manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Avnet
  6. •
  7. Computer Hardware
  8. •
  9. Avnet UltraZed-EV User manual

Avnet UltraZed-EV User manual

GETTING STARTED:
1. If not previously installed, go to avnet.me/SiLabUsbToUartVCP to
download and install the Silicon Labs CP210x USB-to-UART driver.
2. Plug the UltraZed-EV SOM onto the UltraZed-EV Carrier Card via
JX1/JX2/JX3 connectors.
3. Set the UltraZed-EV SOM SW2 Boot Mode switch (MODE[0:3] = SW2[1:4]) to
OFF, ON, ON, and ON positions (Boot Mode set to QSPI, MODE[3:0] = 0x1).
4. Install a jumper on the Carrier Card JP20 pins 2-3.
5. Connect the micro USB cable to J16 on the Carrier Card and the USB port
of the PC. This will provide USB-UART connection to the board.
6. Connect 12V power supply to J18 on the Carrier Card.
7. Use Device Manager to determine the COM Port. Open a terminal program,
configure it to 115200/8/n/1/n, connect to the COM Port.
8. Slide the Carrier Card power switch (SW7) to the ON position.
9. The out-of-box design will run and you will see the following on the UART
terminal (please allow time for Linux to boot). You should also see the PS
on-board user Red LED flashing.
DisplayPort
Connector (P1)
USB2.0/3.0
Connector (J17)
SATA
Connector (J6)
RJ45
Connector (J8)
JP20 Jumper
microSD Card
(J7)
USB-UART (J16)
USB-JTAG
Module (U14)
Power Switch
(SW7)
12V Connector
(J18)
SFP+ Connectors
(P3 and P4)
Boot Mode
Switch (SW2)
PL DIP Switches
(SW5)
PL PMOD
Headers
LVDS Touch Panel
Connector (P2)
PS User
LED
HDMI OutHDMI IN3G-SDIPMBus
PL User
LEDs
PL Push
Switches
ON
OFF
SW2 Boot Mode
Switch
1 2 3 4
10. Go to avnet.me/UltraZed-EV to download
a detailed Getting Started Guide.
UltraZed-EV Starter Kit
AVNET DESIGN KIT LICENSE AND PRODUCT WARRANTY
THE AVNET DESIGN KIT (“DESIGN KIT” OR “PRODUCT”) AND ANY SUPPORTING DOCUMENTATION (“DOCUMENTATION” OR “PRODUCT DOCUMENTATION”) IS SUBJECT TO THIS LICENSE AGREEMENT (“LICENSE”). USE OF THE PRODUCT OR
DOCUMENTATION SIGNIFIES ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LICENSE. THE TERMS OF THIS LICENSE ARE IN ADDITION TO THE AVNET CUSTOMER TERMS AND CONDITIONS, OF SALE, WHICH CAN BE VIEWED AT
www.avnet.com. AND ARE INCORPORATED INTO AND FORM PART OF THIS LICENSE AS IF SET FORTH AT LENGTH HEREIN. THE TERMS OF THIS LICENSE WILL CONTROL IN THE EVENT OF A CONFLICT.
1. Limited License. Avnet grants you, (“Buyer”) a limited, non-exclusive, non-transferable, license to: (a) use the Product for your own internal testing, evaluation and design efforts at a single Buyer site; (c) make, use and sell the Product in a single
production unit. No other rights are granted and Avnet and any other Product licensor reserves all rights not specifically granted in this License. Except as expressly permitted in this License, neither the Design Kit, Documentation, nor any portion
may be reverse engineered, disassembled, decompiled, sold, donated, shared, leased, assigned, sublicensed or otherwise transferred by Buyer. The term of this License is in effect until terminated. Buyer may terminate this license at any time by
destroying the Product and all copies of the Product Documentation.
2. Changes. Avnet may make changes to the Product or Product Documentation at any time without notice. Avnet makes no commitment to update or upgrade the Product or Product Documentation and Avnet reserves the right to discontinue the
Product or Product Documentation at any time without notice.
3. Product Documentation. Product Documentation is provided by Avnet on an “AS-IS” basis and does not form a part of the properties of the Product. All Product Documentation is subject to change without notice. Avnet makes no representation
as to the accuracy or completeness of the Product Documentation, and DISCLAIMS ALL REPRESENTATIONS, WARRANTIES AND LIABILITIES UNDER ANY THEORY WITH RESPECT TO PRODUCT INFORMATION.
4. Limited Product Warranty. AVNET WARRANTS THAT, AT THE TIME OF DELIVERY, THE PRODUCT WILL MEET THE SPECIFICATIONS STATED IN PRODUCT DOCUMENTATION FOR SIXTY (60) DAYS FROM DELIVERY OF PRODUCT. IF BUYER CAN PROVIDE
PROOF THAT THE QUALIFIED AVNET PRODUCT WAS PURCHASED TO BE DEPLOYED AS A COMPONENT IN THE BUYER’S COMMERCIALLY AVAILABLE PRODUCT, THE WARRANTY WILL BE EXTENDED TO TWELVE (12) MONTHS FROM THE DATE OF
PURCHASE. TO THE EXTENT PERMITTED BY LAW, AVNET MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, SUCH AS WARRANTY OF MERCHANTABILITY, FITNESS FOR PURPOSE OR NON-INFRINGEMENT. BUYER’S SOLE AND EXCLUSIVE REMEDIES
FOR BREACH OF THIS LIMITED PRODUCT WARRANTY ARE, AT AVNET’S CHOICE: (I) REPAIR OF THE PRODUCT; (ii) REPLACEMENT OF THE PRODUCT AT NO COST TO BUYER; OR (iii) REFUND OF BUYER’S PURCHASE PRICE FOR THE PRODUCT.
5. LIMITATIONS OF LIABILITY. BUYER SHALL NOT BE ENTITLED TO AND AVNET WILL NOT LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE, INCLUDING, WITHOUT LIMITATION, BUSINESS
