Avalue Technology WG-1201 User manual

Part No. E20171203A0R
WG 10”/12” Series
10.4”/12.1” Multifunctional Touch Panel PC
Quick Reference Guide
Copyright Notice
Copyright ©2007-2009 Technology Inc., ALL RIGHTS RESERVED.

WG 10”/12” Series
2 WG 10”/12” Series Quick Reference Guide
Contents
1. Getting Started ........................................................................................................3
1.1 Safety Precautions....................................................................................................3
1.2 Packing List...............................................................................................................3
1.3 System Specifications...............................................................................................4
1.4 System Overview......................................................................................................8
1.4.1 Front View................................................................................................................................ 8
1.4.2 Rear View................................................................................................................................ 8
1.5 System Dimensions ..................................................................................................9
1.5.1 WG-1201/1203 Front side and rear........................................................................................ 9
1.5.2 WG-1001/1003 Front side and rear...................................................................................... 10
1.5.3 Bottom and Rear ................................................................................................................... 11
2. Hardware Configuration .......................................................................................12
2.1 Jumper and Connector Setting , Driver and BIOS Installing ...................................13
2.2 Installing Hard Disk & Memory................................................................................14

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 3
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
z1 x WG 10"/12" Series Panel PC
z1 x Quick Reference Guide
z1 x DVD-ROM contains the followings:
—User’s Manual (this manual in PDF file)
—Ethernet driver and utilities
—VGA drivers and utilities
—Audio drivers and utilities
—WiFi drivers and utilities
—Touch controller drivers and utilities
z1 x Power Adapter
z1 x Stand for Panel PC (optional)

WG 10”/12” Series
4 WG 10”/12” Series Quick Reference Guide
1.3 System Specifications
Panel
Model WG-1201 WG-1001
LCD size 12.1”, 4:3 10.4”, 4:3
Display type SVGA XGA SVGA XGA
Resolution 800 x 600 1024 x 768 800 x 600 1024 x 768
Color 262K 262K 262K 262K
Pixel pitch 0.3075mm(H) x
0.3075mm(V) 0.240mm(H) x 0.240mm(V) 0.264mm(H) x 0.264mm(V) 0.20625mm(H) x 0.20625mm(V)
Luminance 450 cd/m² 450 cd/m² 230 cd/m² 300 cd/m²
Contrast ratio 1000 700 500 500
Viewing angle 89(U), 89(D),
89(L), 89(R)
80(U), 80(D),
80(L), 80(R)
55(U), 65(D),
70(L), 70(R)
60(U), 60(D),
70(L), 70(R)
Response time 25 ms 25 ms 25 ms 25 ms
Backlight CCFL CCFL CCFL CCFL
Touch type 5 Wires resistive 5 Wires resistive 4 Wires resistive 5 Wires resistive
Touch interface USB USB
System
Board EBM-CX700
CPU Onboard VIA Eden ULV 1GHz (3.5W), up to 1.6GHz (8W) CPU
BIOS Award, 512KB Flash BIOS
System Chipset VIA CX700M
I/O Chipset VIA VT1211
System Memory One 200-pin DDR2 SODIMM socket, supports up to 1GB DDR2 400/533 SDRAM
SSD One CF socket supports Type I / II Compact Flash Card.
HDD Optional 2.5” SATA HDD or 44-pin enhanced IDE HDD
WiFi Optional USB WiFi 802.11b/g
Watchdog Timer Reset: 1 ~ 65535 sec./min. and 1 min./step
Display VIA CX700M
Audio VIA VT1708A supports 2CH Audio
Ethernet Dual RTL8110SC Gigabit LAN/10/100/1000 Base-Tx Fast Ethernet compatible

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 5
External I/O Ports
COM Port 1 x RS-232
Ethernet Port Dual RTL8110SC Giga LAN
VGA / LCD Port 1 x DB-15
Audio Port Line-out
USB Port 2 x USB 2.0
Power Supply Unit
Power Input 12V
Power Output 5A (60W)
Environment & Mechanical
Operating Temperature -10~60°C (14~140°F) 0~40°C (32~104°F)
Storage Temperature -20 to +75°C (-4~167°F) -20 to +75°C (-4~167°F)
Relative Humidity 5 to 90% @ 40°C (104°F), relative humidity, non-condensing
Dimension (W x D x H) 283 x 222x 45 mm 259 x 196 x 41mm
Weight 2.84 Kgs 2.11 Kgs
Mounting Desktop (VESA Compliance)

