AV Access HDEX40-L User manual

50m 1080P HDMI Extender
User Manual
HDEX40-L

Introduction
Introduction
Overview
HDEX40-L is a 50m 1080P cost-effective HDMI extender, and offers the
extension of full HD video, 2CH audio and IR pass through up to 50m/164ft
along a single Cat X cable. With a feature set including transmission of
uncompressed 1080p HD video@60Hz, stereo audio, one-way IR pass
through and PoC (Power over Cat X cable). With the PoC inside, the
receiver can be powered by transmitter without additional power adaptor.
The Receiver offers manual EQ DIP settings to adjust transmissions by
distance for optimal signal delivery to the display.
Features
Simple and cost-effective HDMI Extender.
Uncompressed 1080P/60Hz up to 50 meters over Cat 6/6a/Cat 7 cable.
Uncompressed 1080P/60Hz up to 40 meters over Cat 5e cable.
HDMI 1.3b and HDCP 1.4 compliance.
Independent HDMI equalization adjustment button on receiver.
Compact size for easy installation.
Package Contents
Before you start the installation of the product, please check the package
contents:
Transmitter x 1
Receiver x1
Power Adapter (DC 5V 1A) x1
IR Emitter x1
IR Receiver (30 KHz ~ 50 KHz) x1
Mounting Brackets (with Screws) x 4
User Manual x 1

Introduction
Panel
Transmitter
1 2 3 4 5
No.
Name
Description
1 DC 5V
Connect to the power adapter provided. The
receiver can be powered by transmitter.
2 Power LED
ON:
The transmitter is powered on.
OFF: The transmitter is powered off.
3
HDMI In
Connect with HDMI source device
4
UTP Out
Connect to the receiver via Cat X cable.
5
IR Out
Connect to the IR emitter cable provided.
Receiver
1235
46
No.
Name
Description
1 USB 5V
Connect to power source to supply power for the
receiver through this port.
2 Power LED
ON: The receiver is powered on.
OFF: The receiver is powered off.
3
HDMI Out
Connect an HDMI display.
4 EQ
Manual EQ DIP Switch: adjust the maximum
transmission distance to 30m or 50m manually.
30m: The length of Cat X cable connected is less
than or equal to 30m;
50m: The length of Cat X cable connected is more
than 30m and less than or equal to 50m;
5
UTP In
Connect to transmitter via Cat X cable.
6
IR In
Connect to IR receiver cable provided.

Installation and Application
Installation and Application
Brackets Installation
Note: Before installation, please ensure the kit is disconnected from the
power source.
1. Attach the installation bracket to the
enclosure using the screws that were
provided in the package separately. The
bracket height can be adjusted
up/down or bracket face up or down. As
shown in the following figure:
2. Attach the brackets to the surface you
want to hold the transmitter/receiver
against using the screws (provided by others).
Application
Note: Make sure Cat X cable is no more than 30 or 50 meters according to
EQ switch you selected.
Display
Power Supply Blu-ray Player
Remote
4
Connect an HDMI source
to HDMI In port.
3
Switch EQ to 30m or 50m, use single
Cat X cable to connect the transmitter
and receiver.
1
Connect a display to
HDMI Out port.
5
Connect IR Emitter
cable to IR Out port.
2
Connect IR
Receiver
cable to IR
In Port.
6
Connect the
power adapter
provided to
transmitter.
Transmitter
Receiver

Specifications
Specifications
Technical
Video Signal Type
HDMI 1.3b with HDCP 1.4
Input/Output
Resolution Support
1920x1080i8, 1920x1080P8, 1280x720P8,
720x568P8, 720x568i8,720x480P8, 720x480i8
8 = 60 Hz
Audio Format
Supported
PCM 2.0
Max Data Rate
6.75 Gbps
General
Operating
Temperature
0°C to + 45°C (32 to + 113 °F)
Storage Temperature
-20 to +70°C (-4 to + 158 °F)
Humidity
20% to 90%, non-condensing
Power Consumption
(Maximum)
2.5W (pair)
Device Dimensions
(W x H x D)
70 mm ×20 mm ×70.2 mm/
2.75'' x 0.79'' x 2.76''
Product Weight
Transmitter/Receiver: 0.2kg/0.44lb
Transmission Distance
Note: We recommend the use of T568B straight-through Category cables.
Cable Type Range Supported Video
HDMI
Input/Output: 5m/16ft
1080P@60Hz
Cat 5e
40m/131ft
1080P@60Hz
Cat 6/6a/7
50m/164ft

Warranty
Warranty
Products are backed by a limited 1-year parts and labor warranty. For the
following cases AV Access Technology Limited shall charge for the service(s)
claimed for the product if the product is still remediable and the warranty
card becomes unenforceable or inapplicable.
1. The original serial number (specified by AV Access Technology Limited)
labeled on the product has been removed, erased, replaced, defaced
or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired,
dismantled or altered by anyone that is not from an AV Access
Technology Limited authorized service partner. The defects are caused
by the fact that the product is used or handled improperly, roughly or
not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited
to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but
not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of
these cases above and to make changes to them at any time without
notice.
Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails:
General Enquiry: [e-mail]
Customer/Technical Support: [e-mail]