Award WO500/3 S User manual

OPERATING AND INSTALLATION
INSTRUCTIONS FOR
BUILT-IN OVEN
WO500/3 S

Dear Customer,
Wetakeofferingqualityproductsexceedingyourexpectations
as a goal, offering you products in modern facilities which are
carefullyandparticularlytestedforquality.
Your manual is prepared in order to help you to use your
appliancethatismanufacturedbythemostrecent technology,
withconfidenceandmaximumefficiency.
Before use of your appliance, carefully read this guide that
includes the basic information for right and safe installation,
maintenance and use. Contact an authorized
technicianformountingofyourproduct.

1
Contents
1- Presentation and size of product
2- Warnings
3- Preparation for installation and use
4- Using the oven
5- Cleaning and maintenance of your product
6- Service and Transport

2
PART 1: PRESENTATION AND SIZE OF PRODUCT
LIST OF COMPONENTS :
1- Control panel
2- Handle
3- Oven Door
4- Child Lock
5- Tray
6- Lower Heating Element (behind the plate)
7- Upper Heating Element (behind the plate)
8- Wire Grill
9- Racks
10- Oven Light
11- Turbo Heating Element(behind the plate)
12- Fan (behind the plate)
13- Air Outlet Shutters

3
PART 2: WARNINGS
READ THESE INSTRUCTIONS CAREFULLYAND COMPLETELY BEFORE USING YOUR
APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOURAPPLIANCE
MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY
ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES, WHILE YOU ARE READING THE
OPERATING MANUAL.
General Safety Warnings
- This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
- WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements. Children less than 8 years
of age shall be kept away unless continuously
supervised.
- WARNING: Danger of fire: do not store items on the
cooking surfaces.
- WARNING: If the surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
- The appliance is not intended to be operated by
means of an external timer or separate remote-control
system.
- During use, the appliance becomes hot. Care should
be taken to avoid touching heating elements inside the
oven.

4
- During use, handles held for short periods in normal
use can get hot.
- Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass and other surface
since they can scratch the surface, which may result in
shattering of the glass or damage to the surface.
- Do not use steam cleaners for cleaning the appliance.
- WARNING: Ensure that the appliance is switched off
before replacing the lamp to avoid the possibility of
electric shock.
- CAUTION: Accessible parts may be hot when the
cooking or grilling is in use. Young children should be
kept away.
- Your appliance is produced in accordance with all applicable local and international
standards and regulations.
- Maintenance and repair work must be made only by authorized service technicians.
Installation and repair work that is carried out by unauthorized technicians may endanger you.
It is dangerous to alter or modify the specifications of the appliance in any way.
- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure or electricity voltage and frequency) and the requirements of the appliance are
compatible. The requirements for this appliance are stated on the label.
- CAUTION: This appliance is designed only for cooking food and is intended for indoor
domestic household use only and should not be used for any other purpose or in any other
application, such as for non-domestic use or in a commercial environment or room heating.
- Do not try to lift or move the appliance by pulling the door handle.
- All possible security measures have been taken to ensure your safety. Since the glass may
break, you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on
the glass with accessories.
- Ensure that the supply cord is not wedged during the installation. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to prevent a hazard.
- While the oven door is open, do not let children climb on the door or sit on it.

5
Installation Warnings
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorized technician and put into use. The producer
is not responsible for any damage that might be caused by defective placement and
installation by unauthorized people.
- When you unpack the appliance, make sure that it is not damaged during transportation. In
case of any defect; do not use the appliance and contact a qualified service agent
immediately. As the materials used for packaging (nylon, staplers, styrofoam...etc) may cause
harmful effects to children, they should be collected and removed immediately.
- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun,
rain, snow etc.
- The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.
During usage
- When you first run your oven a certain smell will emanate from the insulation materials and
the heater elements. For this reason, before using your oven, run it empty at maximum
temperature for 45 minutes. At the same time you need to properly ventilate the environment
in which the product is installed.
- During usage, the outer and inner surfaces of the oven get hot. While opening the oven
door, step back to avoid the hot steam coming out of the oven. There may be a risk of burns.
- Do not put flammable or combustible materials, in or near the appliance when it is operating.
- Always use oven gloves to remove and replace food in the oven.
- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on
condition of extreme heating. Never pour water on to flames that are caused by oil. Cover the
saucepan or frypan with its cover in order to choke the flame that has occured in this case
and turn the cooker off.
- If you will not use the appliance for a long time, plug it off. Keep the main control switch off.
Also when you do not use the appliance, keep the gas valve off.
- Make sure the appliance control knobs are always in the "0" (stop) position when it is not
used.
- The trays incline when pulled out. Be careful not to let hot liquid spill over.
- When the door or drawer of the oven is open, do not leave anything on it. You may
unbalance your appliance or break the cover.
- Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper,
cloth...etc) into the drawer. This includes cookware with plastic accessories (e.g. handles).
- Do not hang towels, dishcloths or clothes from the appliance or its handles.
During cleaning and maintenance
- Always turn the appliance off before operations such as cleaning or maintenance. You can
do it after plugging the appliance off or turning the main switches off.
- Do not remove the control knobs to clean the control panel.
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE
RECOMMEND YOU ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR
AUTHORIZED SERVICE AGENTS IN CASE OF NEED.

