AVYCON AVC-NPTZ21X30L User manual

1
AVC
NPTZ21X30L
2MP MINI PTZ DOME NETWORK CAMERA
QUICK START GUIDE

Package Contents.....................................................................................................................
Caution......................................................................................................................................
System Requirements...............................................................................................................
Hardware Overview...................................................................................................................
Camera Installation...................................................................................................................
- Mount Accessories.................................................................................................................
Outdoor Installation..................................................................................................................
Accessing the Network Camera...............................................................................................
TABLE OF CONTENTS
1
1
1
2
3
5
9
10

Thank you for purchasing this AVYCON IP Network Camera. This guide provides basic instructions
on installing and accessing this IP Network Camera. For more details, please refer to the User
Manual.
Package Contents
Before installation, please verify that all the necessary items are supplied in the box as the
package contents listed below. If any item is missing or damaged, please contact the shipper
and your Avycon Sales Representative.
ITEMS
DEFAULT
OPTIONAL
QUANTITY DESCRIPTION
Avycon Network Camera 1 Pc The purchased model
Power Adapter
Quick Start Guide
Warranty Card
Lens
Bracket & Screw Pack
1 Pc
1 Pc
1 Pc
DC 12V (Optional for part of devices)
Printed material
Printed material
If purchased
If purchased
Caution
* Do not expose the product to rain moisture
* Make sure the device is firmly fixed when mounting it on the wall or ceiling
* Make sure that the power supply voltage is correct before using ther camera
* Do not use a 3rd party Power Adapter
* Never attempt to disassemble or modify the camera
System Requirements
OPERATING SYSTEM: Windows XP / Vista / 7 / 8 /10 / Server 2000 / Server 2008
CPU: 1.66 Ghz or Higher
RAM: 1G or Higher
Graphic Memory: 128MB or more
Internet Protocol: TCP / IP (IPv4 / IPv6)
1 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L1

Hardware Overview - Speed Dome Network Camera
AVC-NPTZ21X30L
NOTE:
2 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
1) Only AC 24V is available for Speed Dome Network Camera power supply. AC 24V and PoE+ (802.3at)
are available for PoE Speed Dome Network Camera power supply;
2) Built-in SD card slot can be seen after removing the 4 screws and open the front panel;
3) Speed Dome on AI Camera Series only support 30X/36X Optical Zoom Lens.

3 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
Step1: Check the wall or ceiling condition. Ensure that there is sufficient strength to avoid
flaking. It should be able to bear the weight eight times larger than the camera’s;
Step2: Use the wall or ceiling hanging holder to mark the holes. Drill 4 holes on the wall or
ceiling;
Step3: Put the cables through the holder. Match the holder with the screw holes of the camera
body and secure them;
Step4: Make sure that the camera body has been correctly installed to the holder, and match
the holder to the holes on the wall or ceiling, then tighten up the screws;
Camera Installation
AVC-NPTZ21X30L

4 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L

5 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
The Junction Box is equipped for Wall Mount and Ceiling Mount in order to bring a rather
flexible and easy installation of Speed Dome and Mini PTZ Dome Network Camera.
Loosen the screws to open the front cover and rear cover, take out other parts from the box.
Install on the Wall Mount / Ceiling Mount
Step 1: Rotate to open the front cover over about 75°to conveniently take off it from the box;
Step 3: Take out the weather-proof connector, separate it to four parts as screw nut, rubber ring,
screw bolt and O-ring;
Camera Installation - Mount Accessories
AVC-NPTZ21X30L
Step 2: Install the rear cover first;

6 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
Step 8: The box supports top or bottom cable-out ways as below picture, through the top hole,
or tension disc which put cables through bottom or bottom back. For tension disc, please
remove it then cut an opening on the rubber plug, get cables through the opening. Please
remember to plug the rubber plug whenever the holes on it are not in use;
Step 4: Install camera on wall/ceiling mount accessory, put the camera cables through them.
The process would be easier if put the larger interface first;
Step 5: Put the camera cables through screw nut, screw bolt and O-ring;
Step 6: Take rubber ring circle over the cables and put it into screw bolt;
Step 7: Rotate screw nut on screw bolt to tighten, then pass all the cables through the entry hole
and rotate the whole weather-proof connector back on the front cover, and lock the accessory
back on the front cover;

7 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
Step 9: Carefully hold the front cover with wall/ceiling mount accessory and camera, put the
front cover stick into the rear cover. The set screw will lock the body securely;
Step 10: Connect camera cables with previous cables. Manage the cables well then close the
front cover and lock the screws.

8 2MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ21X30L
Install on the Pole Mount
Step 1: Rotate to open the front cover over about 75°to conveniently take off it from the box;
Step 3: Fix the rings with rear cover on the pole, fasten the screws;
Step 4: The following steps are the same as it installed on the wall mount.
Step 2: Loosen the screws of the fix rings, put rings through the back of the box body;