Avdel 7287 Operating instructions

6
The hydro-pneumatic 07287 tool is designed to place Avdel®lockbolt and breakstem fasteners at high speed making it ideal for batch or
flow-line assembly in a wide variety of applications throughout all industries.
The 07287 is of the remote intensifier or split tool concept consisting of; Pistol Grip head, Air Oil Intensifiers and Steel Enclosure
(see pages 5, 16, 18, 20 and 21).
Pistol Grip type head fitted with a pintail deflector is the standard tool for which a stem catching option and a side ejection accessory
are available (see details page 10). It is also possible to order the base tool only (part number 07287-00200) which will not be
fitted with a nose assembly.
07287 TOOL SELECTION
FASTENER
MATERIAL/DETAILØ
COMPLETE
TOOL PART Nº
NOSE ASSY
PART Nº
NAME & HEAD
-
-
-
-
-
-
-
Steel
-
Straight with Vertical Flats
Straight with Vertical Flats
Straight with Horizontal Flats
Straight with Horizontal Flats
Straight with Horizontal Flats
Straight with Horizontal Flats (Stepped)
Straight with Horizontal Flats (Stepped)
Straight Round
Straight Round
Straight Round (Stepped)
MAXLOK®
HEMLOK®
AVTAINER®
MONOBOLT®
AVEX®
AVINOX®II
AVDELOK®
3/16
" (4.8mm)
1/4
" (6.4 mm)
1/4
" (6.4mm)
3/8
" (10 mm)
3/16
" (4.8 mm)
1/4
" (6.4 mm)
3/8
" (10 mm)
3/16
" (4.8 mm)
3/16
" (4.8 mm)
3/16
" (4.8 mm)
3/16
" (4.8 mm)
1/4
" (6.4 mm)
1/4
" (6.4 mm)
1/4
" (6.4 mm)
1/4
" (6.4 mm)
5/16
" (8.0 mm)
5/16
" (8.0 mm)
3/8
" (10 mm)
3/8
" (10 mm)
07287-00001
07287-00002
07287-00004
07287-00006
07287-00012
07287-00014
07287-00018
07287-00030
07287-00036
07287-00050
07287-00051
07287-00052
07287-00053
07287-00054
07287-00055
07287-00056
07287-00057
07287-00058
07287-00059
07610-02000
07610-02100
07612-02000
07498-00800
07498-04700
07498-04600
07220-07200
07490-04900
07498-01300
07200-02500
07200-02700
07200-02600
07200-02800
07200-03300
07200-03500
07220-02700
07220-03400
07220-02000
07220-03500
-
-
Standard
Standard
Standard
Standard
Standard
Standard
Standard
-
-
-
-
-
-
-
-
-
-
NOSE TIP
TYPE
07267-00900
07267-00900
07267-00800
07267-00800
07267-00800
07267-00800
07267-00800
-
1/4
" (6.4 mm)
07287-00016
07498-00500
Standard
07267-00800
07267-00800
07267-00800
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
07220-02500
ADAPTOR
Intent of Use
Tool Selection

8
Nose Assemblies
IMPORTANT
The air supply must be disconnected when fitting or removing nose assemblies unless specifically instructed
otherwise.
•Lightly coat the jaws with Molylithium grease.
•Drop Jaws 5into Jaw Housing 4or Chuck Collet 3, depending on whether you have a short or long nose assembly (see table
opposite for identification).
•Insert Jaw Spreader 7into Jaw Housing 4(locating in the ‘V’ shape formed by the jaws) or insert front Spring Guide 6into Chuck
Collet 3.
•Locate Buffer 8on Jaw Spreader 7.
•Locate Spring 9onto Jaw Spreader 7or onto Front Spring Guide 6.
•On long nose assemblies, screw Rear Spring Guide 10 into Chuck Collet 3.
•Fit Locking Ring 11 onto the end plug of the tool.
•Holding tool pointing down, screw on the assembled jaw housing or chuck collet onto the end plug and tighten with spanner.
•Screw Nose Tip 1into Nose Casing 2.
•Place Nose Casing 2over Jaw Housing 4or Chuck Collet 3and screw onto tool, tightening with spanner.
Fitting Instructions
12 3 5 10 116 9
1 2 4 9115 87
07287 Nose Assembly Components
This table lists nose assemblies. Each nose assembly represents a unique assembly of components which can be ordered individually.
Component numbers refer to the illustration above. We recommend some stock as items will need regular replacement. Read the
Nose Assemblies Servicing Instructions opposite carefully. All nose assemblies also include a locking ring part number
07340-00327.
It is essential that the correct nose assembly is fitted prior to operating the tool. By knowing your original complete tool part number
or the details of the fastener to be placed, you will be able to order a new complete nose assembly using the selection tables on
pages 8 and 9.
NOSE ASSY 1 2 4 5789
NOSE ASSY 1 2 3 56910
07498-00500 07497-03202 07498-00501 07498-00502 07497-03002* 07498-00507 07500-02005 07498-00503
07490-04900 07490-04400 07340-00306 07340-00304 07340-07502 07340-07503 07340-01503 07340-01502
07498-01300 07498-01400 07340-00306 07340-00304 07340-07502 07340-07503 07340-01503 07340-01502
07498-04600 07498-03202 07340-00306 07340-00304 07498-04501* 07498-04502 07498-03003 07100-04003
07498-04700 07498-03001 07340-00306 07498-04503 07498-04501* 07498-04900 07498-03003 07100-04003

