Axesstel AXW-T800 User manual

AXW-T800 / 800R
AXW-T1900 / 1900R

NTRODUCTION
I
1
World Best CDMA WLL Technology
Axesstel's CDMA2000 1x fixed wireless terminals allow users to "get connected" to
voice and data services with unprecedented ease. Powered by QUALCOMM's
MSM5105 processor, these terminals provide data service through USB and RS-232
interfaces at rates of up to 153 Kbps. With RJ-11 phone connections, the users can
enjoy rich features ranging from basic voice service to caller ID, call waiting, 3 way calling,
and analog fax. User-friendly design and 4 LED indicators make these terminals easy
to set up and use.
Convenience Features
CDMA-2000 1x (backward compatible to IS-95 A/B) Data service capability (153.6 Kbps max)
4 multi-colored LED indicators (Power, Signal Strength, Call Connection,and Voice Mail)
Multi-extension (2 RJ-11 ports)
RS-232C and USB Data via Special Connector
Dial-Tone and DTMF Generation
Desktop or Wall-Mountable
Call Waiting, Forwarding, Transfer
Three-way Calling
Caller ID (displayed on Call ID campatible analog phone)
Voice Mail
Optional Range-extending Patch Antenna
Optional Analog Fax (IS-707-A.7, A.4 backward compatible)
Features
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

ABLES OF CONTENTS
T
2
World Best CDMA WLL Technology
Safety Precautions ----------------- 3
Checking Parts ---------------------- 4
Terminal Information --------------- 5
Getting to know the terminal----- 8
Basic Operation
Power On/Off -------------------------12
Making Calls --------------------------12
Receiving Calls ----------------------13
Advanced Features
Adjusting voice volume-------------14
Setting alarm--------------------------14
Setting 1 minute----------------------14
Setting connection alert------------ 15
Setting voice privacy alert--------- 15
Setting caller ID mode-------------- 16
Setting autosend time---------------16
Setting DTMF length----------------16
Change the Lock Code ------------ 17
Restricting Outgoing Calls -------- 17
Restricting international calls------18
Restricting long distance calls----18
Terminal reset-------------------------19
Data service---------------------------19
FAX Service (Option)
Fax Set-Up ----------------------------22
Sending Fax Messages ----------- 22
Receiving Fax Messages --------- 23
Optional Features
Call Waiting ---------------------------26
Three-Way Calling ------------------26
Call Forwarding ----------------------26
Caller ID -------------------------------26
Voice Mail Service ------------------26
Miscellaneous
Menu Options Table ----------------28
Troubleshooting --------------------- 28
Specifications ------------------------ 29
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

AFETY PRECAUTIONS
S
3
World Best CDMA WLL Technology
1. Avoid placing the phone in a dusty location, or near a source of gas or fire.
2. Don not shake, hit or drop the phone.
3. To clean the outside of the phone, use only a soft, dry cloth. The chemicals in alcohol,
benzine or acetone can damage the surface of the phone.
4. Do not twist or pull the cables.
5. Do not disassemble the terminal.
6. DO NOT use the power adapter if:
- The power cord is damaged.
- The adaptor has been damaged in any way.
7. Use only the AXESSTEL provided adapter. Do not use the AXESSTEL adapter for any
other purpose.
8. Use only the AXESSTEL provided antenna. Do not use the antenna for any other purpose.
9. Frequency and length of use can affect the life of the self-charging battery. Contact your
customer service if the battery is not operating properly.
10. Use only the designated self-charging battery. Dispose of exhausted batteries properly.
Never discard a battery in or near fire or flame.
11. Do not use the terminal near water, for example, near a bathtub, sink, wet basement,
or swimming pool.
NOTE: The input voltage and the shape of the plug may vary from country to country.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

HECKING THE PARTS
C
4
World Best CDMA WLL Technology
After opening the package, check to make sure that you have all the parts shown
below. If any piece is missing or broken, please call your agent or customer service.
Items marked optional may be available only on select models.
1
2
3
4
5
6
Fixed Wireless Terminal Main Unit
Antenna
AC/DC Adapter and AC Cord
User's Manual
Backup Battery (Optional)
RJ-11 Phone Cord
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

5
World Best CDMA WLL Technology
How to install internal battery (optional)
1. Open battery cover on the bottom side of the terminal.
2. Connect the DC power cable to terminal.
3. Insert the battery pack in the right position between the hold bars.
4. Close the battery cover.
Installing the RUIM Card (Optional for AXW-T450R/T800R/T1900R models only)
1. Put the RUIM card into the Socket as shown in the picture.
RUIM card
1
23
4
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone
ERMINAL INFORMATION
T

6
World Best CDMA WLL Technology
Desktop Installation
This FWT ACW-T800/T1900 operates by receiving electricity from an electrical outlet or internal
battery.
1. Connect the antenna on the back TNC connector of the terminal.
2. Connect a wire telephone to the terminal using an RJ-11 cord.
NOTE: Use the telephone compatible to FCC part 68 only. Non-compliant phones may not work
properly.
3. Plug the AC Adaptor jack into the DC 15V jack of the Terminal.
4. Plug the AC adaptor plug into an appropriate electrical outlet.
5. Connect an analog facsimile machine to one of the RJ-11 ports.
2
1
5
46
89
0#
3
7
MENU
CLEAR
STORE
RECALL
POWER
MESSAGE
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