6
PART 3: PREPARATION FOR INSTALLATION AND USE
Figure 1
When choosing a place for the oven, attention should be paid that there are no flammable
or combustible materials in the close vicinity, such as curtains, oil, cloth etc. which quickly
catchfire.
Furnitures surrounding the oven must be made of materials resistant to heat more than
50C°oftheroomtemperature.
Required changes to wall cabinets and exhaust fans above the built-in combined product
as well as minimum heights from the oven board are shown in Figure 1. Accordingly, the
exhaust fan should be at a minimum height of 65 cm from the hob board. If there is no
exhaustfantheheightshouldnotbeless than70cm.
Manufactured with best quality parts and materials, this modern, functional and practical
ovenwill meet yourneeds in allrespects. Make sureto read themanualto obtain successful
results and not to experience any problems in the future. The information given below
containsrulesthatarenecessaryforcorrectpositioningandserviceoperations.Theyshould
bereadwithoutfailespeciallybythetechnicianwhowillinstalltheappliance.
CONTACT THE AUTHORIZED SERVICE FOR INSTALLATION OF YOUR OVEN!
3.1. CHOOSING A PLACE FOR THE OVEN
There are several points to pay attention to when choosing a place for your oven.
Make sure to take into account our recommendations below in order to prevent any
problems and dangerous situations, which might occur later!

7
Insert the oven into cabinet by pushing it forward. Open the oven door and insert 2 screws in
theholeslocatedontheovenframe.Whiletheproduct frame touches thewoodensurfaceof
cabinet,tightenthescrews.
3.2. INSTALLATION OF BUILT_IN OVEN
C DETAIL
Cabinet cut-out sizes
You can use either cabinet 1
or cabinet 2 cut-out sizes
2
A
B
595mm
Min 25mm
580mm
560mm
600mm
1
555mm
575mm
560mm
A DETAIL
20mm
Minimum 40mm(The wooden
part can be extended up
to cut-out depth)
Product sizes
B DETAIL
Countertop
Built-in oven
Min.25mm
Control
panel
Distance between
countertop and
control panel
Min. 50mm
Built-in hob
Distance between
countertop snd
top panel of built-in
oven
Front
frame
Spacer
Mounting
screw
Wooden
part
C
555mm
595mm
570mm
555mm
Mounting screws
570mm
590mm

8
The dimensions and material of the cabinet in which the oven will be installed must be
correct and resistant to increases in temperature. In a correct installation, contact with
electrical or insulated parts must be prevented. Insulating parts need to be fitted in a way to
ensure that they cannot be removed by using any kind of tool. Installing the appliance in the
close vicinity of a refrigerator or a deep-freezer is not recommended. Otherwise, the
performance of the above-mentioned appliances will be negatively affected due to
emanating heat. After removing your oven from its packaging, be sure that the oven is not
harmed.In case you suspect anydamage tothe appliance, do not useit; immeditelycontact
anauthorizedtechnician.
3.3. WIRING AND SAFETY OF BUILT_IN OVEN
The instructions given below must be followed without fail during wiring :
Theearthingcablemustbeconnectedvia thescrewwiththeearthingmark.Supply cable
connection must be as shown in Figure 6. If there is no earthed outlet conforming to
regulationsintheinstallationenvironment,calltheAuthorizedServiceimmediately.
Theearthedoutletmustbeinclosevicinityoftheappliance.Neveruseanextensioncord.
Thesupplycableshouldnotcontacttheproduct’shotsurface.
Incaseofanydamagetothesupplycable,makesuretocallanauthorizedtechnician.The
cablemustbereplacedbyanauthorizedtechnician.
Wiring of the appliance must be performed by an authorized technician. H05VV-F type
supplycablemustbeused.
Faulty wiring may damage the appliance. Such damage will not be covered under the
warranty.
Theapplianceisdesignedtoconnectto220-240V~electricityisdifferenttothevaluegiven
above,callanauthorizedtechnicianimmediately.
The Manufacturer Firm declares that it bears no responsibility whatsoever for any
kind of damage and loss arising from not complying with safety norms!
Figure 6
BLUE
BROWN
YELLOW+GREEN

