Avocent DSR Series DSR1010 Installation and maintenance instructions

Installer/User Guide
For models: DSR800 DSR1010 DSR2010 DSR4010
DSR™

INSTRUCTIONS
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
DANGEROUS VOLTAGE
This symbol is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
POWER OFF
This symbol indicates the principal on/off switch is in the off position.
POWER ON
This symbol indicates the principal on/off switch is in the on position.
PROTECTIVE GROUNDING TERMINAL
This symbol indicates a terminal which must be connected to earth ground
prior to making any other connections to the equipment.

Avocent, the Avocent logo, The Power of Being There, DSR,
OutLook, AutoView, DSView and OSCAR are trademarks or
registered trademarks of Avocent Corporation or its affiliates. All
other marks are the property of their respective owners.
© 2003 Avocent Corporation. All rights reserved.
DSR™
Installer/User Guide

USA Notification
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Canadian Notification
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescrites dans le Règlement
sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada.
Japanese Approvals
Taiwanese
BSMI Certification
Korean Certification
Director General of Radio Research Laboratory, Ministry of Information and
Communication, Republic of Korea Certificate of Information and Communication
Equipment E-E011-02-2836 (A) and E-E011-03-2392 (A)
Agency Approvals
EN55022 Class A, EN55024, EN6200-3-2, EN6100-3-3, FCC15 Class A, VCCI Class A,
IEC950, EN60950, UL 1950 third edition, CSA C22.2 No. 950

Table of Contents
Chapter 1: Product Overview
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2: Installation
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the DSR Appliance . . . . . . . . . . . . . . . . . 13
Chapter 3: Local Port Operation
Controlling Your System at the Local Port . . . . . . 23
Viewing and Selecting Ports and Servers . . . . . . . . 23
Navigating OSCAR . . . . . . . . . . . . . . . . . . . . . . . . . 25
Configuring OSCAR . . . . . . . . . . . . . . . . . . . . . . . . 27
Assigning Device Types . . . . . . . . . . . . . . . . . . . . . . 29
Changing the Display Behavior . . . . . . . . . . . . . . . 31
Controlling the Status Flag . . . . . . . . . . . . . . . . . . . 33
Broadcasting to Servers . . . . . . . . . . . . . . . . . . . . . . 34
Using Scan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting Console Security . . . . . . . . . . . . . . . . . . . . . 38
Setting the Keyboard Country Code . . . . . . . . . . . . 41
Managing Server Tasks Using OSCAR . . . . . . . . . 42
Viewing and Disconnecting User Connections . . . 44
Resetting Your PS/2 Keyboard and Mouse . . . . . . 45
Displaying Version Information . . . . . . . . . . . . . . . 46
Chapter 4: Terminal Operations
Accessing the Terminal Applications Menu . . . . . . 51
Appendices
Appendix A: FLASH Upgrades . . . . . . . . . . . . . . . . 57
Appendix B: Using DSRIQ-SRL Modules . . . . . . . 61
Appendix C: UTP Cabling . . . . . . . . . . . . . . . . . . . 66
Appendix D: Technical Specifications . . . . . . . . . . 68
Appendix E: Sun Advanced Key Emulation . . . . . 70
Appendix F: Technical Support . . . . . . . . . . . . . . . 72

Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1
Product Overview

Chapter 1: Product Overview 3
Chapter 1: Product Overview
Features and Benefits
Avocent’s DSR™appliances combine analog and digital technology to provide
flexible, centralized control of data center servers. This solution provides
enterprise customers with a significant reduction of cable volume, secure
remote access and flexible server management from anywhere at anytime.
The DSR appliance consists of a rack mountable keyboard, video and mouse
(KVM) switch configurable for analog (local) or digital (remote) connectivity.
Each DSR model has Avocent Rack Interface (ARI) ports for connecting
servers and serial devices via DSRIQ modules. Video resolution of 1280 x 1024
is supported for remote users of the DSR system. Enhanced video quality of
up to 1600 x 1280 is available for the local user via the keyboard, video and
mouse ports.
The DSR works over standard LAN connections. Users can access servers (or
serial devices) across a 100BaseT Ethernet connection or directly through a
local port on the DSR for remote KVM access and administration, depending
on the model selected. The IP-based DSR appliance gives you flexible server
management control from anywhere in the world.
Reduce cable bulk
With server densities continually increasing, cable bulk remains one of the
major concerns of every network administrator. The DSR significantly reduces
KVM cable volume in the rack by utilizing the innovative DSRIQ module and
single CAT 5 cabling. This allows a higher server density while providing
greater airflow and cooling capacity.
The built-in memory of the DSRIQ simplifies configuration by assigning
and retaining unique server names or Electronic ID (EID) numbers for
each attached server. This integrated intelligence enhances security and
prevents unauthorized access to a server through cable manipulation. The
DSRIQ module is powered directly from the server and provides Keep Alive
functionality whether or not the DSR appliance is powered up.
The DSRIQ-SRL (serial) module is a DCE device that provides the primary
interface between a serial device and a DSR appliance. It provides VT100
terminal emulation, break suppression and port history in a convenient
module. The DSRIQ-SRL is compatible with the ARI port of a DSR system.
These DSRIQ modules eliminate the need for extra rack space or additional
cables. The connection between the DSR system and DSRIQ modules is via
industry standard UTP cabling.

4DSR Installer/User Guide
Access the DSR via network connection
No special software or drivers are required on the attached, or host, computers.
Users access the DSR appliance and all attached systems via Ethernet from a
PC running the DSViewTM application residing on the user PC. User PCs can be
located anywhere a valid network connection exists. The DSR appliance can
be configured on a separate network from your data network, allowing access
to your servers even if your applications network is down.
Simple point and click access to any server
When a user activates DSView, it will display a listing of all computers and
serial devices to which the user has permission to access. When a user selects
a computer from the list, the video of the selected computer is displayed in a
session window. Multiple servers can be accessed by one user. Each additional
computer’s video will appear in a separate program window.
Create and manage user permissions with DES
encrypted security
An administrator describes the configuration of computers attached to the DSR
using an application called DSAdmin. Once the topology is described, the
administrator then establishes which computers a user has permission to
access. Usernames and passwords are derived from Windows NT®, eliminating
the need for redundant user databases. Once the topology is established, the
DSAuth software manages the system’s user permissioning. DSView polls the
server running DSAuth for access permissions on power up and every time a
switch is initiated for the most current permissions possible. A refresh is also
available for immediate updates to a user’s access profile. In addition to the
permissioning function, DSAuth also stores pertinent information about
attached devices in a database. Room location, rack location and computer
type can all be stored for quick reference.
Access serial devices
If an Avocent CPS810 or CPS1610 appliance is attached to the DSR unit,
operators can gain access to serial devices through the DSView software. When
a user connects to the network using DSView, a listing of all computers and
serial devices to which the user has permission to access displays. Selecting a
serial device will initiate a Telnet session.