Avermedia AVerVision 300AF User manual

A
VerVision
300AF
Quick Guide
1. Connect the Power.
VGAOUTVGAINDC12VLIGHT
BOX
Power adapter
Power cord
Wall outlet
2. Select the video display output.
TV RGB
VIDEO S-VIDEO DVI
TV RGB
VIDEO S-VIDEO DVI
Switch AVerVision Port Device
a. RGB
VGA OUT
LCD/DLP projector
b. TV
S-VIDEO
Television
a. RGB Connection
VGAOUTVGAINDC12VLIGHT
BOX
LCD/DLP projector
RGB cable
(VGA Cable)
b. TV Connection
TV RGB
VIDEO S-VIDEO DVI
TV RGB
VIDEO S-VIDEO DVI
S-Video cable
S-Video to SCART cable
S-VIDEO
SCART
INPUT
Television
3. Connect a desktop or portable computer (discretional).
- Make sure to connect the other end of the RGB cable to
the VGA(RGB) output port of the computer.
- Press button to display image from VGA IN port of
AVerVision 300AF.
- For portable computer, make sure to switch your
computer to send signal to external output. Usually the
keyboard command is Fn+F5. If not, please check with
your computer handbook or contact the technical support
of your computer manufacturer.
VGAOUTVGAINDC12VLIGHT
BOX
RGB Cable
Desktop Computer
Portable Computer
4. Basis Operation
zPress the zoom
and to
zoom in and zoom
out the image.
zPress to
adjust the focus
automatically.
zPress to
capture and save
the image in the
built-in memory.

A
VerVision
300AF
Quick Guide zPress to
display the image
in BW, Negative or
Color in Camera
and Playback mode
only.
zPress to
pause or resume
the live image in
camera mode.
zPress to
switch to Camera
mode.
The image from the
built-in camera will
be displayed.
zPress to
switch to PC mode.
The image coming
from the VGA IN
port will be
displayed.
zPress to
switch to Playback
mode.
The captured
image stored in the
built-in memory
will be displayed.
zUse the up,
down, left, and
right to
navigate the
picture in Playback
mode and OSD
menu selection.
zPress right to
enter or make a
selection.
zPress to call
up the menu OSD.
For more details,
please refer to user
manual that comes
with AVerVision