Avalue Technology EMX-ZXEDP User manual

Part No. E2047MXZX00R
EMX-ZXEDP
Onboard Zhaoxin E KX-6000 series 4 core BGA CPU up to
35W Mini ITX Motherboard
User’s Manual
1st Ed –11 December 2020

EMX-ZXEDP User’s Manual
2 EMX-ZXEDP User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2020 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
EMX-ZXEDP User’s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

EMX-ZXEDP User’s Manual
4 EMX-ZXEDP User’s Manual
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Avalue, or which have been subject to
misuse, abuse, accident or improper installation. Avalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Avalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPU type and speed, Avalue’s products model name, hardware & BIOS
revision number, other hardware and software used, etc.) Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material
authorization) number from your dealer. This allows us to process your good
return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales
receipt) in a shippable container. A product returned without proof of the
purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaid to your dealer.

User’s Manual
EMX-ZXEDP User’s Manual
5
Content
1. Getting Started............................................................................................................8
1.1 Safety Precautions....................................................................................................8
1.2 Packing List...............................................................................................................8
1.3 Document Amendment History .................................................................................9
1.4 Manual Objectives...................................................................................................10
1.5 System Specifications.............................................................................................11
1.6 Architecture Overview—Block Diagram..................................................................15
1.7 Expansion design....................................................................................................16
2. Hardware Configuration...........................................................................................17
2.1 Product Overview....................................................................................................18
2.2 Jumper and Connector List.....................................................................................19
2.3 Setting Jumpers & Connectors ...............................................................................21
2.3.1 Serial port 1 pin9 signal select (JRI1) ............................................................................................ 21
2.3.2 Serial port 1 pin9 signal select (JRI2) ............................................................................................ 21
2.3.3 Clear CMOS (JCMOS1)................................................................................................................. 22
2.3.4 AT/ATX Power Mode Select (JSATX1).......................................................................................... 22
2.3.5 LVDS Back Light power selection (JSBKL1).................................................................................. 23
2.3.6 General purpose I/O connector (DIO1).......................................................................................... 23
2.3.7 Power connector (PWR1)............................................................................................................... 24
2.3.8 SATA Power connector (SPWR1).................................................................................................. 24
2.3.9 USB connector (USB1) .................................................................................................................. 25
2.3.10 USB connector (USB2).................................................................................................................. 25
2.3.11 LPC connector (JLPC1)................................................................................................................. 26
2.3.12 Miscellaneous setting connector (JSPI1) ...................................................................................... 26
2.3.13 Speaker connector (SPK1)............................................................................................................ 27
2.3.14 Front Panel connector (FPT1)....................................................................................................... 27
2.3.15 Front Panel connector (FPT2)....................................................................................................... 28
2.3.16 System fan connector 1 (JFAN1) .................................................................................................. 28
2.3.17 System fan connector 2 (JFAN2) .................................................................................................. 29
2.3.18 Serial port connector (COM1)........................................................................................................ 29
2.3.19 Serial port connector (COM2)........................................................................................................ 30
2.3.20 Serial Port2 RS485/422 Mode connector (JRS485_1) ................................................................. 30
2.3.21 Serial Port2 RS485/422 Mode connector (JRS485_2) ................................................................. 31
2.3.22 Front Audio connector (FAUD1).................................................................................................... 31
2.3.23 SMBus connector (JSMB1)........................................................................................................... 32
2.3.24 PS/2 keyboard & mouse header (KBMS1).................................................................................... 32