9
PART 4: USING THE OVEN
4.1 CONTROL PANEL
Oven Function
Control Knob Digital Timer Oven Thermostat Knob
Oven Thermostat Light
Oven Operation Light
Built_in Oven
Figure 11
Figure 12
4.2. USING THE OVEN PART OF THE APPLIANCE
Oven Function Control Knob:
To select the desired cooking function, turn the knob
to the related symbol(Figure 11). The details of the
oven functions have been explained in Table 1 and
overpage.
Oven Thermostat Knob:
Aftercookingfunctionisset,desiredtemperaturecan
be adjusted by oven thermostat knob (figure 12) and
oven start to operate (timer must be adjusted, if
available).
The thermostat signal light will be on or off according
tothermostatoperation.
50°
200°
Max
250°
100°
150°
Mode
50°
200°
Max
250°
100°
150°

10
Table 1
The oven light, the red warning light and the fan will be turned
on. Performs the function of defrosting frozen foods.
The oven’s thermostat and warning lights, the fan and the
turbo heater will be switched on.
The oven’s thermostat and warning lights, the fan and the
lower and upper heating elements will be switched on.
The oven’s thermostat and warning lights and the grill heater
function will be switched on.
The oven’s thermostat and warning lights, the upper heating
element and the grill heater function will be switched on.
The oven’s thermostat and warning lights, the upper heating
element, the grill heater and the fan function will be switched
on.
The oven’s thermostat and warning lights, the lower
heating element, the turbo heater, will be switched on.
the fan,
The oven’s upper heating element will be switched on.
The oven’s lower heating element will be switched on.
The oven’s thermostat and warning lights and the lower and
upper heating elements will be switched on.
The oven light will be turned on.
Availability of the functions explained below vary depending on the product model.
Defrost Function :
Figure 13
You can start the defrost operation by putting the frozen
food into oven and bringing the knob to the indicated
mark. This function does not cook/bake the food; it only
helps defrost it within a short time. Put the food to be
defrosted on the wire rack that you will place on the third
rack support from the bottom (Figure 13). To collect the
water that accumulates due to the melting ice, insert an
oventrayintothelowerrack.
4.3. USING THE OVEN FUNCTION CONTROL BUTTON

11
Lower-Upper Heating Element Function (Static Cooking) :
In this type of cooking which is described as the traditional method, the heat emanating
evenly from the lower and upper resistors into the oven ensures even cooking of the lower
andupper side ofthe food thatyou are cooking.Adjustthethermostat knob ofyour oven toa
temperaturerecommendedonthecooking tableforthecookingoperationyouwillperform.A
preheating of the oven for about 10 minutes is recommended. Leave food to cook, which is
placed in a suitable container, for the recommended duration. This position is a preferred
functioninmakingcakes, sponge cakes, pastry, baked pasta, lasagne, pizza.
After a cooking/baking, turn off the oven function control knob and the thermostat knob and
cancelthetimerprogramifavailable.Takethecooked/bakefoodoutoftheoven,placeitona
safe place and ensure that the oven completely cools off by keeping the oven door open. As
the oven will be hot, stay away from the oven and keep your children away as well.
Turbo Fan Function :
The turbo fan function evenly disperses the heat in the oven. All foods on all racks will be
cookedevenly.
Adjustthethermostatknobtothedesireddegree.Turnthefunctionknobso it will point to the
Turbo function symbol. After completing the preheating of 10 minutes, place the food
into the oven, which needs to be put into suitable containers. This function is suitable for
cookingmultipledishes.
If you are going to cook using two trays at the same time; while adjusting the cooking
temperature, select the temperature that is the lowest among the levels suitable for your
foods, as shown on the table. Cooking with two trays requires additional cooking time
compared to cooking with one tray. Usually, the foods on both trays do not finish at the same
time. Therefore, take the tray out of the oven, which you observed as finished and continue
thecookingoperationfortheothertray.
After the cooking/baking, turn off the oven function control knob and the thermostat knob
andcancelthetimerprogram if available.Takethe cooked/baked food outoftheoven,place
it on a safe place and ensure that the oven completely cools off by keeping the oven door
open.As the oven will be hot, stay away from the oven and keep your children away as
well.
Fan and the Lower - Upper Heating Element Function:
This is the position where the air coming from the lower and upper heating elements is
circulatedintotheovenbythefanmotorandblade.
Adjust the thermostat knob of your oven to temperature recommended on the cooking
table for the cooking operation you will perform. Turn the oven knob so it will point to the

