AXIOMTEK eBOX565-312-FL Series User manual

©Copyright 2018 Axiomtek Co., Ltd.
Version A1 March 2018
Printed in aiwan
9416K565010E
4
Installation of Express Mini Card
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the side of
the system, and then loosen two screws.
Step 3 Remove the bottom cover (notice the direction mark) and HDD
cover.
Step 4 Please follow your requirement to connect PCI Express Mini
Card module, EX: WIFI, mSATA and GPS.
Step 5 Slide Mini Card into Mini Card slot with caution, and fasten
screw of Express Mini Card.
Step 6 Recover the HDD cover and bottom cover, and then fasten two
screws on the side of the system.
Note: Please refer to the user’s manual to get more detail information.
eBOX565-312-FL Quick Installation Guide
©Copyright 2018 Axiomtek Co., Ltd.
Version A1 March 2018
Printed in aiwan
9416K565010E
1
Packing List
System Unit x 1 DVD/CD x 1 (for Driver & Manual)
Quick Installation Guide x 1 2-pin Terminal block x 1
Pre-installed Foot pad x 4 Screw pack x 1
 Do not try to apply power to the system if any damaged components.
Dimensions
eBOX565-312-FL Series Em edded System

©Copyright 2018 Axiomtek Co., Ltd.
Version A1 March 2018
Printed in aiwan
9416K565010E
2
I/O Outlets
The following figures show I/O outlets on the eBOX565-312-FL.
Front View
Rear View
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 March 2018
Printed in aiwan
9416K565010E
3
Installation of Hard Disk Drive
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the side of
the system, and then loosen two screws.
Step 3 Remove the bottom cover (notice the direction mark) and HDD
cover.
Step 4 Located SSD/HDD within the red line marked.
Step 5 Please prepare the following items to assemble SSD/HDD.
Step 6 Connected the SSD/HDD directly and make sure the insertion
is complete.