6
TURN CAMERA ON/OFF
- Turn on by pressing the power button (22)
7XUQRƬE\KROGLQJWKHSRZHUEXWWRQIRUVHFRQGV
7KHFDPHUDLVSUHFRQƮJXUHGWRDXWRWXUQRQDQGVWDUWUHFRUGLQJZKHQ
- It receives power eg - when vehicle engine is started.
7KHFDPHUDLVSUHFRQƮJXUHGWRDXWRWXUQRƬZKHQ
- It loses power eg - when vehicle engine is stopped.
- It is in standby for a long time without any button pressed.
7KHFDPHUDLVSUHFRQƮJXUHGWRDXWRVWRSUHFRUGLQJDQGWXUQRƬZKHQ
- When the internal battery runs out if there is no external power supply.
STORAGE CARD PREPARATION
- The camera supports dual MicroSD cards, both 128GB MAX. It is recommended to
use Class 6 or Class 10 high speed MicroSD cards to avoid storage problems.
- The videos can be stored in card A or card B slot depending on the setting.
- Insert a MicroSD card in the card slot. The camera will start auto recording if the power
is on once cards are formatted. See page 8 “Format Card”.
RECORDING A VIDEO
- When the camera is in standby, press the OK button to start recording.
- When the camera is recording, press the OK button to stop and enter standby.
7KHFDPHUDLVDOVRSUHFRQƮJXUHGWRDXWRVWDUWUHFRUGLQJRQFHLWUHFHLYHVSRZHULH
when the car engine is started.
7KHFDPHUDLVDOVRSUHFRQƮJXUHGWRDXWRVWRSUHFRUGLQJDQGWXUQRƬRQFHLWORVHV
SRZHULHZKHQWKH$&&LVRƬ
TAKING A PHOTO
- When the camera is in standby, hold the OK button for 2 seconds to take
a photo.
PLAYBACK ON CAMERA
- When the camera is in standby, hold the DOWN button to enter playback
on the camera.
- When the camera is in playback, hold the DOWN button for standby.
- When the camera is in playback, hold the UP and DOWN buttons to highlight the video
or photo you want to review, then press OK to view.
- When the camera is in playback, press the UP and DOWN buttons to highlight the
video or photo you want to edit, then hold UP button to activate the sub-menu:
'HOHWHƮOH3URWHFWƮOH$XWRSOD\&RS\WRDQRWKHUFDUG6ZLWFKFDUG
- Press UP and DOWN buttons to choose and then OK button to perform the action.
OPERATION