12
symbol of this function, adjust the oven timer to the recommended time for cooking and
preheat the oven for about 10 minutes. The food placed in a suitable container is put into
the oven and the operation is started. This position is where very good
results are usually achieved in baking pastry. All parts of the foods will be cooked evenly in
this position.Suitable for cooking with one tray.
After the cooking/baking, turn off the oven function control knob and the temperature
setting knob and cancel the timer program if available. Take the cooked/baked food
out of the oven, place it on a safe place and ensure that the oven completely cools off
by keeping the oven door open. As the oven will be hot, stay away from the oven and
keepyourchildrenaway aswell.
Grill Function :
Turn youroven’sthermostatknob so it willpoint to thistemperature value.After a preheating
periodof5minutes,putyourfoodintotheoven.
Afterthecooking,turnofftheovenfunctioncontrolknobandthe thermostat knobandcancel
the timer program. Take the cooked/baked food out of the oven, place it on a safe place and
ensure that the oven completely cools off by keeping the oven door open. As the oven will
be hot, stay away from the oven and keep your children away as well.
Upper Heating Element and Grill Function :
Grill on the highest rack. After placing the oven tray on the second rack, you
canstartthegrilloperation.Placingatrayonthesecondrackwillensurethattheoildropping
from the foods will be collected. When grilling, the oven door must be closed and the
oven temperature should be adjusted to 190°C.
Turn youroven’sthermostatknob so it willpoint to thistemperature value.After a preheating
periodof5minutes,putyourfoodsintotheoven.
Afterthecooking,turnofftheovenfunctioncontrolknobandthe thermostat knobandcancel
the timer program if available. Take the cooked/baked food out of the oven, place it in a safe
placeandensurethattheovencompletelycoolsoffbykeepingtheovendooropen.
Thegrillonthe highest rack.Afterplacing the oven trayonthesecond rack, you canstartthe
grill operation. The tray placed on the second rack will ensure that the oil dropping from the
foods will be collected. When grilling, the oven door must be closed and the oven
temperature should be adjusted to 190°C.

13
As the oven will be hot, stay away from the oven and keep your children away as well.
Grill and Fan Function :
Grill on the highest rack. After placing the oven tray on the third rack, you can start the grill
operation.Thetrayplacedonthesecondrackwillensure thattheoildroppingfromthefoods
willbecollected.When grilling, the oven door must be closed and the oven temperature
should be adjusted to 190°C.
Turn youroven’sthermostatknob so it willpoint to thistemperature value.After a preheating
periodof5minutes,putyourfoodintotheoven.
Afterthecooking,turnofftheovenfunctioncontrolknobandthe thermostat knobandcancel
the timer program. Take the cooked/baked food out of the oven, place it in a safe place and
ensure that the oven completely cools off by keeping the oven door open. As the oven will
be hot, stay away from the oven and keep your children away as well.
Turbo Fan and Lower Heating Element Function :
Turbo Fan and the Lower HeatingElementFunctionisidealforbakingpizza.Whiletheturbo
fan evenly disperses the heat of the oven, the lower heating element ensures the baking of
thepizzadough.Adjustyouroven’sfunctionknobsoitwillpointtothesymbolofthisfunction.
After a preheating period of 10 minutes, put your foods into the oven.After cooking, turn off
the oven function control knob and the thermostat knob and cancel the timer program. Take
the cooked/baked food out of the oven, place it in a safe place and ensure that the oven
completely cools off by keeping the oven door open. As the oven will be hot, stay away
from the oven and keep your children away as well.
ENERGY SAVING
Duringuseofelectricalcookers,itisnecessarytousesaucepansthathaveflatbases.
Choosecookwareofpropersize.
Usingalidwillreducecookingtimes.
Minimizetheamountofliquidorfattoreducecookingtimes.
Whenliquidstartsboling,reducethetemperaturesetting.
Theovendoorshouldnotbeopenedoftenduringcookingperiod.