WG 10”/12” Series
6 WG 10”/12” Series Quick Reference Guide
Panel
Model WG-1203 WG-1003
LCD size 12.1”, 4:3 10.4”, 4:3
Display type SVGA XGA SVGA XGA
Resolution 800 x 600 1024 x 768 800 x 600 1024 x 768
Color 262K 262K 262K 262K
Pixel pitch 0.3075mm(H) x
0.3075mm(V) 0.240mm(H) x 0.240mm(V) 0.264mm(H) x 0.264mm(V) 0.20625mm(H) x 0.20625mm(V)
Luminance 450 cd/m² 450 cd/m² 230 cd/m² 300 cd/m²
Contrast ratio 1000 700 500 500
Viewing angle 89(U), 89(D),
89(L), 89(R)
80(U), 80(D),
80(L), 80(R)
55(U), 65(D),
70(L), 70(R)
60(U), 60(D),
70(L), 70(R)
Response time 25 ms 25 ms 25 ms 25 ms
Backlight CCFL CCFL CCFL CCFL
Touch type 5 Wires resistive 5 Wires resistive 4 Wires resistive 5 Wires resistive
Touch interface USB USB
System
Board EBM-945GSE
CPU Onboard Intel Atom N270 1.6GHz (2.5W)
BIOS Award 4 Mbit Flash BIOS
System Chipset Intel 945GSE + ICH7-M
I/O Chipset ITE 8712F
System Memory Onboard 1GB DDR2, extra one SODIMM supports up to 2GB 400/533 SDRAM
SSD One CF socket supports Type I / II Compact Flash Card.
HDD Optional 2.5” SATA HDD or 44-pin enhanced IDE HDD
WiFi Optional USB WiFi 802.11b/g
Watchdog Timer Reset: 1 ~ 65535 sec./min. and 1 min./step
Display Intel 945GSE GMCH integrated GMA950 graphics
Audio Realtek ALC 655 supports 5.1-CH Audio
Ethernet Dual Realtek RTL8111C Gigabit LAN, supports wake on LAN

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 7
External I/O Ports
COM Port 1 x RS-232/422/485 setting by BIOS*, optional extra 1 x RS-232/422/485
Ethernet Port Dual RTL8111C Giga LAN
VGA / LCD Port 1 x DB-15
Audio Port Line-out
USB Port 2 x USB 2.0
Power Supply Unit
Power Input 12V
Power Output 5A (60W)
Environment & Mechanical
Operating Temperature 0~60°C (32~140°F) 0~40°C (32~104°F)
Storage Temperature -20 to +75°C (-4~167°F) -20 to +75°C (-4~167°F)
Relative Humidity 5 to 90% @ 40°C (104°F), relative humidity, non-condensing
Dimension (W x D x H) 283 x 222x 45 mm 259 x 196 x 41mm
Weight 2.84 Kgs 2.11 Kgs
Mounting Desktop (VESA Compliance)
Note: *To know more detail of RS232/422/485 setting by BIOS, please refer to chapter 2.1.

WG 10”/12” Series
8 WG 10”/12” Series Quick Reference Guide
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
Connectors
Label Function Note
POWER Power on button
CF CF Type I/II Socket with Ejector Optional for 2nd COM port
COM Serial port DB-9 male connector
LINE OUT Line-out audio jack
USB 2 x USB 2.0 connector Dock USB
LAN1 RJ-45 Ethernet connector 1
LAN2
(KB/MS) RJ-45 Ethernet connector 2
(LAN2 is default, KB/MS is optional)
HDD HDD indicator
PWR System power indicator
VGA CRT connector DB-15 female connector
RESET Reset button
DC-IN DC Power-in connector
POWER

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 9
1.5 System Dimensions
1.5.1 WG-1201/1203 Front side and rear

WG 10”/12” Series
10 WG 10”/12” Series Quick Reference Guide
1.5.2 WG-1001/1003 Front side and rear
(Unit: mm)

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 11
1.5.3 Bottom and Rear
Note: The M3*3 screw holes are reserved for WG SeriesPanel Mount Brackets. Improper usage
may harm the mechanical parts.
M3*3

WG 10”/12” Series
12 WG 10”/12” Series Quick Reference Guide
2.Hardware
Configuration

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 13
2.1 Jumper and Connector Setting , Driver and BIOS Installing
2.1.1 WG-1003/1203 RS232/422/485 setting by BIOS
The COM port setting of WG-1003/1203, which applying EBM-945GSE M/B, can be
configured by BIOS. The path is shown as below.
[BIOS Menu] Æ[Integrated Peripherals] Æ[Super IO Device]
Æ[COMPORT 232/422/485]
The panel backlight of WG-1003/1203, which applying EBM-945GSE M/B, can be
configured by BIOS as well. The path is shown as below.
[BIOS Menu] Æ[Advanced Chipset Features] Æ[LVDS Back Light]
To know more about other settings, please refer to EBM-CX700, EBM-945GSE Quick
Installation Guide or User’s Manual.

WG 10”/12” Series
14 WG 10”/12” Series Quick Reference Guide
2.2 Installing Hard Disk & Memory
Step 1. Unfasten 6 screws from the case. Then take off the top chassis.
Step 2. Insert the SODIMM into the memory socket.

Quick Reference Guide
WG 10”/12” Series Quick Reference Guide 15
Step 3-1. HDD Installation: Insert the cable to connect the HDD and the SATA connecter.
Step 3-2. SATA HDD Installation: By default, the SATA cables had been inserted to the
according connectors. Just connect to SATA HDD with the two cables.
IDE Connector
SATA Connector
SATA wire
SATA cable

WG 10”/12” Series
16 WG 10”/12” Series Quick Reference Guide
Step 3-3. Insert the HDD into the Drive Bay. Remember to place the HDD down to the
bottom exactly in order to screw the device tightly.
Step 4. Place back the chassis with 6 screws locked.
HDD