EMX-ZXEDP User’s Manual
6 EMX-ZXEDP User’s Manual
2.3.25 LCD Inverter connector (JBKL1) ................................................................................................... 33
2.3.26 EC Debug (JEC_DEBUG1)........................................................................................................... 33
2.3.27 eDP-Panel connector (EDP 1)....................................................................................................... 34
2.3.28 JVGA1 connector (JVGA1)............................................................................................................ 34
2.3.29 LVDS connector (LVDS1).............................................................................................................. 35
2.3.30 Serial Port3-6 connector (COM3-6)............................................................................................... 36
3.BIOS Setup....................................................................................................................37
3.1 Introduction .............................................................................................................38
3.2 Starting Setup .........................................................................................................38
3.3 Using Setup ............................................................................................................39
3.4 Getting Help............................................................................................................40
3.5 In Case of Problems................................................................................................40
3.6 BIOS setup..............................................................................................................41
3.6.1 Main Menu...................................................................................................................................... 41
3.6.1.1 System Language.................................................................................................................. 41
3.6.1.2 System Date.......................................................................................................................... 41
3.6.1.3 System Time.......................................................................................................................... 41
3.6.2 Advanced Menu ............................................................................................................................. 42
3.6.2.1 Trusted Computing................................................................................................................ 42
3.6.2.2 ACPI Settings ........................................................................................................................ 43
3.6.2.3 Super IO Configuration.......................................................................................................... 44
3.6.2.3.1 Serial Port 1 Configuration .................................................................................................... 45
3.6.2.3.2 Serial Port 2 Configuration .................................................................................................... 45
3.6.2.3.3 Serial Port 3 Configuration .................................................................................................... 46
3.6.2.3.4 Serial Port 4 Configuration .................................................................................................... 47
3.6.2.3.5 Serial Port 5 Configuration .................................................................................................... 47
3.6.2.3.6 Serial Port 6 Configuration .................................................................................................... 48
3.6.2.4 EC 8528 HW monitor............................................................................................................. 49
3.6.2.4.1 Smart Fan Configuration ....................................................................................................... 49
3.6.2.5 S5 RTC Wake Settings.......................................................................................................... 51
3.6.2.6 CPU Configuration................................................................................................................. 51
3.6.2.7 USB Configuration................................................................................................................. 52
3.6.2.8 CSM Configuration ................................................................................................................ 53
3.6.2.9 NVMe Configuration .............................................................................................................. 54
3.6.2.10 Network Stack Configuration................................................................................................. 54
3.6.2.11 Intel(R) I210 Gigabit Network Connection –00:04:5F:A8:17:DE.......................................... 55
3.6.2.11.1 NIC Configuration.................................................................................................................. 55
3.6.2.12 Intel(R) I210 Gigabit Network Connection –00:04:5F:A8:17:DF.......................................... 56
3.6.2.12.1 NIC Configuration.................................................................................................................. 57
3.6.2.13 Intel(R) I210 Gigabit Network Connection –00:04:5F:A8:17:E0........................................... 58

User’s Manual
EMX-ZXEDP User’s Manual
7
3.6.2.13.1 NIC Configuration.................................................................................................................. 58
3.6.3 Chipset ........................................................................................................................................... 59
3.6.3.1 North Bridge........................................................................................................................... 60
3.6.3.1.1 Video Configuration............................................................................................................... 60
3.6.3.1.2 PCIE Configuration................................................................................................................ 61
3.6.3.2 South Bridge.......................................................................................................................... 62
3.6.3.2.1 USB Configuration................................................................................................................. 63
3.6.3.2.2 SATA Configuration............................................................................................................... 63
3.6.3.2.3 HDAC Configuration.............................................................................................................. 64
3.6.3.3 Board & Panel Configuration................................................................................................. 65
3.6.4 Security........................................................................................................................................... 66
3.6.4.1 Secure Boot ............................................................................................................................... 67
3.6.4.1.1 Restore Factory Keys............................................................................................................ 68
3.6.4.1.2 Key Management................................................................................................................... 68
3.6.5 Boot................................................................................................................................................ 69
3.6.6 Save & Exit..................................................................................................................................... 70
3.6.6.1 Save Changes and Reset...................................................................................................... 70
3.6.6.2 Discard Changes and Reset.................................................................................................. 70
3.6.6.3 Restore Defaults.................................................................................................................... 71
3.6.6.4 Launch EFI Shell from filesystem device .............................................................................. 71
4. Drivers Installation.......................................................................................................72
4.1 Install VGA Driver....................................................................................................73
4.2 Install Audio Driver..................................................................................................74
4.3 Install LAN Driver....................................................................................................75
4.4 Install Fintek Serial Patch Driver.............................................................................77
5. Mechanical Drawing ....................................................................................................78

