Avermedia AVerVision300i User manual

A
AV Ve er rM Me ed di ia a®
®
A AV Ve er rV Vi is si io on n3 30 00 0i i
User Manual
AVerMedia®
Document Camera

FCC NOTICE
This device has been tested and found to comply with the limits for a digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a commercial, industrial or business environment. This equipment can
generate, use and radiate radio frequency energy and, if not installed and used in accordance
with the instruction, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CAUTION ON MODIFICATIONS
To comply with the limits for the digital device, pursuant to Part 15 of the FCC Rules, this device
must be installed in computer equipment certified to comply with the limits. All cables used to
connect the computer and peripherals must be shielded and grounded. Operation with
non-certified computers or non-shielded cables may result in interference to radio or television
reception.
Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
CE NOTICE
This is a product, complied with the CE limits.
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the contents
of this documentation, its quality, performance, merchantability, or fitness for a particular
purpose. Information presented in this documentation has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information contained in this
documentation is subject to change without notice.

In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use this product or documentation, even if advised
of the possibility of such damages.
TRADEMARKS
AVerMedia and AVerVision300i are registered trademarks of AVerMedia TECHNOLOGIES, Inc.
IBM PC is a registered trademark of International Business Machines Corporation. Macintosh is
a registered trademark of Apple Computer, Inc. Microsoft is a registered trademark and
Windows is a trademark of Microsoft Corporation. All other products or corporate names
mentioned in this documentation are for identification and explanation purposes only, and may
be trademarks or registered trademarks of their respective owners.
COPYRIGHT
©2005 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without the written permission of AVerMedia
TECHNOLOGIES, Inc.

i
T
Ta ab bl le e o of f C Co on nt te en nt ts s
Introduction..................................................................... 1
Package Contents ......................................................... 2
Optional Accessories ...................................................................... 3
Technical Specifications ................................................ 4
Installing and Setting the Hardware.............................. 5
Connecting the Power Adapter ....................................................... 6
Connecting a VGA, Mac Display Monitor or LCD/DLP Projector.... 6
Connecting a TV ............................................................................. 7
Connecting an IBM Compatible PC or Macintosh Computer.......... 7
Connecting a Computer via USB Connection................................. 8
Installing the Optional Light Box ..................................................... 8
Connecting a Microscope................................................................ 9
Adjusting the AVerVision300i........................................ 10
Camera Head.................................................................................. 10
Mechanical Arm .............................................................................. 10
Light and Document Positioning Pointer......................................... 11
Anti-glare......................................................................................... 11
Using the Infrared Remote Control ............................... 12
Touch Button Control Panel .......................................... 14
LED Panel ...................................................................... 15

ii
Infrared Sensor ............................................................. 16
Timer Function................................................................ 16
Using the AVerVision Application................................. 18
Installing the Software..................................................................... 18
Application User Interface ............................................................... 19
Image Download from AVerVision300i to PC.............. 22
OSD Navigation Tree .................................................... 23
Menu Functions ............................................................ 24
Troubleshooting ............................................................ 27
Limited Warranty ........................................................... 29

1
I
In nt tr ro od du uc ct ti io on n
Thank you for purchasing the AVerMedia®AVerVision300i. This document
camera displays any documents, negatives, transparencies and 3D objects onto
a TV, LCD or DLP projector making presentations a snap.
The advanced features of the AVerVision300i make it a versatile and
multifunctional product, making presentations easy. You can save still images
with built-in flash memory and download to a PC. While connected to a PC via
USB cable, you can also capture and save images and video clips to your PC.
It also comes equipped with a full-featured remote control. AVerVision300i is an
ideal presentation tool for academic, business, medical and the scientific
community.

2
P
Pa ac ck ka ag ge e C Co on nt te en nt ts s
User Manual
Remote Control
(batteries included)
AVerMedia® AVerVision300i
Driver CD
Anti-glare Sheet
Power Adapter
RCA Cable
S-Video Cable
Computer Extension Cable
(VGA Cable)
Power Cord
* The power cord will vary depending on the
standard power outlet of the country where it is
sold.
USB Cable

3
O
Op pt ti io on na al l A Ac cc ce es ss so or ri ie es s
34mm Coupler 28mm Coupler
Light Box
Monitor Adapter
(for MAC)
Computer Adapter
(for MAC)

