Avaya HC020 User manual

Avaya HC020 Camera
Quick Setup Guide
Package Content:
Congratulations on purchasing your PTZ
HC020 Camera for the Avaya Scopia®
XT Series. This brings a high quality 4K
sensor video source to your endpoint,
with HD 1080p 30 frames per second
(fps), including 8x Digital zoom, and an
optimal horizontal field of view for video
conferencing rooms.
• Avaya HC020 Camera
• 3m USB Cable
• Remote Control
• Remote control Batteries

P/N 700514525 A02
Setting Up this Device
1. Use HC020 Camera as main camera
2. Use HC020 Camera as USB camera for your Equinox client
Step 1
Step 1
XT5000 or XT4000 Series Codec Unit XT7000 Series Codec Unit
Step 2
Step 2
Step 3
Step 3
Avaya HC020 Camera can be use as first or additional camera on XT4300,
XT5000, and XT7100. Please follow the below instructions to connect and
use HC020 Camera.
Insert the USB connector to its socket at rear of the camera.
Connect the HC020 Camera to your laptop.
Attach the USB connector to the USB upper socket at the rear of the XT Series endpoint (XT4300, XT5000 or XT7100).
Launch the Equinox client and select the device (Avaya HC020) from the Settings > User Preferences page of your
Equinox Client.
If using HC020 as first camera, you should enable it as Default Camera in: Configure > Advanced > I/O connections
> Cameras > General > Default Camera: USB
- Please remove the SMALL plastic lens cover before using the camera
- The video signal is captured from the USB port of the XT unit. As alternative, the HDMI port can be used, connecting the
HDMI of the camera to the XT unit (HDMI cable not included in the box). USB port is also used for camera control.
Under this configuration, HC020 camera can be controlled using the provided remote control.
© 2019 Avaya Inc. All Rights Reserved.
Avaya and the Avaya logo are trademarks
of Avaya Inc. and are registered in the
United States and other countries. All other
trademarks identified by ®, TM, or SM are
registered marks, trademarks, and service
marks, respectively, of Avaya Inc. 02/19 •
700514525_QSG_HC020_Camera
Help
connect the USB
cable to USB2
(upper USB
connector)
connect the USB
cable to USB2
(upper USB
connector)