9
Servicing Instructions
Selection Tables for Monobolt®, Avdelok®, Avtainer®, Maxlok®and Hemlok®
Nose Assemblies
AVDELOK®
07200-02500 07200-02501 07200-02101 07220-02102 07220-02104 07220-02103 --
07200-02600 07200-02601 07200-02201 07220-02302 07220-02104 07220-02103 --
07200-02700 07200-02701 07200-02101 07220-02102 07220-02104 07220-02103 --
07200-02800 07200-02801 07200-02201 07220-02302 07220-02104 07220-02103 --
07200-03300 07200-03301 07200-03302 07220-02302 07220-02104 07220-02103 --
07200-03500 07200-03501 07200-02201 07220-02302 07220-02104 07220-02103 --
07220-02000 07220-02001 07200-02002 07220-02003 07220-02603 07220-02605 --
07220-02700 07200-02601 07220-02701 07220-02606 07220-02603 07220-02605 --
07220-03400 07220-03401 07220-03402 07220-02606 07220-02603 07220-02605 07220-02604
07220-03500 07220-03501 07220-03502 07220-02003 07220-02603 07220-02605 --
12345 6
DESCRIPTION ANVIL CHUCK CHUCK SPRING SPRING SPACER
COLLET JAWS GUIDE
NOSE ASSY
1
2
3
4
5
6
7
8
1
1
1
1 SET
1
1
1
1
07498-00802
07498-00501
07498-00801
07220-02302
07498-00803
07500-02005
07498-00503
07340-00327
NOSE TIP
NOSE CASING
CHUCK COLLET
JAWS
SPRING GUIDE
SPRING
THREADED SPRING GUIDE
LOCKING RING
1
2
3
4
5
6
7
8
1
1
1 SET
1
1
1
1
1
07612-02001
07612-02003
07612-02002
07612-04502
07498-03003
07340-00327
07007-00458
07340-00306
NOSE TIP
JAW HOUSING
JAWS
JAW SPREADER
BUFFER
LOCKING RING
SPRING
NOSE CASING
1
2
3
4
5
6
1
1
1 SET
1
1
1
07610-02001
07610-02002
07610-02003
07220-02103
07220-02104
07610-02004
07610-02101
07610-02102
07610-02103
07220-02103
07220-02104
07610-020041
ANVIL
CHUCK COLLET
CHUCK JAWS
SPRING
SPRING GUIDE
FRICTION RING
12 34 5 6 7 8
1 2345 678
123 4 5 6ITEM DESCRIPTION
07610-02000
PART Nº
07610-02100
PART Nº QTY
ITEM DESCRIPTION PART Nº QTY
ITEM DESCRIPTION PART Nº QTY
MAXLOK®07610-02000 & 07610-02100
HEMLOK®07612-02000
1
2
3
4
5
6
7
8
1
1
1
1 SET
1
1
1
1
07220-07101
07220-06304
07220-07202
73411-05001
07220-06302
07220-06305
07220-06301
07220-02108
NOSE TIP
JAW HOUSING
NOSE CASING
JAWS
JAW SPREADER
SPRING
SPRING GUIDE
DUST COVER
ITEM DESCRIPTION PART Nº QTY
MONOBOLT®07220-07200
AVTAINER®07498-00800
Anvils are stamped "3/16M" or "1/4M" to aid identification
123456
123456 7 8
Nose assemblies should be serviced at weekly intervals.
•Remove the complete nose assembly using the reverse procedure to the ‘Fitting instructions’.
•Any worn or damaged part should be replaced by a new part.
•Particularly check wear on jaws.
•Ensure Jaw Spreader 7 assembly tube (where fitted) or Front Spring Guide 6is not distorted.
•Check Spring 9is not distorted.
•Assemble according to fitting instructions.
Item numbers in bold refer to the Nose Assembly drawing on page 8.