Avantco 177CFD10 User manual

User Manual
www.AvantcoEquipment.com
11/2023
#177CFD10 10 Tray with Removable Door • 120V • 1000W
Models:
Stainless Steel
Food Dehydrator
Please read and keep these instructions. Indoor use only.
Note:
Improper installation, adjustment, alteration, service, or
maintenance can cause property damage, injury, or death.
Read the installation, operating, and maintenance instructions
thoroughly before installing or servicing this equipment.
Warning:
Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
For Your Safety:

User Manual
Stainless Steel Food Dehydrator
2
www.AvantcoEquipment.com
Table of Contents
Safety Precautions .....................................................................................................................................3
Parts Identification .....................................................................................................................................4
Before Using Your Dehydrator................................................................................................................4
Operation .....................................................................................................................................................5
Dehydrating Tips ........................................................................................................................................5
Parts Diagram..............................................................................................................................................6
Circuit Diagram ...........................................................................................................................................7
Cleaning & Maintenance..........................................................................................................................7
Troubleshooting..........................................................................................................................................8
CONFORMS TO NSF STD NSF8
4010483
NEMA
5-15P

User Manual
Stainless Steel Food Dehydrator
3
www.AvantcoEquipment.com
WARNING
• Read all instructions carefully and completely.
• For commercial use only.
• Do not touch hot surfaces.
• Protect against electrical shock by keeping all cords, plugs, and other electrical components away
from water or other liquids.
• Unplug this unit when not in use and before cleaning.
• Allow the unit to cool before putting on or taking o parts.
• Do not operate this or any appliance with a damaged electrical cord or plug.
• Do not operate this or any appliance after it has malfunctioned or been damaged in any way.
• Do not use outdoors.
• Do not place on or near a hot gas or electric burner.
• Attach plug to appliance first, then plug electrical cord into the wall outlet.
• Disconnect the unit by turning the power switch to “OFF,” then removing the electrical plug from the
wall outlet.
• Do not use appliance for any application other than intended use.
• Do not insert metal utensils or oversized foods into this unit, as they may cause a fire and heighten
the risk of electrical shock.
• Do not store any item on top of this unit when in operation.
• Do not allow this dehydrator to touch or be covered by flammable material, such as curtains,
draperies, walls, etc. when in operation.
• Do not clean with metal scouring pads, as pieces can break o and touch electrical components,
heightening the risk of electrical shock
• Never place materials such as paper, cardboard, plastic, etc. in this dehydrator.
• Do not cover interior of this unit with metal foil, as it may cause the dehydrator to overheat.
• Avoid scratching the surface or nicking the edges of this unit. Do not put sharp articles beyond the
net interior; it may choke the fan and cause product failure.
• Note that the use of accessories not recommended by the manufacturer may result in injury.
• Children should be supervised to ensure that they do not play with the dehydrator.
• Place unit on a flat surface that is well ventilated.
Safety Precautions

User Manual
Stainless Steel Food Dehydrator
4
www.AvantcoEquipment.com
Parts Identification
Before Using Your Dehydrator
1. Remove from box.
2. Remove rack supports, door, and stainless steel racks (tape will be holding them in).
3. Using a small amount of detergent, wash the handle and food racks with soapy water.
NOTE: DO NOT use a spray or abrasive polishing agent.
4. Wipe down interior with a damp cloth.
• While washing this unit, DO NOT touch the electrical heating element and fan.
• DO NOT soak the inside of the dehydrator with water.
5. After washing and drying, re-assemble the unit.
6. Plug in and turn it to its highest temperature setting for 5 minutes.
7. Turn o the heating elements and open the dehydrator front panel in order to remove any smoky
residue from inside the dehydrator. The heating elements are well lubricated and this initial use will
help burn o the extra grease. A light amount of smoke is normal during this process.
Before drying anything in your dehydrator for the first time, please follow these simple instructions:
Power Switch
Temperature
Control Knob
Foot
Power Cord
Timer
Body
Door
Food Rack
Door Handle