7
World Best CDMA WLL Technology
Wall Mount Installation
1. Mark two mounting hole locations to match the screw hole in the back of the terminal.
2. Drill two holes at the marked locations.
3. Tighten the screws until the head is about 5mm from the wall.
5. Plug in the power connector and route the cord in the groove, if needed.
6. Screw the antenna into antenna connector.
7. Hang the terminal on the screw using the two holes in the back.
8. Push the terminal down until the unit is firmly locked into place.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

8
World Best CDMA WLL Technology
LED Color Meaning
Power Red Power is being supplied by AC adapter
Off No power / Power is being supplied by battery.
Signal Green Excellant Service Condition
Orange Good Service Condition
Red Voice through the line is not clear but a call is available.
Off No Service Condition
Blinking Incoming call
Battery
Off No battery is installed.
Voice Mail Green You have voice mail message. (If applicable)
Off Normal operation without any voice mail message.
LED indications
Type Condition Meaning
Normal dial Tone
No Service Tone
Outgoing call
restriction tone
Voice mail
tone
Confirmation
Error
Sound indications
continuous Terminal is in service area with adequate signal.
1.5sec on
800 msec off
Terminal cannot make or receive calls. (No signal)
800 msec on
200 msec off
Terminal is configured to block outgoing call but it
can receiving incoming calls.
beep-beep-
beep
You have voice mail message.
bee-bee-beep When using the menu with ** sequence, this
sound alerts successful entry.
howling beep When using the menu with ** sequence, this
sound alerts error entry.
Green If there is external power, chrged complete.
If there is external power, chrged .
Is not, full chrging.
Is not, medium chrging.
Orange
Red Low charged
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone
ETTING TO KNOW THE TERMINAL
G

Basic Operation
Power On / Off
Making Calls
Receiving Calls

10
World Best CDMA WLL Technology
OWER ON / OFF
P
There is power switch on the bottom side of the terminal.
1. Turn on the terminal by moving switch to ON position.
2. Press the power switch more than 2 seconds to turn off the FWT.
NOTE: When you turn on the terminal, it automatically searches for service signal. When it
successfully acquires service signal, it generates dial tone on the handset.
Starting with RUIM (AXW-T450R/800R/1900R models only)
When the Pin Code of R-UIM Card is turned on, you may need to enter the Pin Code when ou
power on the terminal.
1. Lift the receiver of the analog telephone.
2. Using the numeric keypad of the analog phone, enter Pin Code.
Note 1: Pin code checking can be turned on/off. Please see page ___.
Note 2: You may enter pin code up to 3 times. After 3 times, you will need to re-start the terminal.
Note 3: Default pin code is provided by the service provider. Please contact your service provide
in case you do not remember the pin code.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

11
World Best CDMA WLL Technology
MAKING CALLS
1. Check to see that your terminal is turned on.
2. Pick up the handset of the phone.
3. If you hear the dial tone, dial the desired telephone number, using the numeric keypad.
4. Wait for about 4 seconds until the call is automatically made by the terminal.
Note: Press or button to make all right away after entering the dial number.
5. When the other person answers, begin conversation.
Note: If Connection Alert is turned on, a beep is heard when the other person answers your call.
6. To hang up, put the handset back on the phone.
Note 1: Dial number of maximum 32 digits, including and , can be entered.
Note 2: To make a call to the pre-programmed emergency number, press and hold
for about 2 seconds. An emergency call will be made automatically.
2
1
5
46
89
0#
3
7
MENU
CLEAR
STORE
RECALL
POWER
MESSAGE
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

12
World Best CDMA WLL Technology
RECEIVING CALLS
The terminal signals the telephone(s) to ring when an incoming call is detected.
1. Pick up the telephone handset to answer the call.
2. To disconnect after finished, replace the handset on the phone..
Note 1: Make sure that the attached telephone ringer is enabled.
Note 2: When an incoming call comes in, when you are holding the receiver, press any key on
the numeric keypad of the phone to answer the call.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

Advanced Feature
Adjusting voice volume
Setting alarm
Setting 1 minute alert
Setting connection alert
Setting caller ID mode
Setting autosend time
Setting DTMF length
Chang the lock code
Restricting outgoing calls
Restricting long distance calls
Restricting international calls
Terminal reset

14
World Best CDMA WLL Technology
ADJUSTING VOICE VOLUME
SETTING ALARM
SETTING 1 MINUTE ALERT
You can control the volume level of the terminal.
1. Pick up the handset.
2. Press .
3. Press to raise or to lower volume.
Note: Some telephones may have their own volume control. Use both the terminal and the
telephone volume controls to optimize the sound level.
Alarm feature can be set to ring at a set time. The phone connected to the terminal
will ring.
To set up alarm time.
1. Pick up the handset.
2. Press .
3. Enter time (24 hour time). For 2:30PM, enter .
To disable alarm
1. Pick up the handset.
2. Press .
When this feature is enabled, a discrete tone is generated at each one minute interval
on the receiver during conversation for both incoming and outgoing calls. This tone is to
help the user keep track of the phone usage.
To change the setting:
1. Pick up the handset.
2. Press .
3. Press to enable or press to disable.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

