AXIOMTEK eBOX530-820-FL Series User manual

eBOX530-820-FL Quick Installation Guide
©Copyright 2009 AXIOMTEK Co., Ltd.
VersionA2April 2009
Printed in Taiwan
94260530020E
4
V. Installing the Hard Disk Drive
Step 1 Turn off the system, and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom,
loosen screws to remove the back cover.
Step 3 Assembly the HDD bracket, together with the HDD Mylar, and fix it
all into the system, and plug the power cable in HDD.
Step 4 Close the cover to the chassis, and fasten all screws.
MAXIMUM DEPTH OF THE HDD BRACKET : 2.5mm (when installing DIN
Mount)
D E P T H 2 . 5 m m M A X .
All Components are fragile and sensitive. If you need to replace or return any components for repair, you must
contact authorized technicians for a professional handling.
eBOX530-820-FL Quick Installation Guide
©Copyright 2009AXIOMTEK Co., Ltd.
VersionA2April 2009
Printed in Taiwan
94260530020E
1
I. Packing List
9eBOX530-820-FL System
Unit x 19Y Cable for PS/2 Keyboard & Mouse x 1
9eBOX530-820-FL Quick
Installation Guide x 1 9CD x 1 (for Driver and SBC User’s Manual)
9Power Cord x 1 925W 5V AC/DC Power Adapter
x 1
9Wallmount Bracket x 2 9NOTICE x1
9M3x4 Screws x 4 9HDD Mylar x1
¾Do not try to apply power to the system if any damaged
components.
II. Dimensions
There is a User’s Manual CD-ROM for the CPU card installed in your eBOX530-820-FL system. Please consult your
local vendor for assistance if you have any difficulties in installing. the system.

eBOX530-820-FL Quick Installation Guide
©Copyright 2009 AXIOMTEK Co., Ltd.
VersionA2April 2009
Printed in Taiwan
94260530020E
2
III. I/O Outlets
The following figures show you I/O outlets on front and rear panels
of the eBOX530-820-FL Series.
¾Front View
¾Rear View
All Components are fragile and sensitive. If you need to replace or return any components for repair, you must
contact authorized technicians for a professional handling.
COM1/2
CONNECTORS
4 x USB 2.0
CONNECTORS AUDIO
CONNECTORS
PS/2
CONNECTORS
FOR KB/MS
POWER-ON
SWITCH
V
GA
CONNECTOR
RJ-45
CONNECTOR
FOR ETHERNET
5V DC-IN
POWER INPUT
CONNECTOR
eBOX530-820-FL Quick Installation Guide
©Copyright 2009AXIOMTEK Co., Ltd.
VersionA2April 2009
Printed in Taiwan
94260530020E
3
IV. Installing the Memory Module
Step 1 Turn off the system, and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom,
loosen screws to remove the back cover.
Step 3 Locate the memory module, insert the gold colored contact into the
socket. Push the module down, until it is firmly seated by locking
two latches on the sides.
Step 4 Close the cover to the chassis, and fasten all screws.
There is a User’s Manual CD-ROM for the CPU card installed in your eBOX530-820-FL system. Please consult your
local vendor for assistance if you have any difficulties in installing. the system.