INTERRUPTION COSTS, LOSS OF PROFIT OR REVENUE, LOSS OF DATA, PROMOTIONAL OR MANUFACTURING EXPENSES, OVERHEAD, COSTS OR EXPENSES ASSOCIATED WITH WARRANTY OR INTELLECTUAL PROPERTY INFRINGEMENT CLAIMS, INJURY
TO REPUTATION OR LOSS OF CUSTOMERS, EVEN IF AVNET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE PRODUCT AND DOCUMENTATION ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN MEDICAL,
MILITARY, AIR CRAFT, SPACE OR LIFE SUPPORT EQUIPMENT NOR IN APPLICATIONS WHERE FAILURE OR MALFUNCTION OF THE PRODUCT CAN REASONABLY BE EXPECTED TO RESULT IN A PERSONAL INJURY, DEATH OR SEVERE PROPERTY OR
ENVIRONMENTAL DAMAGE. INCLUSION OR USE OF PRODUCT IN SUCH EQUIPMENT OR APPLICATIONS, WITHOUT PRIOR AUTHORIZATION IN WRITING OF AVNET, IS NOT PERMITTED AND IS AT BUYER’S OWN RISK. BUYER AGREES TO FULLY INDEMNIFY
AVNET FOR ANY DAMAGES RESULTING FROM SUCH INCLUSION OR USE.
6. LIMITATION OF DAMAGES. BUYER’S RECOVERY FROM AVNET FOR ANY CLAIM SHALL NOT EXCEED BUYER’S PURCHASE PRICE FOR THE PRODUCT GIVING RISE TO SUCH CLAIM IRRESPECTIVE OF THE NATURE OF THE CLAIM, WHETHER IN CONTRACT,
TORT, WARRANTY, OR OTHERWISE.
7. INDEMNIFICATION. AVNET SHALL NOT BE LIABLE FOR AND BUYER SHALL INDEMNIFY, DEFEND AND HOLD AVNET HARMLESS FROM ANY CLAIMS BASED ON AVNET’S COMPLIANCE WITH BUYER’S DESIGNS, SPECIFICATIONS OR INSTRUCTIONS, OR
MODIFICATION OF ANY PRODUCT BY PARTIES OTHER THAN AVNET, OR USE IN COMBINATION WITH OTHER PRODUCTS.
8. California Proposition 65 Notice. This Product contains one or more chemicals known to the State of California to cause cancer, birth defects or other types of reproductive harm.
9. U.S. Government Restricted Rights. The Product and Product Documentation are provided with “RESTRICTED RIGHTS.” If the Product and Product Documentation and related technology or documentation are provided to or made available to
the United States Government, any use, duplication, or disclosure by the United States Government is subject to restrictions applicable to proprietary commercial computer software as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq.,
its successor and other applicable laws and regulations. Use of the Product by the United States Government constitutes acknowledgment of the proprietary rights of Avnet and any third parties. No other governments are authorized to use the
Product without written agreement of Avnet and applicable third parties.
10. Ownership. Licensee acknowledges and agrees that Avnet or Avnet’s licensors are the sole and exclusive owner of all Intellectual Property Rights in the Licensed Materials, and Licensee shall acquire no right, title, or interest in the Licensed
Materials, other than any rights expressly granted in this Agreement.
11. Intellectual Property. All trademarks, service marks, logos, slogans, domain names and trade names (collectively “Marks”) are the properties of their respective owners. Avnet disclaims any proprietary interest in Marks other than its own. Avnet and
AV design logos are registered trademarks and service marks of Avnet, Inc. Avnet’s Marks may be used only with the prior written permission of Avnet, Inc.
12. General. The terms and conditions set forth in the License or at www.avnet.com will apply notwithstanding any conflicting, contrary or additional terms and conditions in any purchase order, sales acknowledgement confirmation or other
document. If there is any conflict, the terms of this License will control. This License may not be assigned by Buyer, by operation of law, merger or otherwise, without the prior written consent of Avnet and any attempted or purported assignment
shall be void. Licensee understands that portions of the Licensed Materials may have been licensed to Avnet from third parties and that such third parties are intended beneficiaries of the provisions of this Agreement. In the event any of the
provisions of this Agreement are for any reason determined to be void or unenforceable, the remaining provisions will remain in full effect. This constitutes the entire agreement between the parties with respect to the use of this Product, and
supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No waiver or modification is effective unless agreed to in writing and signed by authorized representatives of both parties.
The obligations, rights, terms and conditions shall be binding on the parties and their respective successors and assigns. The License is governed by and construed in accordance with the laws of the State of Arizona excluding any law or principle,
which would apply the law of any other jurisdiction. The United Nations Convention for the International Sale of Goods shall not apply.
Copyright © 2019 Avnet, Inc. AVNET, "Reach Further," and the AV logo are registered trademarks of Avnet, Inc. All other brands are the property of their respective owners. LIT# 5342-QSC-ULTRAZED-EV-SOM-V5