4
T
Te ec ch hn ni ic ca al l S Sp pe ec ci if fi ic ca at ti io on ns s
Image
Sensor 1/3” progress scan CCD
Effective Pixels 790K 1024 (H) x 768 (V)
Frame Rate 15 fps
White Balance Auto / Manual
Exposure Auto / Manual / Flicker / Night View
Image mode Text / Graphics
Effect Color / B/W / Negative; Reverse; Mirror
Analog RGB output XGA：75 Hz, SVGA：60 Hz, VGA：60 Hz
H Sync. Signal 60K / 47 KHz, TTL level, Positive Polarity
V Sync. Signal 75Hz, TTL level, Positive Polarity
Image Signal Level 0.77 Vpp
S-Video, Composite Video Output NTSC / PAL
Image Capture Up to 80 Frames
Built-in Memory 32MB NAND Flash Memory
Optics
Lens F1.8; Manual Focusing
Shooting Area 320mm x 240mm (max.);
Zooming Digital: 8x
Power Source 100-220V ~ 1.8A, 50-60 Hz
Consumption 15 Watts (lamp off); 30Watts (Lamp on)
Lighting
Lamp type LED lamp with Laser Positioning Pointer
Input/Output
VGA Input 15-Pins D-sub (VGA)
VGA Output 15-Pins D-sub (VGA)
DVI DVI-D Type (DVI-VGA adapter not supported)
S-Video Mini-DIN Jack
Composite Video RCA Jack
USB USB1.1
DC 6V Output Power Jack
Dimension
Operating 220mm x 140mm x 500mm
Folded 380mm x 170mm x 55mm
Weight 2 kg (about 4.4 lb)

5
I
In ns st ta al ll li in ng g a an nd d S Se et tt ti in ng g U Up p t th he e H Ha ar rd dw wa ar re e
The ports on the back and side panel of the AVerVision300i enable you to connect the unit
to a computer, graphics display monitor or LCD/ DLP projector, TV or other devices.
Illustrated below are the ports that are located at the back and side panel of the
AVerVision300i with their corresponding labels.
Port Description
1.Security Slot Use this port to connect a Kensington compatible security lock.
2. DC 12V (input) Plug the power adapter into this port. (If turn off the AVerVision300i by
disconnecting the power cord, please wait for 5 seconds to reconnect the
power connector.)
3. DC 6V (output) Plug the optional light box into this port.
4. PC IN Port Use this port to connect the AVerVision300i to the VGA output port of your
computer. This enables you to input your computer video signal and pass it
through to the VGA out port.
5. VGA OUT Port Use this port to connect to a VGA/ Mac monitor, LCD/DLP projector for your
camera, PC presentation, or playback a picture from built-in memory.
6. VIDEO Port The VIDEO Port enables you to output your camera or preview a picture
from the built-in memory, on your TV.
7. S-VIDEO Port The S-VIDEO Port enables you to output your camera or preview a picture
from the built-in memory, on your TV.
8. DVI OUT Port Use this port to connect to a LCD/DLP projector or monitor with DVI
interface for your camera, PC presentation or play back a picture from
built-in memory. (To use DVI connections, please turn on the document
camera first before plugging the DVI cable.)
9. USB1.1 Port This port enables you to use AVerVision300i as a PC Camera or to
download the captured images to your PC.

6
C
Co on nn ne ec ct ti in ng g t th he e P Po ow we er r A Ad da ap pt te er r
You can connect the power adapter to a standard 100V~240V AC power source.
C
Co on nn ne ec ct ti in ng g a a V VG GA A, , M Ma ac c D Di is sp pl la ay y M Mo on ni it to or r o or r L LC CD D/ /D DL LP P
P
Pr ro oj je ec ct to or r
AVerVision300i enables you to display a presentation on a VGA / MAC display monitor, or
LCD/DLP projector. It also comes with a DVI output port that produces maximum video
quality from your LCD/DLP projector or monitor.

7
C
Co on nn ne ec ct ti in ng g a a T TV V
To display a presentation on TV, connect AVerVision300i to your TV by using the Video
Cable or S-Video cable, switch the output mode to TV system by pressing the VGA / TV
button on the remote control or control panel. If you are using a SCART RGB monitor,
connect it by using the RCA to SCART cable. (The SCART RGB cable is provided as an
optional accessory cable with the AVerVision300i.)
C
Co on nn ne ec ct ti in ng g a an n I IB BM M C Co om mp pa at ti ib bl le e P PC C o or r M Ma ac ci in nt to os sh h
C
Co om mp pu ut te er r
You can connect the AVerVision300i to an IBM compatible PC, Macintosh, or notebook
(laptop) computer. After physically connecting the unit to your PC, you can display an
image from your computer by pressing the PC button on the unit’s control panel or remote
control.

8
C
Co on nn ne ec ct ti in ng g a a C Co om mp pu ut te er r v vi ia a U US SB B c co on nn ne ec ct ti io on n
Download the saved images from AVerVision300i’s built-in memory to your computer or
access the software application as a PC cam via the USB cable. Select the function
through OSD, then connect it. (Refer to the section, Using the AVerVision Application, for
more details.)
I
In ns st ta al ll li in ng g t th he e O Op pt ti io on na al l L Li ig gh ht t B Bo ox x
Connecting an optional light box enables you to view x-rays, transparencies and negative
slides.

9
C
Co on nn ne ec ct ti in ng g t to o a a M Mi ic cr ro os sc co op pe e
Connecting the AVerVision300i to a microscope enables you to examine microscopic
objects on a larger screen without straining your eyes.

