autoXtreme electronics BlackVue User manual

First Time Setup Guide
BlackVue Dash Camera
SAFETY SYSTEMS
autoxtreme.com.au

CONGRATULATIONS
BlackVue Dash Camera
Congratulations on the purchase of your new BlackVue Dash Camera, Australia’s
leading dash camera. This document is designed to help you set up and use this device
with ease. Keep this in the car or a safe spot, for easy reference if required.
Take a quick look over the diagrams below to get a better understanding of managing video les
from the Dash Camera.
Please ensure your dash camera is plugged in to be operational.
For support call [phone] (AWST)
How to remove the SD card:
• First, unplug the power cord to turn o the dashcam. (SEE DIAGRAM A)
• Then open the cover of the microSD card slot. (SEE DIAGRAM B)
• To remove the microSD card: gently press on the card to release the lock, then carefully pull the card out. (SEE DIAGRAM C)
• To insert the microSD card, gently push the card into the slot until it locks into place and close the cover.
Playing and managing video les using your computer (Windows/Mac)
• Insert the card into the microSD card reader located in your glove box and connect it to a computer.
• Download the optional BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer.
DIAGR AM A
Remove Power Cable
DIAGRAM B
Open S ide Cover
DIAGRAM C
Remove M emory Card
autoxtreme.com.au

APP DOWNLOAD
BlackVue Dash Camera
Take a look below at these simple steps
to get started and make the most of the
benets of this device:
Step 1
Ensure the vehicle is on and running. Wait for the
camera to say ‘BlackVue for your safe drive’.
Download your applicable app by scanning in the
QR code above, or search ‘BlackVue’ in your App
Store.
Open the BlackVue app.
Step 3
If your dash camera does not appear on the
automatic search, be sure to check if your cameras
WiFi is on:
Look for a white light as pictured above.
If OFF, press the Wi connect button on the right
hand side of the camera.
Step 4
Your app will now ask you to wave along the
left hand side of the camera, to conrm you are
connecting to the correct camera (so no one else
can try to also connect to your camera). If you’ve
done this correctly you’ll hear the camera beep.
Step 2
Click ‘Connect to Camera’
Click the ‘+’ icon located in the top right hand corner
The app will now automatically search for your dash camera,
once found click the name “Blackvue_750GPRO-XXXXXX”
How to connect via smartphone:
iOS APP
APP STORE
autoxtreme.com.au
FOR FURTHER SUPPORT CALL [phone] (AWST)
Please refer to your User Manual for more in depth information.
Connect toConnect to
cameracamera
APP STOREANDROID APPiOS APP

USING THE APP
BlackVue Dash Camera
Take a look below at these simple steps
to get started and make the most of the
benets of this device:
Using the Blackvue App:
Step 6
If Prompted to ‘accept, allow or join’ be sure to
accept these or you may not be able to review
or save recorded footage.
Step 5
Take a moment to give your dash camera a memorable
nickname, such as ‘Mikes Dash Camera’ or ‘My
Awesome Car’. This will be remembered in the app.
Step 7
Now that you are connected, click on your dash
cameras name to view a list of videos it has been
recording. You can replay any of these videos to
view a copy.
Step 8
If you nd a video of interest and you need to save
a copy to your smartphone for sharing, click the
Download button located in the top right hand
corner whilst watching a video. Once saved it will
appear in the “Downloaded Videos” section.
autoxtreme.com.au
FOR FURTHER SUPPORT CALL [phone] (AWST)
Please refer to your User Manual for more in depth information.