Other Avnet Computer Hardware manuals

Avnet i.MX 8M Plus User manual

Avnet

Avnet i.MX 8M Plus User manual

Avnet MaaXBoard8ULP User manual

Avnet

Avnet MaaXBoard8ULP User manual

Avnet NXP RT1176 Installation manual

Avnet

Avnet NXP RT1176 Installation manual

Avnet MSC Technologies ETE-A945GSE User manual

Avnet

Avnet MSC Technologies ETE-A945GSE User manual

Avnet MiniZed Installation manual

Avnet

Avnet MiniZed Installation manual

Avnet AT&T Cellular IoT Kit User manual

Avnet

Avnet AT&T Cellular IoT Kit User manual

Avnet Zynq-7000 AP SoC User manual

Avnet

Avnet Zynq-7000 AP SoC User manual

Popular Computer Hardware manuals by other brands

Noise Lab Fourcaster user guide

Noise Lab

Noise Lab Fourcaster user guide

N.A.T. NAT-MCH Technical reference

N.A.T.

N.A.T. NAT-MCH Technical reference

Rane CP 62 datasheet

Rane

Rane CP 62 datasheet

Cowlacious Designs CAD-200 manual

Cowlacious Designs

Cowlacious Designs CAD-200 manual

NZXT KRAKEN Z Series user manual

NZXT

NZXT KRAKEN Z Series user manual

EMC EM78P451 manual

EMC

EMC EM78P451 manual

Nvidia GeForce3 Ti200 manual

Nvidia

Nvidia GeForce3 Ti200 manual

HP Z400 - Workstation Installation

HP

HP Z400 - Workstation Installation

Symetrix SymNet Series quick start

Symetrix

Symetrix SymNet Series quick start

TRENDnet TE100-PCBUSR - DATA SHEETS Quick installation guide

TRENDnet

TRENDnet TE100-PCBUSR - DATA SHEETS Quick installation guide

Advantech AIMB-786 Startup manual

Advantech

Advantech AIMB-786 Startup manual

Pinnacle PCTV 310E user manual

Pinnacle

Pinnacle PCTV 310E user manual

Nvidia ConnectX-7 user manual

Nvidia

Nvidia ConnectX-7 user manual

Allen-Bradley 2094-AL15S installation instructions

Allen-Bradley

Allen-Bradley 2094-AL15S installation instructions

Nvidia TESLA K20 installation guide

Nvidia

Nvidia TESLA K20 installation guide

OPTO 22 groov RIO Setup

OPTO 22

OPTO 22 groov RIO Setup

Analog Devices ADuCM322 Getting started guide

Analog Devices

Analog Devices ADuCM322 Getting started guide

Hitachi H8/3152 Hardware manual

Hitachi

Hitachi H8/3152 Hardware manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.