AXIOMTEK rBOX104-FL User manual

rBOX104-FL Quick Installation Guide
©Copyright 2011AXIOMTEK Co., Ltd.
Version A1 January 2011
Printed in Taiwan
9416M104010E
1
I. Packing List
9rBOX104-FL System
Unit x 1 9CD x 1 (for Driver and User’s Manual)
9rBOX104-FL Quick
Installation Guide x 1 9Din-rail Kit x1
9Screws 9GMA-500 VGA Hot Key
Notice x1
9Power terminal block
II. Dimensions
There is a User’s Manual CD-ROM for the CPU card installed in your rBOX104-FL system. Please consult your local
vendor for assistance if you have any difficulties in installing. the system.

rBOX104-FL Quick Installation Guide
©Copyright 2010AXIOMTEK Co., Ltd.
Version A1 October 2010
Printed in Taiwan
9416M104010E
2
III. I/O Outlets
The following figures show you I/O outlets on front view and top view
of the rBOX104-FL.
zFront View
zTop View
All Components are fragile and sensitive. If you need to replace or return any components for repair, you must
contact authorized technicians for a professional handling.
LED
4-Port PoE
LAN 1
COM 1/2
USB
DC Power Input w/
terminal block
RESET
V
G
A

rBOX104-FL Quick Installation Guide
©Copyright 2011AXIOMTEK Co., Ltd.
Version A1 January 2011
Printed in Taiwan
9416M104010E
3
IV. Installing the Memory Module
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the top cover from the system.
Step 3 Hold one side of the module, and insert the gold colored contact
into the socket. Push the module down. The memory module is locked by
two latches on the sides.
Step 4 Close the cover to the chassis, and fasten all screws.
There is a User’s Manual for the Memory & Compact Flash Card installed in your rBOX104-FL system.
Please consult your local vendor for assistance if you have any difficulties in installing. the system.

rBOX104-FL Quick Installation Guide
©Copyright 2010AXIOMTEK Co., Ltd.
Version A1 October 2010
Printed in Taiwan
9416M104010E
4
V. Installing the CompactFlash™ Card
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the cover from the system.
Step 3 Loosen these screws and remove the Thermal & CompactFlashTM
fixing bracket from the system.
Step 4 Insert the CompactFlashTM card into the socket until it is firmly
seated. Put the Thermal & CompactFlashTM fixing bracket back to
the system, and fasten screws tight close the Thermal &
CompactFlashTM fixing bracket.
Step 5 Put the cover back to the system, and fasten screws tight close the
chassis.
All Components are fragile and sensitive. If you need to replace or return any components for repair, you must
contact authorized technicians for a professional handling.