EMX-ZXEDP User’s Manual
8 EMX-ZXEDP User’s Manual
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EMX-ZXEDP motherboard
1 x SATA cables
1 x I/O Shield

User’s Manual
EMX-ZXEDP User’s Manual
9
1.3 Document Amendment History
Revision
Date
By
Comment
1st
December 2020
Avalue
Initial Release

EMX-ZXEDP User’s Manual
10 EMX-ZXEDP User’s Manual
1.4 Manual Objectives
This manual describes in details Avalue Technology EMX-ZXEDP Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to
be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to set up
EMX-ZXEDP or change the standard configurations. Whilst all the necessary information is
available in this manual we would recommend that unless you are confident, you contact
your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors regarding this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

User’s Manual
EMX-ZXEDP User’s Manual
11
1.5 System Specifications
System
CPU
Zhaoxin E KX-6000 series 4 core BGA CPU Up to 35W max
BIOS
ByoCore or AMI uEFI BIOS, 256Mbit SPI Flash ROM
System Chipset
SOC
I/O Chip
ITE IT8528E
System Memory
Two 260-pin DDR4 2400/2666 MHz SO-DIMM socket, supports up to 32GB Max
(non ECC only)
Watchdog Timer
H/W Reset, 1sec. –65535sec./min.1sec. or 1min. step
H/W Status
Monitor
CPU temperature monitoring
Voltages monitoring
CPU fan speed control
TPM
Nationz (国民技术), Z32H330TC-SQN-611, SPI Interface TCM chip by BOM
optional
EEPROM
64Mbit SPI Flash ROM
Expansion Slot
mPCIe
1x Mini PCI-e (support PCIe x1/USB 2.0 Signal, no SATA signal)
M.2
1 x M.2 Type B 3042/2242/2260 (USB 3.0, SATA Signal) with 1 x SIM card slot,
support WWAN+GNSS or SSD with 1 x SIM card slot
Storage
M.2
1 x M.2 Type B 3042/2242/2260 (USB 3.0, SATA Signal) with 1 x SIM card slot,
support WWAN+GNSS or SSD with 1 x SIM card slot
SATA
1 x SATA III Share with Gold Finger SATA port by switch IC
Edge I/O
LAN
2 x Intel® I210AT co-lay I211AT PCI-e Gigabit Ethernet
1 x Intel® I210AT co-lay I211AT PCI-e Gigabit Ethernet
USB 3.1
4 x USB 3.1 Gen1
NOTE: USB4 (PCIe to USB Switch IC)的兩個 port,無法喚醒 S3 & S4
HDMI
2 x HDMI (HDMI1 share with LVDS, default LVDS)
DC Input
1 x DC in +12V~24V 4-pin
Onboard I/O
COM
COM:
COM 1 & COM2: Support RS232/422/485 selected by BIOS selection
2 x 2 x 3 pin, pitch 2.00mm connector for COM 1~2 support RS232 with Pin
9,+5V/+12V/RI by jumper
2 x 2 x 3 pin, pitch 2.00mm connector for COM 1~2 support RS422/485 connector,
Pin 5 with +5V

