 -
2 0 to 0.5kgf/cm2 -
3 0 to 1kgf/cm20 to 1kgf/cm2
4 0 to 2kgf/cm20 to 2kgf/cm2
5 0 to 7kgf/cm20 to 7kgf/cm2
6 0 to 10kgf/cm20 to 10kgf/cm2
7 0 to 20kgf/cm20 to 20kgf/cm2
8 0 to 35kgf/cm20 to 35kgf/cm2
9 0 to 70kgf/cm2 -
A 0 to 100kgf/cm2 -
C 0 to 200kgf/cm2 -
F 0 to 300kgf/cm2 -
H 0 to 350kgf/cm2 -
M -760mmHg to 0kgf/cm2 -
O -760mmHg to 1kgf/cm2 -
Q -760mmHg to 7kgf/cm2 -
V -760mmHg to 10kgf/cm2 -
X -760mmHg to 20kgf/cm2 -
Y -760mmHg to 35kgf/cm2 -
Z Others
⑤ Pressure port
P2 R1/2 (with adapter, PT)
P8 R3/8 (with adapter, PT)
F8 G3/8 (standard, PF)
ZZ Others
⑥ User pressure range User pressure range 1

Pressure Transmitter
F-8
TPS30
TPS20
KT-302H
PTF30
A. Recorders
B. Indicators
C. Converters
D. Controllers
E. Thyristor
Power
Controllers
F. Pressure
Transmitters
G. Temperature
Transmitters
H. Accessories
(unit: mm)
● Head type
● DIN connector type
● Connector cable type
※The standard pressure port for above is G3/8.
Dimensions
Connections
Connection Cable (Sold Separately)
M12
Ø14.8
L(m)
Ø5
40
M12
L(m)
Ø5
27.5
Ø14.8
32
● CLD3-2 / CLD3-5● CID3-2 / CID3-5 (unit: mm)
Model L (m) Meterial
CID3-2 2 PVC
CID3-5 5
Model L (m) Meterial
CLD3-2 2 PVC
CLD3-5 5
21 14
34 71
106
G3/8
84
24
21
31 28 42
104
8
G3/8
46.5
27
21
31 62 10
8
M12 ConnectorG3/8
22
15-35VDC
(brown) +V
(blue) GND
+
-
Main Circuit
Current amplier

TPS20 Series
F-9
Series TPS20
Pressure type Gauge pressure Absolute pressure Compound pressure
Rated pressure range 0 to 0.2 to 350kgf/cm20 to 1.0 to 35kgf/cm2-760mmHg to 0 to 30kgf/cm2
Max. pressure range 300% of max. span
Measured materials Liquid, gas, oil (except corrosive environment of stainless steel type 316)
Power supply 15-35VDCᜡ
Permissible voltage range 90 to 110% of rated voltage
Current consumption Max. 50mA
Response time Max. 100ms
Protection circuit Reverse polarity protection circuit
Current output DC4-20mA
Linearity ±0.3％ F.S. (-10 to 50℃), ±0.5％F.S. (50 to 70℃)
Hysteresis ±0.3% F.S.
Temp. Zero Shift ±0.03% F.S.
Temp. Span Shift ±0.03% F.S. (at 25℃)
Load resistance Max. 600Ω
Insulation resistance Over 100MΩ (at 500VDC megger)
Dielectric strength 500VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock 95m/s2
Tightening torque Industrial plug over 5N
Pressure port G3/8t (standard), R3/8, R1/2
Environment Ambient temp. -10 to 70℃, storage: -10 to 70℃
Ambient humi. 5 to 95% RH, storage: 5 to 95% RH
Materials Sealing, diaphragm, connection: stainless steel type 316, O-ring: uoro rubber
Connection +, -
Case structure Drip-proof structure
Approval ᜢ
Weight※1Approx. 350g (approx. 320g) (based on head type)
※1: The weight includes packaging. The weight in parenthesis is for unit only.
※F.S.(Full Scale): It is rated pressure range.
※Environment resistance is rated at no freezing or condensation.
Specications
● Example of external connections
Connector
TPS20
Terminal
24VDC
DC4-20mA
Power 24VDC load 600Ω
Output DC4-20mA 2-wire
+
++
+
-
-
-
-
KRN100
Head type DIN connector type Connector cable type
Pin Pin Function Pin Function
+1 + 1 +
2 2 N.C
3 N.C 3 F.G.
F.G. 4
※In case of head type, remove the top cover.

Pressure Transmitter
F-10
TPS30
TPS20
KT-302H
PTF30
A. Recorders
B. Indicators
C. Converters
D. Controllers
E. Thyristor
Power
Controllers
F. Pressure
Transmitters
G. Temperature
Transmitters
H. Accessories
Troubleshooting
Error Troubleshooting
No outputs
Check the power supply.
Check the polarity (+, -) when wiring cable.
Check the connection part.
Abnormally uctuating output
Check the power supply.
Check the supplied pressure.
Check the pressure line.
Out of zero point output value
Check the power supply.
Check the load resistive value of current output type for a receiver is over 600Ω.
Check the measuring point and transmission distance.
Check the line resistance is below 600Ω.
•When installing the unit on pipe line, use t he hexagon
part of connections not to turn the unit with a pipe
wrench. Do not use the unit with strong vibrations.
•This unit is manufactured with precisely. If you drop or
shock the unit, it may lose the function. Please treat the
unit carefully.
•Store the unit at the place without moisture, dust, and
vibration.
•This product which does not have drive part at sensing
part does not need to repair it. Even though inside
of pressure pipe is normally clean, it needs to take
maintenance once a year as below instructions.
①Check the broken status of outside.
②Check the pressure slot, cleanliness inside, and
corrosion state.
③Short each terminal and check the insulation
resistance between the case and power.
(at 100VDC, over 10MΩ)
④Check zero, span adjustment and linearity by
pressure standards.
•When removing a sensor for maintenance, follow the
below instructions.
①Replace an O-ring which is used once.
②Be sure that diaphragm part is not damaged.
•In case of head type for connecting the power, use a
crimp terminal. (M3.5, max. 7.2mm)
•The connection of this unit should be separated from
the power line and high voltage line in order to prevent
inductive noise.
•Install a power switch or a circuit breaker to supply or
cut off the power.
•Connect the power with the crimp terminals.
•Switch or circuit breaker should be installed nearby
users for convenient control.
•Do not use the unit near the high frequency instruments
(high frequency welding machine & sewing machine,
large capacity SCR controller).
•The unit cannot be repaired due to disassembled
structure.
•The unit is xed with bolt and nut at the both sides of
case. Do not press excessive load (approx. 300kg/cm2),
or it may cause damage to the unit.
•Do not pull the cables with over 30N of tension force.
•Tighten the cable connection part rmly not to enter
water to the cable.
•This product may be used in the following environments.
①Indoor / Outdoor
②Altitude max. 2,000m
③Pollution degree 2
④Installation category II
※We are not responsible for any damages and claims
for careless. Must read the proper usage.
Proper Usage