User Manual
Stainless Steel Food Dehydrator
5
www.AvantcoEquipment.com
Operation
Dehydrating Tips
CAUTION: During the dehydrating process, make sure that no metal accessory comes in
contact with the electrical fan and heating elements.
CAUTION: Foods dehydrated in this unit will be hot. Wear protective hand coverings when
reaching into dehydrator to retrieve food.
1. Remove food racks from the unit and load product onto them. Be sure to not overcrowd the racks.
2. Place the loaded food racks into the dehydrator. Be sure there is enough space in between racks
for proper airflow.
3. Slide the door into place using the door handle.
4. Plug your dehydrator into an appropriate outlet.
5. Turn the power switch to ON. The power light will illuminate.
6. Set your desired temperature using the temperature control knob.
• The temperature range of this unit is 85-160°F on 120V models.
• This thermostatic switch controls the temperature inside the dehydrator and helps to maintain
the proper temperature during various dehydrating applications.
7. Set your desired drying time by using the timer knob.
• The timer has a range of 0 to 12 hours.
• If you need to reset the dehydrating time while the dehydrator is in operation, simply turn the
timer to a new position. The dehydrator will reset the time according to the revised requirement
without needing to be turned o.
8. When the set dehydrating time has been reached, the unit will alert you and the heating elements/fan
will shut o.
9. Using protective hand coverings, carefully remove the food racks from the unit.
10. Repeat the process for multiple batches.
11. When finished, turn the machine o using the power switch and unplug from the outlet.
• Use dierent temperatures for dierent foods, and use the best quality foods.
• Fruits and vegetables in peak season have more nutrients and flavor.
• Do not use foods with bruises or blemishes.
• Meats should be lean and fresh. Remove as much fat as possible before dehydrating.
• Do not overlap foods. Lay foods out flat on the trays.
• Check the dryness after a few hours, and then check every two hours until dehydration is complete.
• Cut down the center of a few samples to check internal dryness. If there is moisture, dehydrate longer.

User Manual
Stainless Steel Food Dehydrator
6
www.AvantcoEquipment.com
Parts Diagram
Part # Description Item #
1 Power Cord 177PCFDP1
2 Block Terminal
3 Rear Board
4 Fan Assembly 177PCFDP4
5 Thermostat 177PCFDP5
6 Insulation Plate
7 Right Rack Assembly 177PCFDP7
8 Timer 177PCFDP8
9 Temperature Limiter 177PCFDP9
10 Thermostat Holding Plate
11 Heating Element Assembly 177PCFDP11
12 Shell
Part # Description Item #
13 Foot 177PCFDP14
14 Tray
15 Quarries Net 177PCFDP16
16 Front Panel 177PCFDP17
17 Handle 177PCFDP18
18 Left Rack Assembly
19 Top Board
20 Control Board Plate 177PCFDP21
21 Switch 177PCFDP22
22 Timer Knob 177PCFDP23
23 Thermostat Knob

User Manual
Stainless Steel Food Dehydrator
7
www.AvantcoEquipment.com
Circuit Diagram
Cleaning & Maintenance
1. Turn unit o and wait for it to cool.
2. Unplug the cord from the wall.
3. Remove the racks, rack supports, and door.
4. Clean and sanitize rack supports, rack, and door. Allow to dry.
5. Wipe and clean the interior of the unit using warm water and a damp cloth or sponge. Allow to dry.
6. Reassemble when dry and store.
CAUTION: While washing this unit, DO NOT touch the electrical heating element and fan.
CAUTION: DO NOT soak the inside of the dehydrator with water.

User Manual
Stainless Steel Food Dehydrator
8
www.AvantcoEquipment.com
Troubleshooting
Issue Possible Problem Solution
The dehydrator does not work
after being switched on.
No power to unit. Make sure the dehydrator is plugged in and
power is going to outlet.
Timer not set. Set the time using the timer knob.
Temperature not set. Set the temperature using the temperature
control knob.
Heating element/fan motor failure. Contact service agent.
DO NOT attempt to dismantle the unit.
Food is often over dried or not
dried, even when operating
according to recipe.
Overcrowding on food racks.
Make sure food is laid out flat, with enough
room between each product on the racks and
that racks are spaced apart vertically to allow
for suitable airflow.
Fan motor failure. Contact service agent.
DO NOT attempt to dismantle the unit.
Temperature control knob failure. Contact service agent.
DO NOT attempt to dismantle the unit.