EMX-ZXEDP User’s Manual
12 EMX-ZXEDP User’s Manual
2 x 2 x 5 pin, pitch 2.00mm connector for COM1~2 support RS-232 connector
COM 3~6:
1 x 2 x 20 pin, pitch 2.00mm connector for COM 3~6 support RS-232 connector
USB 2.0
1 x 2 x 5 pin pitch 2.54mm connector for 2 x USB 2.0
1 x 1 x 5 pin pitch 2.54mm connector for 1 x USB 2.0
GPIO
1 x 2 x 10 pin, pitch 2.00mm connector for GPIO: 16 bits & +5VS Level SMBus
SATA Power
1 x SATA power connectors
CPU/System FAN
1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported
1 x 1 x 4 pin, pitch 2.54mm System fan connector with smart fan function supported
Buzzer
1 x Onboard buzzer
Front Panel
1 x 2 x 5 pin, pitch 2.54mm connector for front panel 1
1 x 2 x 5 pin, pitch 2.54mm connector for front panel 2
RTC Battery
1 x 2 Pin Pitch 1.25mm Vertical type battery connector
1 x horizontal type battery connector (Battery cable 170mm length)
AT/ATX Selector
1 x 1 x 3 pin pitch 2.54mm connector for AT/ATX jumper
Clear CMOS
1 x 1 x 3pin, pitch 2.00mm connector for COMS Clear
LVDS
1 x 2 x 20 pin, pitch 1.25mm connector for LVDS
LCD Backlight
Brightness
1 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight connector
(5V/12V)
LPC
1 x 2 x 5 pin, pitch 2.0mm connector for LPC
BIOS SPI
1 x 2 x 4 pin, pitch 2.00mm connector for BIOS SPI
Audio
1 x 2 x 5 pin, pitch 2.54mm connector for front Audio
DC-Input
1 x 2 x 2 pin for DC in power connect
Amp Connector
1 x 4 pin, pitch wafer 2.00mm connector for 6W x 2 Speaker
eDP
1 x 2 x 10 pin, pitch 1.25mm connector for eDP(By BOM optional)
VGA
1 x 2 x 5 pin, pitch 2.0mm connector for VGA
PS2
1 x PS2 KB/MS by pin header
LAN LED
1 x 2 x 3 pin, pitch 2.00mm connector for LAN1 ~LAN3 Activity Indicator LED
Display
Spec. &
Resolution
2 x HDMI 1.4b: 3840 x 2160 @ 30 Hz, 2560 x 1600@ 30 Hz (Note: This resolution is
actual test result. Intel resolution: 4096x2160@24Hz)
VGA (by pin header): 2048 x 1536 @ 60 Hz 1920 x 1080 @60hz
Multiple Display
Triple Display (2 display with clone mode, 1 display with extend mode)
Default: LVDS/HDMI + HDMI+VGA
Audio
Audio Codec
Realtek ALC892 HD Audio Decoding Controller
Amplifier
TI TPA3113D2PWP Stereo Class-D 6W x 2
Ethernet
LAN Chipset
2 x Intel® I210AT co-lay I211AT PCI-e Gigabit Ethernet

User’s Manual
EMX-ZXEDP User’s Manual
13
1 x Intel® I210AT co-lay I211AT PCI-e Gigabit Ethernet
LAN Spec.
10/100/1000 Base-Tx GbE compatible
Mechanical & Environmental Specification
Power
Requirement
DC in +12V~24V 4-pin DC-in
ACPI
Single power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant
Power Mode
AT / ATX mode Switchable Through Jumper
Operating Temp.
0~60°C (32~131°F) w/ 0.5m/s
Storage Temp.
-40~ +75°C
Operating
Humidity
40°C @ 95% Relative Humidity, Non-condensing
Size (L x W)
(Please consult
product
engineers for the
production
feasibility if the
size is larger than
410x360mm or
smaller than
80x70mm)
6.7" x 6.7" (170mm x 170mm)
Weight
0.40 kg
Vibration Test
Random Vibration Operation
1 Test PSD : 0.00454G²/Hz , 1.5 Grms
2 System condition : operation mode
3 Test frequency : 5~500 Hz
4 Test axis : X,Y and Z axis
5 Test time : 30 minutes per each axis
6 IEC60068-2-64 Test Fh
6 Storage : mSATA
Random vibration test (Non-operation)
1 PSD: 0.01818G²/Hz , 3.0 Grms
2 Non-Operation mode
3 Test Frequency : 5-500Hz
4 Test Axis : X,Y and Z axis
5 30 min. per each axis
6 IEC 60068-2-64 Test:Fh

EMX-ZXEDP User’s Manual
14 EMX-ZXEDP User’s Manual
Package Vibration Test:
1 Test PSD : 0.026G²/Hz , 2.16 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes per each axis
5 IEC 60068-2-64 Test Fh
Drop Test
Package drop test
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed
Test Ea : Drop Test
1 Test phase : One corner, three edges, six faces
2 Test high : 96.5cm
3 Package weight : 5Kg
4 Test drawing
OS Information
Win 7 64 bit, Win10 64 bit, Linux
中標麒麟: 中标麒麟桌面操作系统 V7.0 B54
Note: Specifications are subject to change without notice.
User condition suggestion:
EMX-ZXEDP support Triple Display: 2 display with clone mode, 1 display with extend mode
HDMI1 Share with LVDS, default LVDS
Due to limitation of Renesas PCIex1 to 4 USB Switch IC Upd720201, USB 3.0 Port (USB4) PASSMARK
performance testing result is around 1505Mb/s only,
Please refer to Avalue Board Product Design Verification report for detail data.
NeoKylin:
a. EMX-ZXEDP default OS/BIOS in Windows, if customer would like to use NeoKylin, please contact sales
and FAE.
b. Burn-in test in NeoKylin may show COM port error within 24 hours, which limitation result from lack of EC
128 Byte FIFO version and Linux patch driver support.
RS-485 also include RS-422 function but only print RS-485 on PCB due to space limitation. For pin define
please refer to page 30-31

User’s Manual
EMX-ZXEDP User’s Manual
15
1.6 Architecture Overview—Block Diagram
The following block diagram shows the architecture and main components of EMX-ZXEDP.

EMX-ZXEDP User’s Manual
16 EMX-ZXEDP User’s Manual
1.7 Expansion design
Expansion Design –Gold Finger

User’s Manual
EMX-ZXEDP User’s Manual
17
2. Hardware
Configuration

EMX-ZXEDP User’s Manual
18 EMX-ZXEDP User’s Manual
2.1 Product Overview

User’s Manual
EMX-ZXEDP User’s Manual
19
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JRI1/2
Serial port 1/2 pin9 signal select
3 x 2 header, pitch 2.00mm
JATATX1
AT/ATX Power Mode Select
3 x 1 header, pitch 2.54mm
JCMOS1
Clear CMOS
3 x 1 header, pitch 2.00mm
JSBKL1
LVDS Back Light power selection
3 x 1 header, pitch 2.00mm
Connectors
Label
Function
Note
JFAN1/2
System fan connector 1/2
(with smart fan function supported)
4 x 1 wafer, pitch 2.54mm
JSPI1
Miscellaneous setting connector
4 x 2 header, pitch 2.00mm
JEC_DEBUG1
EC Debug
2 x 1 header, pitch 2.00 mm
COM1/2
Serial Port2 connector 1/2
5 x 2 header, pitch 2.00 mm

EMX-ZXEDP User’s Manual
20 EMX-ZXEDP User’s Manual
FAUD1
Front Audio connector
5 x 2 header, pitch 2.54mm
JDIO1
General purpose I/O connector
10 x 2 header, pitch 2.00mm
PWR1
Power connector
2 x 2 wafer, pitch 4.20mm
SPWR1
SATA Power connector 1
4 x 1 wafer, pitch 2.54mm
SPK1
Speaker connector
4 x 1 wafer, pitch 2.00 mm
JFP1/2
Front Panel connector1/2
5 x 2 header, pitch 2.54mm
KBMS1
PS/2 keyboard & mouse header
5 x 2 header, pitch 2.00 mm
LVDS1
LVDS connector
20 x 2 wafer, pitch 1.25mm
EDP1
eDP-Panel connector
10 x 2 wafer, pitch 1.25mm
COM3-6
Serial Port3-6 connector
20 x 2 header, pitch 2.00mm
USB1
USB connector 1
5 x 2 header, pitch 2.54mm
USB2
USB connector 2
5 x 1 header, pitch 2.54mm
JRS485_1/2
Serial Port2 RS485/422 Mode
connector 1/2
3 x 2 header, pitch 2.00 mm
JLPC1
LPC connector
5 x 2 header, pitch 2.00mm
JSMB1
SMBus connector
5 x 1 header, pitch 2.00mm
JVGA1
VGA connector
3 x 2 header, pitch 2.00 mm
USB3/4
USB connector 3/4
SODIMM1/2
206-pin DDR4 SO-DIMM socket
LAN1/2-3
RJ-45 Ethernet 1/2-3
DCIN1
DC Power-in connector
HDMI1/2
HDMI connector 1/2
HEATSINK1
ZX-200 heatsink
GF1
Gold Finger
SIM1
SIM card slot