Avery Dennison TrafficJet User manual

Avery DennisonⓇ
TrafficJet™ Front Panel functions
Instructional Bulletin : # 9.11
Revision : # 04
Last Updated : December 2019

Contents
1. Power Indicator
2. Head Height Indicator
3. Menu Button
4. Cancel / Pause Button
5. Arrow Buttons
6. Enter / Cut Sheet Button
7. Cleaning Mode Indicator
8. Error Indicator
9. Online Menu









































Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 1 of 13
reflectives.averydennison.com


1. Power Indicator
Button is Blue when the printer is ON and in Standby Mode. The button blinks when receiving data from
the RIP software.






















Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 2 of 13
reflectives.averydennison.com


2. Head Height Indicator

Important!
●Mid Position is the correct position for the TrafficJet when printing on Reflective Sheeting.
●Some older TrafficJet models might refuse to switch OFF if the head height is in Mid position.
Switching the orange lever to LOW position when turning OFF the printer fixes this issue.























Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 3 of 13
reflectives.averydennison.com


Indicator Head Height Low Position




Indicator Head Height Mid Position (correct position for Reflective Sheeting)




Indicator Head Height High Position






















Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 4 of 13
reflectives.averydennison.com


3. Menu Button





Enter the Menu Panel Menu. See table on the next page for the 7 menu sections.























Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 5 of 13
reflectives.averydennison.com

Menu 1:
Setup >
Setup Table is not part of this Instructional Bulletin
Menu 2:
Test Print >
Test 1:
Nozzle Check


Test 2:
Mode Print


Test 3:
Setup List


Test 4:
Palette (not for xx38)


Test 5:
Colour Verify
Menu 3:
Cleaning >
Time:
Short



Normal



Long



Little Charge



Initial Charge
Menu 4:
Menu Option >
1 [*] Hide / Show Menu Entries of the Setup List
Menu 5:
Version >
Ver. M / C : 3.02 / 1.20
Menu 6:
Sleep Mode >
Sleep Mode 1
Set Timer


Sleep Mode 2
Start
Menu 7:
Display >
Display 1:
Language


Display 2:
Temperature


Display 3:
Length
Menu 8:
Jobstatus >
Info about the last job






















Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 6 of 13
reflectives.averydennison.com

4. Cancel / Pause Button
Double function: Cancel or pause the current print job.






























Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 7 of 13
reflectives.averydennison.com

5. Arrow Buttons

Left Arrow Button
Double function. Either navigate through the menu or when printer is in Standby status, click and hold for 2
seconds to print a Nozzle Check.

Down Arrow Button
Feed sheeting forward.

Right Arrow Button
Triple function: Either navigate through the menu, click and hold for 2 seconds to perform a Manual
Cleaning Cycle (works also during actual printing), in Standby mode push short to change the Manual
Cleaning Cycle. For more information, visit our website and check Manual Cleaning Cycle IB# 9.9.

Up Arrow Button
Feed sheeting backward.






Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 8 of 13
reflectives.averydennison.com

6. Enter / Cut Sheet Button
Triple function. Press to confirm option when navigating through the Menu, click to resume printing when
printer is in Pause Mode and click and hold for 2 seconds when printer is in Standby Mode to cut off
sheeting.

Important!
ONLY use the automatic cutter to cut T-1500D or Avery Dennison Graphics media. DO NOT use for any
other (Prismatic) Reflective sheeting series!






















Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 9 of 13
reflectives.averydennison.com


7. Cleaning Mode Indicator





























Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 10 of 13
reflectives.averydennison.com

Short Cleaning Cycle Indicator




Normal Cleaning Cycle Indicator




Long Cleaning Cycle Indicator






Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 11 of 13
reflectives.averydennison.com

8. Error Indicator
When serious errors occur, the LED will blink orange and errors are reported on the display. Examples are
Ink Low, Ink End or No Cartridge message.

Ink Low
[125] Ink Low means the cartridges or bags in slot positions 1, 2 and 5 are empty and you should
immediately replace the ink.

Ink End
[348] Ink End means the cartridges or bags in positions 3, 4 and 8 are empty and the printer is running on
the sub tanks.

No Cartridge
[26] NoCartridge means no cartridges or bags are inserted or recognized in slot positions 2 and 6 by the
printer.






Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 12 of 13
reflectives.averydennison.com

9. Online Menu
Press Menu Button during printing


1
Temperature
Only to check temperature
2
Pre Heater
Change Pre Heater
3
Platen Heater
Change Platen Heater
4
Dryer
Change Dryer
5
PF Micro Adj.
Change step setting
6
Backup
Save Parameter
7
Job Status
Info about remaining job


























The above Avery Dennison literature provides information to the user for proper application, storage and other requirements. Please refer to Product Data
Bulletins or your local Avery Dennison Representative for warranty information. Find the latest information on the Avery Dennison website,
www.reflectives.averydennison.com. We encourage you to check our website periodically for updates.

All statements, technical Information and recommendations about Avery Dennison products are based upon tests and information believed to be reliable, but do
not constitute a guarantee or warranty of any kind. All Avery Dennison products are sold with the understanding that Purchaser has independently determined
the suitability of such products for its intended and other purposes.

For technical questions, please contact:

North America: [email protected]
Europe, Middle East & Africa: [email protected]
Asia Pacific: [email protected]
South America: [email protected]

Instructional Bulletin IB# 9.11
TrafficJet™ Front Panel functions
Page 13 of 13
reflectives.averydennison.com