14
4.4. USING THE DIGITAL TIMER
-+
MODE
A
-+
MODE
A
Time Adjustment :
Thetimemustbeadjustedbeforestartingtousetheoven.Following
thepowersupplytotheoven,thesymbol(A)andthethree“0”onthe
screen will begin to flash. Press the (+) and (-) keys simultaneously.
The symbol will appear on the screen.Also, the dot in the middle
ofthescreenwillbegintoflash.Usingthe(+)and(-)keys,adjustthe
day’stimewhilethisdotisflashing.Aftertheadjustment,itshouldbe
expectedthatthedotwillbelitcontinuously.
Audible Warning Time Adjustment :
Thetimemustbeadjustedbeforestartingtousetheoven.Following
thepowersupplytotheoven,thesymbol(A)andthethree“0”onthe
screen will begin to flash. Press the (+) and (-) keys simultaneously.
The symbol will appear on the screen.Also, the dot in the middle
Following the power supply to the oven, when the symbol (A) and the three << 0 >>s on the
screen begin to flash, the oven cannot be operated using the control buttons. When the (+)
and (-) keys are pressed simultaneously for time adjustment, the symbol will appear on
the screen. When this symbol appears on the screen, you can manually operate the oven
part.As the adjusted time will be reset in the event of a power failure, time adjustment
operation willl have to performed again.
Figure 18
Figure 19

15
ofthescreenwillbeginto flash.Usingthe(+)and(-)keys,adjusttheday’stimewhilethisdot
is flashing. After the adjustment, it should be expected that the dot will be lit continuously.
This function can be used to recieve audible warning at the completion of the adjusted time
period.
PresstheMODEkey in the middle.The symbolwillflashon the screen.Alsothree “0”s will
appear. Adjust the desired time period for the warning by using (+) and (-) keys while the
symbolisflashing.Sometimeafterthecompletionoftheadjustment,the symbolwillbegin
to light continuously. When the symbol begins to light continuously, the audible warning
timeadjustmentisdone.
The audible warning time can be set to a time between the time range of 0 and 23.59.
Whenthe set timeis up, the timer givesan audible warningand the symbol beginsto flash
on the screen. Pressing any key will stop the audible warning and the symbol disappears
onthescreen.
Audible Warning time adjustment is for warning purposes only. The oven will not be
activated at this function.
Semi - Automatic TimeAdjustmentAccording to Cooking Period :
this position. Some time after the adjustment operation is completed, the day’s time wil
appear on the screen and the symbols (A) and will begin to continuously light on the
screen.Whiledoingthis,theovenwillalsostarttooperate.
A cooking period between the time range of 0 and 10 hours can be set. Atthecompletion
of the set duration, the timer wil stop the oven and give an audible warning.Also, the symbol
(A) will begin to flash on the screen. After bringing the oven button and oven thermostat
button to 0 position, pressing any button of the timer will end the audible warning.Also, the
timerwilbebroughttomanualusefunction.
Semi-Automatic Programming According to Finish Time:
Thisfunctionisusedtocookaccordingtodesiredfinishingtime.Thefoodtobecookedisput
into the oven. The oven is adjusted to the desired cooking function. The oven thermostat is
adusted to the desired degree depending on the dish to be cooked. Keep pressing on the
MODE button until you see “end” on the timer screen, the symbol (A) and the day’s time will
respectivelybegintoflash.
-+
MODE
Adu r
Thisfunctionisusedtocookinthedesiredtimerange.Thefoods
to be cooked are put into the oven. The oven is adjusted to the
desiredcookingfunction.Theoventhermostatisadjustedtothe
desired degree depending on the dish to be cooked. Keep
pressing on the MODE button until you see “stop” on the timer
screen. When you see “stop” on the timer screen, the symbol
(A) will begin to flash. Adjusted the cooking period for the food
youwishtocook,byusingthe(+)and(-)keyswhilethetimerisin
Figure 20