14
World Best CDMA WLL Technology
ADJUSTING VOICE VOLUME
SETTING ALARM
SETTING 1 MINUTE ALERT
You can control the volume level of the terminal.
1. Pick up the handset.
2. Press .
3. Press to raise or to lower volume.
Note: Some telephones may have their own volume control. Use both the terminal and the
telephone volume controls to optimize the sound level.
Alarm feature can be set to ring at a set time. The phone connected to the terminal
will ring.
To set up alarm time.
1. Pick up the handset.
2. Press .
3. Enter time (24 hour time). For 2:30PM, enter .
To disable alarm
1. Pick up the handset.
2. Press .
When this feature is enabled, a discrete tone is generated at each one minute interval
on the receiver during conversation for both incoming and outgoing calls. This tone is to
help the user keep track of the phone usage.
To change the setting:
1. Pick up the handset.
2. Press .
3. Press to enable or press to disable.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

15
World Best CDMA WLL Technology
SETTING CALLER ID MODE
SETTING AUTOSEND TIME
SETTING DTMF LENGTH
If your phone connected to the terminal is caller ID enabled, you can set the terminal
to display the caller identification number or name on the telephoneÕs LCD display.
1. Pick up the handset.
2. Press for disable the Caller ID feature.
3. Press for DTMF Standard Type.
4. Press for FSK (Bellcore) type.
NOTE: The default setting of Caller ID is DTMF type.
When finished entering dial number, the terminal waits a fixed time before
attempting to make a call. This Òauto sendÓ time can be changed.
1. Pick up the handset.
2. Press . Then press ~ or . 4~9 seconds or off.
3. Press .
For example, to set 5 seconds, press .
Note: Default autosend time is 4 seconds.
Some ARS (Automatic Response Service) requires long DTMF tone.
1. Pick up the handset.
2. Press .
3. Press for long DTMF and for short DTMF.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

HANG THE LOCK CODE
C
ESTRICTING OUTGOING CALLS
R
16
World Best CDMA WLL Technology
The lock code prevents the terminal from being used by unauthorized person without
your permission. The default lock code is Ò Ó.
To change the lock code:
1. Pick up the handset.
2. Press .
3. Enter old 4 digit lock code followed by . For example . Beep sounds as
confirmation. If not correct, error tone will sound and the terminal returns to standby mode.
4. Enter new 4 digit lock code followed by . For example . Another beep
sounds as confirmation.
5. Re-enter 4 digit lock code followed by . For example . Another beep
sounds as confirmation. If not correct, error tone will sound and the terminal returns to
standby mode.
This feature can be used block outgoing calls from being made, but still wish to receive
incoming calls at any time.
1. Pick up the handset.
2. Press .
3. Enter 4 digit lock code.
4. Press to enable or to disable.
Note 1: Default lock code is " ". To change, see page 16.
Note 2: If someone tries to make a call when outgoing call restriction is enabled, the terminal
sounds beep and howler tone.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

ESTRICTING LONG DISTANCE CALLS
R
ESTRICTING INTERNATIONAL CALLS
R
17
World Best CDMA WLL Technology
This feature can be used block long distance calls from being made, but still wish to
receive incoming calls and make local calls.
1. Pick up the handset.
2. Press .
3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to
standby mode.
4. Press to enable or to disable.
Note 1: Default lock code is " ". To change, see page 16.
Note 2: If someone tries to make a long distance call when outgoing call restriction is enabled,
the terminal sounds beep and howler tone.
This feature can be used block international calls only, but still wish to receive
incoming calls and make domestic and local calls.
1. Pick up the handset.
2. Press .
3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to
standby mode.
4. Press to enable or to disable.
Note 1: Default lock code is " ". To change, see page 16.
Note 2: If someone tries to make an international call when international call restriction is
enabled, the terminal sounds beep and howler tone.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone

ERMINAL RESET
T
18
World Best CDMA WLL Technology
Resets the terminal back to the factory default state.
1. Pick up the handset.
2. Press .
3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby
mode.
4. Press to reset.
Note 1: Default lock code is " ". To change, see page 16.
Note 2: This feature is automatically set after 3 seconds with a confirmation tone.
Serial Cable & USB Cable
Depending on whether you use a serial cable with 9-pin RS-232 connector or a USB cable, the
terminal must be set to appropriate Port setting.
1. Pick up the handset.
2. Press to select Serial cable.
3. Press to select USB cable.
Data Port Speed
There are three speed options. Use appropriate speed setting for you use.
1. Pick up the handset
2. Press for high speed data service. (HDR 115.2Kbps)
3. Press for low speed data service. (ASYNC 19.2 Kbps)
4. Press for PC FAX. (19.2 Kbps)
ATA SERVICE T
D
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone