Avalue Technology BFC-1209 User manual

Part No. E2017B290A0R
BFC-1209
12.1” PCAP EBM-BYT Celeron J1900/HDMI/2 x MPCIE/2 x
USB 3.0/2 x LAN/FANLESS Panel PC
Quick Reference Guide
1st Ed –02 July 2018
Copyright Notice
Copyright 2018 Avalue Technology Inc., ALL RIGHTS RESERVED.

BFC-1209
2 BFC-1209 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
BFC-1209 Quick Reference Guide
3
Content
1. Getting Started............................................................................................................4
1.1 Safety Precautions ................................................................................................4
1.2 Packing List...........................................................................................................4
1.3 System Specifications ...........................................................................................5
1.4 System Overview...................................................................................................7
1.4.1 Rear View..................................................................................................................................... 7
1.5 System Dimensions...............................................................................................8
2. Hardware Configuration.............................................................................................9
2.1 BFC-1209 connector mapping.............................................................................10
2.1.1 External Serial Port connector (COM) ....................................................................................... 10
2.2 Installing Hard Disk & Memory (BFC-1209).........................................................11

BFC-1209
4 BFC-1209 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
1.2 Packing List
1 x BFC-1209 12.1” PCAP EBM-BYT Celeron J1900 / HDMI/ 2 x
MPCIE/ 2 x USB 3.0/ 2 x LAN/ FANLESS Panel PC
1 x AC/DC adapter 12V/5A 90 Plug Type
1 x Power cord

Quick Reference Guide
BFC-1209 Quick Reference Guide
5
1.3 System Specifications
Component
Mother Board
EBM-BYT
CPU
Intel® Celeron® J1900 4-Core 2.0GHz processor
CPU Cooler (Type)
Heatsink
Memory
One 204-pin DDR3L SODIMM Socket, Supports Up to 8GB DDR3L
1333MHz SDRAM
Power Supply
DC in
Adapter
Input: 100~240 Vdc/ 50~60 Hz
Output: +12 Vdc / 5A
(ACC-ADP-060N-04R)
System Fan
Fanless
Speaker
8ohm 2W x 2
Operating System
Windows 7/ 10, Linux
Expansion Card
2 x Mini PCIe slot (1 x SIM Card, 1 x mSATA)
Storage
Hard Disk Drive
Optional 2.5” HDD/ SSD
Solid State Drive
Optional 2.5” SSD
Other Storage Device
1 x CompactFlash Type I/II Socket
Panel
LCD Panel
12.1” 1024 x 768 XGA
CMO G121X1-L03
LCD Control Board
Built-in
Touch Screen
12.1" PCAP H8573A
Touch Controller
EETI EXC3188
External I/O
Serial Port
1 x RS-232/422/485 (default 232)
USB Port
1 x USB 2.0, 1 x USB 3.0
Video Port
1 x HDMI
Audio Port
1 x Line-out (audio jack)
LAN Port
2 x Gigabit LAN
Others
1 x CF Card Slot
Mechanical
Power Type
AT/ATX
Power Connector Type
Lockable DC in
Dimension
292.9 x 225.4 x 49 mm
Weight
3.02 Kg

BFC-1209
6 BFC-1209 Quick Reference Guide
Color
Silver/Black
Fanless
Yes
OS Support
Windows 7/ 10, Linux
Reliability
EMI Test
CE FCC class B
Dust and Rain Test
Front Panel IP65
Vibration Test
Random Vibration Operation
1 PSD: 0.00454G²/Hz , 1.5 Grms
2 Operation mode
3 Test Frequency : 5-500Hz
4 Test Axis : X,Y and Z axis
5 30 min. per each axis
6 IEC 60068-2-64 Test:Fh
Sine Vibration test (Non-operation)
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :30 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Package vibration test
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test:Fh
Mechanical Shock Test
With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms
Drop Test
1 One corner , three edges, six faces
2 ISTA 2A, IEC-60068-2-32 (96.5cm) Test:Ed
Operating Temperature
0 to 40°C
Operating Humidity
0% ~ 90% relative humidity, non-condensing
Storage Temperature
0°C to 70°C
Note: Specifications are subject to change without notice.

Quick Reference Guide
BFC-1209 Quick Reference Guide
7
1.4 System Overview
1.4.1 Rear View
Connectors
Label
Function
Note
COM
External Serial Port connector
DB-9 male connector
HDMI
HDMI connector
LAN1/2
RJ-45 Ethernet 1/2
Power
System power switch
DC IN
DC Power-in connector
RESET
Reset button
HDD
HDD LED
PWR
Power LED
Line-out
Line-out audio jack
CF
Compact Flash card
USB
USB 2.0 connector x 1
USB 3.0 connector x 1

BFC-1209
8 BFC-1209 Quick Reference Guide
1.5 System Dimensions
(Unit: mm)

Quick Reference Guide
BFC-1209 Quick Reference Guide
9
2.Hardware
Configuration
For advanced information, please refer to:
1- EBM-BYT User’s Manual
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

BFC-1209
10 BFC-1209 Quick Reference Guide
2.1 BFC-1209 connector mapping
2.1.1 External Serial Port connector (COM)
RS-232
Signal
PIN
PIN
Signal
DCD
1
6
DSR
RXD
2
7
RTS
TXD
3
8
CTS
DTR
4
9
RI
GND
5
RS-422
Signal
PIN
PIN
Signal
TX-
1
6
NC
TX+
2
7
NC
RX+
3
8
NC
RX-
4
9
NC
GND
5
RS-485
Signal
PIN
PIN
Signal
DATA-
1
6
NC
DATA+
2
7
NC
NC
3
8
NC
NC
4
9
NC
GND
5

Quick Reference Guide
BFC-1209 Quick Reference Guide
11
2.2 Installing Hard Disk & Memory (BFC-1209)
Step 1. Remove 6 screws to release the chassis cover, and remove it.
Step 2. Remove 2 screws to release the HDD bracket.
Step 3.1 Slide HDD into its bracket until properly seated.
Step 3.2 Secure HDD by means of 2 screws.
Step 4. Slide the DDR3L SODIMM into the memory socket and press it down until properly seated.