Avaya XT Flex User manual

Quick Setup Guide
avaya.com
Avaya XT Flex Camera
Congratulations on purchasing your PTZ Flex
Camera for the Avaya IX Video Conferencing XT
Series. This brings a full HD video source to your
endpoint, with HD 1080p at 60 frames per second
(fps), including 5x Optical Zoom, optional 8x Digital
zoom (total 40x), 80° Horizontal Field of View.
Package Content:
• Avaya XT Flex Camera
• First Camera Cable: 2.5m triple camera cable,
including power, VISCA and DVI-D/HDMI

Setting Up this Device
Connect the cables as detailed in the steps below to
complete the setup of the Avaya XT Flex Camera. For
details on how to use the system after setup, see the
User Guide for Avaya IX Video Conferencing XT Series.
The Avaya XT Flex Camera is suitable for all XT Series
(XT4000 Series, XT5000 Series, XT7000 Series, and XT
Executive 240). VISCA out is not available, but can be
used as last element of a VISCA cascading chain.
Connecting the XT Flex Camera to the XT
Use the cable supplied to connect the Flex Camera to the
XT Series endpoint. Attach the three connectors to the
camera, and use the other end to attach to the codec.
Step 1.
Insert the three connectors to their sockets at the rear of
the camera:
• The DVI connector to the DVI socket.
• The 8-pin connector to the Ctrl Camera IN socket.
• The power connector to the DC IN 12V socket.
Step 2.
Attach the two connectors to the camera sockets at
the rear of the XT endpoint:
• The HDMI connector to the vertical socket
• The connector for power and serial control to the
horizontal socket.
Step 3.
Ensure that the camera input is enabled in the menu
Configure > Advanced > I/Oconnections > Cameras. See
the User Guide on the Avaya Support Site for details.
DC IN 12V IN RS-232C OUT DVI
IR SELECT
1 2 3
SYSTEM
SELECT
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
DC IN 12V IN RS-232C OUT DVI
IR SELECT
1 2 3
SYSTEM
SELECT
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
NOTE: At the bottom of the camera, there is a dip switch
with four pins. Depending on the hardware release of the
camera and on the pin 1 and 2 settings, the camera can
be controlled by the XT Remote control as described in
the following tables. The pin 1 and 2 settings to control
the camera are for hardware release V03 and V02 only.
Default Flex Dip Switch Matrix
FLEX V00 FLEX V01 FLEX V02 FLEX V03
DIP SWITCH 1 OFF OFF ON ON
DIP SWITCH 2 OFF OFF ON ON
DIP SWITCH 3 OFF OFF OFF OFF
DIP SWITCH 4 OFF OFF OFF OFF
DIP Switch (DIP1~2)
No. DIP 1 DIP 2 Avaya XT Remote Control IR Code
1 OFF OFF 97
2 ON OFF 98
3 OFF ON 99
4 ON ON Debug
NOTE: The hardware release of the camera is visible on
a sticker at the bottom of the camera next to dip switch.
The possible values are:
- V03, - V02, - V01. If not specified it is V00.
About Avaya
Businesses are built on the experiences they provide
and every day millions of those experiences are built
by Avaya (NYSE:AVYA). For over one hundred years,
we’ve enabled organizations around the globe to win—
by creating intelligent communications experiences
for customers and employees. Avaya builds open,
converged and innovative solutions to enhance and
simplify communications and collaboration—in the cloud,
on premise, or a hybrid of both. To grow your business,
we’re committed to innovation, partnership, and a
relentless focus on what’s next. We’re the technology
company you trust to help you deliver Experiences that
Matter. Visit us at www.avaya.com.
P/N 700512612 B01
© 2020 Avaya Inc. All Rights Reserved. Avaya and the Avaya logo are trademarks of Avaya Inc. and are
registered in the United States and other countries. All other trademarks identified by ®, TM, or SM are
registered marks, trademarks, and service marks, respectively, of Avaya Inc. 04/20 • 700512612 Avaya XT
Flex Camera - Quick Setup Guide
CAUTION:
Make sure all units are switched off whenever
connecting or disconnecting devices.