10
A
Ad dj ju us st ti in ng g t th he e A AV Ve er rV Vi is si io on n3 30 00 0i i
This section provides illustrated useful tips on how to adjust the AVerVision300ito meet
your needs.
C
Ca am me er ra a H He ea ad d
The camera head can be rotated 135 degrees from left to right. You can also manually
adjust the focus from here to improve the quality of the pictures.
Adjust the angle here
at the ridged side
Adjust the
focus here
45 degrees
90 degrees
Camera Head
M
Me ec ch ha an ni ic ca al l A Ar rm m
AVerVision300i features a mechanical arm that enables you to project an image to its full
height for full A4 paper landscape viewing.
75 degrees
92 degrees
60 degrees
120 degrees
Extendable up to
122mm (4.8 in) long

11
L
Li ig gh ht t a an nd d D Do oc cu um me en nt t P Po os si it ti io on ni in ng g P Po oi in nt te er r
A unique feature of the AVerVision300i is the four (4) laser positioning pointers that define
the viewing area, enabling you to correctly position the object at the center under the
camera’s viewing area. 3 various light and laser position pointer settings are provided as
follows.
A
An nt ti i- -g gl la ar re e
The anti-glare sheet is a special coated film that helps eliminate any glare you may
encounter when you are displaying very shiny objects or glossy surfaces such as
magazines, pictures, etc. Simply place the anti-glare sheet on top of the document to
reduce the reflected light.

12
U
Us si in ng g t th he e I In nf fr ra ar re ed d R Re em mo ot te e C Co on nt tr ro ol l
Use the AVerVision300i Remote Control to enhance your presentation, switch between (3)
three presentation modes and access various features. To use the remote control, first
insert the batteries (2 size “AAA” batteries are provided) into the battery compartment at
the back of the remote. Use the figure and descriptions below to help you use the remote
control.
Function Description
1
POWER Turns the unit on/off.
2
CAMERA MODE
Switches to Camera mode and displays the image from the
AVerVision300i’s built-in digital video camera.

13
3
PC MODE
Switches to PC mode and displays the video signal from the PC IN
port.
4
PLAYBACK MOD
E
Switches to PLAYBACK mode and displays 16-thumbnail images
captured in AVerVision300i’s built-in memory.
5
EFFECTS
In Camera or Playback mode, press to convert and view the video in
Black and White, Negative or Color.
6
MIRROR
In Camera or Playback mode, press to flip the image picked up by the
camera.
7
TIMER
Press TIMER button to display, start and hide the on-screen display
timer. You can toggle to display or hide the remaining time when the
timer countdown has started.
8
Reverse In Camera or Playback mode, press to rotate the image by 180°.
9
NIGHT VIEW
Press to turn on/off Night View.
Use Night View when you are presenting in a low-light condition. In
Night View, the image of the object appears as though under normal
lighting conditions. The AVerVision300i automatically adjusts the
exposure to compensate for the adverse condition. The captured
image however, appears in slow motion.
10
VGA/TV
Switches between VGA (VGA Out/DVI Out) or TV (Composite
Video/S-Video Out).
11
FREEZE
Press this button to hold the image picked up by the camera and to
release the image that has been retained.
12
ZOOM +/ -
Press “+” or “–“ to digitally zoom in and zoom out the picture up to
800%.
13
ZOOM RESET Press to return to normal view (1x).
14 & 15
◄▲►▼
/ MENU
- Press MENU to display the OSD menu and then use the ▲, ►, ▼
and ◄around the menu button to make a selection and adjustment.
- In playback mode, use the ▲, ►, ▼and ◄to make a selection and
then press PLAYBACK to display the image in full size. You may
also use PLAYBACK button to revert back to display 16-thumbnail
pictures.
- In zoom-in mode, use the ▲, ►, ▼and ◄to pan up , down , left and
right.
16
CAPTURE
In Camera mode, press to photograph an image. The captured image
is automatically stored in the built-in memory card in 1024 x 768
resolution.
17
DELETE
Permanently removes the selected picture in preview mode or the
displayed full-sized picture.

14
T
To ou uc ch h B Bu ut tt to on n C Co on nt tr ro ol l P Pa an ne el l
The touch button control panel located on the top side of the
AVerVision300i provides quick access to commonly used functions.
Function Description
1
CAMERA MODE
Switches to Camera mode and displays the image from the
AVerVision300i’s built-in digital video camera.
2
PC MODE
Switches to PC mode and displays the video signal coming from the
PC IN port.
3
PLAYBACK
MODE
Switches to PLAYBACK mode and displays 16-thumbnail images
captured in AVerVision300i’s built-in memory.
4
VGA/TV
Switches between VGA (VGA Out/DVI Out) or TV (Composite
Video/S-Video) output.
5
AWB/
MEASURE
Switches between the continuous Auto White Balance (AWB) or
measure and adjust it one time just after pressing the button under
Camera mode.
6
NIGHT VIEW
Press to turn on / off Night View feature.
Use Night View mode when you are presenting under low-light
condition. When Night View mode is enabled, the projected image
will brighten up and appear like under normal lighting
condition. However, you will notice the slow motion under live video
streaming.