-+
MODE
AEn d
16
Adjustthefinishingtimeforthefoodyouwishtocook,byusingthe
(+) and (-) keys while the timer is in this position. Some time after
the adjustment operation is completed, the day’s time will appear
on the screen and the symbols (A) and will begin to
continuously light on the screen. While doing this, the oven will
alsostarttooperate.
You can set a time which can be up to 10 hours after the day’s
time.
At the completion of the set duration, the timer will stop the oven and give audible warning.
Alsothesymbol(A)willbegintoflashon thescreen.Afterbringingtheovenbuttonandoven
thermostatbuttonto0position,pressinganybuttonofthetimerwillendtheaudiblewarning.
Also,thetimerwillbebroughttomanualusefunction.
Full- Automatic Programming :
Thisfunctionisusedtocookafteracertainperiodoftime,withinacertainduration.Thefood
to be cooked is put into the oven. The oven is adjusted to the desired cooking function.The
oventhermostatisadjustedtothedesireddegreedependingonthedishtobecooked.
First;keeppressingontheMODEbuttonuntilyousee“stop” on the timerscreen.Whenyou
see “stop” on the timer screen, the symbol (A) will begin to flash.Adjust the cooking period
forthefoodyouwishtocook,byusingthe(+)and(-)keyswhiletimerisinthisposition.Some
time after the adjustment operation is completed, the day’s time will appear on the screen
andthesymbols(A)and willbegintocontinuouslylightonthescreen(Figure20).
A coking period between the time range of 0 and 10 hours can be set.
Second; keep pressing on the MODE button until you see “end” on the timer screen. When
you see “end” on the timer screen, the symbol (A) and the day’s time will begin to flash, with
theadditionofthecookingperiod.Adjustthefinishingtimeforthefoodbyusingthe(+)and(-
) keys while the timer is in this position. Some time after the adjustment operation is
completed, the day’s time will appear on the screen and the symbol (A) will begin to
continuouslylightonthescreen(Figure21).
You can set a time which can be up 23.59 hours after the time obtained br adding the
cooking periot the day’s time.
Theovenwillstart operating at thetimecalculatedby deducting the cookingperiodfromthe
setfinishingtime,andwillstopatthesetfinishingtime.Thetimerwillgiveanaudiblewarning
and the symbol (A) will begin to flash. After bringing the oven button and oven thermostat
button to 0 position, pressing any button of the timer will end the audible warning.Also, the
timewillbebroughttomanualusefunction.
Figure 21
Sound Adjustment
Whilethetimershowsthetimeofday;ifthe(-)buttononiskeptpressedfor1-2sec.,itwillgive
anaudible signalbeep.After that each time the(-) buttonis pressed, it will give three different
types of signal beep. Do not press any further buttons and it will save the last selected signal
type.

17
min min min min
4
3-4
4
1-2
1-2
1-2-3
1-2-3
1-2-3
2
1-4
1-4
1-2
1-2
2
1-2
1-2-3
1-2-3
2
1-2

18
Fifth rack
Fourth rack
Third rack
Second rack
First rack
4.5. ACCESSORIES USED IN THE OVEN
Itis recommended thatyou usethe containers indicatedon the table depending onthe food
you will cook in your oven, you can also use glass containers, cake cutters, special oven
trays suitable for use in your oven, available in the market. Pay attention to the information
given by the manufacturer firm concerning this issue. If small sized containers are used,
placethiscontainerontheinnergrillwire so it will be preciselyonthemiddleofthewire.The
informationgivenbelowshouldbeimplementedforenamelledcontainers.
Ifthefoodtobecookeddoesnotcompletelycovertheoventray,ifthefoodistakenoutofthe
deep-freezer or if the tray is used to collect the dripping juices of the foods during the grill
operation; deformation might be observed on the tray due to high temperatures forming
during the cooking/frying operation. This is normal, physical state thay results during the
heat transfer. Do not leave a glass tray or container in a cold environment immediately after
cookinginthem.Donotplacethemoncoldandwetsurfaces.Ensurethattheyslowlycoolby
placingthemonadrypieceofcloth.Otherwise,theglasstrayorcontainermightbreak.Ifyou
are going to perform a grill operation in your oven, we recommend that use use the grill on
tray, supplied togetherwith your product(if your product includesthis equipment).This way,
splattering and dripping oils will not make the oven interior dirty. If you are going to use the
large wire grill, insert a tray into one of the lower racks to avoid accumulation of the oils. To
make cleaning easier, add some water into it as well. In a grilling operation, use the third or
fourthrackandoilthegrilltopreventthefoodtobegrilledfromstickingtothegrill.
Wire grid: Used for grills or placing
different containers other than the cooking
trayonit.
Shallow tray: Used for baking pastry such
asflansetc.
Deep tray: Usedforbakingstews.
Figure22