Help
Setting Up this Device
The Avaya HC020 Camera can be used as a first or
additional camera on XT4300, XT5000, and XT7100.
Please follow the following instructions to connect and
use the HC020 Camera.
© 2020 Avaya Inc. All Rights Reserved. Avaya and the Avaya logo are trademarks of Avaya Inc. and are
registered in the United States and other countries. All other trademarks identified by ®, TM, or SM are regis-
tered marks, trademarks, and service marks, respectively, of Avaya Inc. 04/20 • 700514525 Avaya IX Huddle
Camera HC020 Quick Setup Guide
1. Use the HC020 Camera as a main
camera
Step 1.
Insert the USB connector to its socket at the rear of the
camera.
Step 2.
Attach the USB connector to the USB upper socket at
the rear of the XT Series endpoint (XT4300, XT5000 or
XT7100).
Step 3.
If using the HC020 as a first camera, you should enable
it as the Default Camera in: Configure > Advanced > I/O
connections > Cameras > General > Default Camera:
USB
• Please remove the adhesive transparent film in front
of the lens before using the camera.
• The video signal is captured from the USB port of the
XT unit. The USB port is also used for camera control.
XT5000 or XT4000 Series Codec Unit
connect the USB cable to USB2
(upper USB connector)
connect the USB cable to USB2
(upper USB connector)
XT7000 Series Codec Unit
About Avaya
Businesses are built on the experiences they provide
and every day millions of those experiences are built
by Avaya (NYSE:AVYA). For over one hundred years,
we’ve enabled organizations around the globe to win—
by creating intelligent communications experiences for
customers and employees. Avaya builds open, converged
and innovative solutions to enhance and simplify
communications and collaboration—in the cloud, on
premise, or a hybrid of both. To grow your business, we’re
committed to innovation, partnership, and a relentless
focus on what’s next. We’re the technology company you
trust to help you deliver Experiences that Matter. Visit us
at www.avaya.com.
CAUTION:
Make sure all units are switched off whenever
connecting or disconnecting devices.
2. Use the HC020 Camera as a USB
camera for your Avaya IX Workplace
or Spaces client
Step 1.
Connect the HC020 Camera to your laptop. To ensure
an optimal camera performance, please connect it to a
USB3 port. Connecting the camera to a USB2 port may
bring an insufficient power to the camera, and does not
guarantee optimal behavior in all the possible scenarios
and all possible laptop models.
Step 2.
Launch the Avaya IX Workplace or Spaces client and
select the device (Avaya HC020) from the Settings >
User Preferences.
Step 3.
Under this configuration, the HC020 camera can be
controlled using the remote control provided.
Note: starting from version 8.4.037, the HDMI port is
disabled by default. It is possible to enable it through the
camera “Setting” menu that can be recalled in overlay
using the camera remote control and pressing the menu
button.
P/N 700514525 B02
