Axis P1405-E User manual

INSTALLATION GUIDE
AXIS P14-E Network Camera Series
AXIS P1405-E Network Camera
AXIS P1405-LE Network Camera
AXIS P1425-E Network Camera
AXIS P1425-LE Network Camera
AXIS P1427-E Network Camera
AXIS P1427-LE Network Camera
AXIS P1428-E Network Camera

Legal Considerations
Video surveillance can be prohibited by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
This product includes one (1) H.264 decoder license. To
purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or
use of this material. This product is only to be used for its
intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at http://www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-serviceable
components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM Implementers Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks
of SD-3C, LLC in the United States, other countries or both.
Also, miniSD, microSD, miniSDHC, microSDHC, microSDXC
are all trademarks or registered trademarks of SD-3C, LLC in
the United States, other countries or both.
Safety
This product complies with IEC/EN 60950-1 and IEC/EN
60950-22, Safety of Information Technology Equipment. The
product shall be grounded either through a shielded network
cable (STP) or other appropriate method.
The power supply used with this product shall fulfill the
requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according to IEC/EN 60950-1.
Photobiological Safety
AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: These
products fulfill the requirements for photobiological safety
according to EN 62471 (risk group 1).
Disposal and Recycling
When this product has reached the end of its useful life, dispose
of it according to local raws and regulations. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for incorrect
disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the
European Union member states. To prevent potential
harm to human health and the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For information about your nearest designated
collection point, contact your local authority responsible for
waste disposal. Businesses should contact the product supplier
for information about how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Should you require any technical assistance, please contact
appropriate channels according to your AVHS license agreement
to ensure a rapid response.
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.

Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/EC. See Safety.
• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling.
A copy of the original declaration of conformity may be obtained
from Axis Communications AB. See Contact Information.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when
installed according to the instructions and used in its intended
environment.
USA
This equipment has been tested using an unshielded network
cable (UTP) and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. This
equipment has also been tested using a shielded network cable
(STP) and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
Europe
This product fulfills the requirements for emission and
immunity according to EN 50121-4 and IEC 62236-4 railway
applications.
This product fulfills the requirements for immunity according
to EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according
to EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according
to EN 55024 office and commercial environments.
AXIS P1405-LE, AXIS P1425-E, AXIS P1425-LE, AXIS
P1427-E, AXIS P1427-LE:
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55022. The
product shall be connected using a shielded network cable
(STP) that is properly grounded. Notice! This is a Class A
product. In a domestic environment this product may cause
RF interference, in which case the user may be required to
take adequate measures.
AXIS P1405-E, AXIS P1428-E:
This digital equipment fulfills the requirements for RF
emission according to the Class B limit of EN 55022. The
product shall be connected using a shielded network cable
(STP) that is properly grounded.
Korea - ࢇЕɼࢽࡈ%ࢷ࢕ળࢶଢԻ۰
࣯Իɼࢽ߾۰یࡈଜЕʨࡶּࢶࡳԻଜֲֻҘ
ࠇ߾۰یࡈଟܹ࢑ݡТЬࢶࢸ஢ࢻѹ673
VKLHOGHGWZLVWHGSDLUৼࢇٴࡶیࡈଜࠆࢿ૽
ࡶࠉʼଜݫݤࠝ
Canada
AXIS P1405-LE, AXIS P1425-E, AXIS P1425-LE, AXIS
P1427-E, AXIS P1427-LE:
This digital apparatus complies with CAN ICES-3 (Class A).
The product shall be connected using a shielded network
cable (STP) that is properly grounded.Cet appareil numérique
est conforme à la norme NMB ICES-3 (classe A). Le produit
doit être connecté à l'aide d'un câble réseau blindé (STP) qui
est correctement mis à la terre.
AXIS P1405-E, AXIS P1428-E:
This digital apparatus complies with CAN ICES-3 (Class B).
The product shall be connected using a shielded network
cable (STP) that is properly grounded. Cet appareil numérique
est conforme à la norme CAN NMB-3 (classe B). Le produit
doit être connecté à l'aide d'un câble réseau blindé (STP) qui
est correctement mis à la terre.
Australia/New Zealand
AXIS P1405-LE, AXIS P1425-E, AXIS P1425-LE, AXIS
P1427-E, AXIS P1427-LE:
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded. Notice! This is a Class A
product. In a domestic environment this product may cause
RF interference, in which case the user may be required to
take adequate measures.
AXIS P1405-E, AXIS P1428-E:
This digital equipment fulfills the requirements for RF
emission according to the Class B limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
Japan
AXIS P1405-E, AXIS P1405-LE, AXIS P1425-E, AXIS
P1425-LE, AXIS P1427-E, AXIS P1427-LE:
AXIS P1428-E:
English
Safeguards
Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.
この装置は、クラスA 情報技術装置です。この装置を家庭環
境で使用すると電波妨害を引き起こすことがあります。この
場合には使用者が適切な対策を講ずるよう要求されることが
あります。本製品は、シールドネットワークケーブル(STP)を
使用して接続してください。また適切に接地してください。
この装置は、クラスB情報技術装置です。この装置
は、家庭環境で使用することを目的としていますが
、この装置がラジオやテレビジョン受信機に近接し
て使用されると、受信障害を引き起こすことがあり
ます。取扱説明書に従って正しい取り扱い
をして下さい。本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。

• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: IR emitted
from this product. Use appropriate shielding or eye
protection.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or
heavy pressure. Do not install the product on unstable
brackets, unstable or vibrating surfaces or walls, since this
could cause damage to the product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
Use a damp cloth for cleaning.
• Use only accessories that comply with technical
specification of the product. These can be provided by Axis
or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact
Axis or your Axis reseller for service matters.
• Use a limited power source (LPS) with either a rated output
power limited to <100 W or a rated output current limited
to <5 A.
• The product shall be connected using a shielded network
cable (STP). All cables connecting the product to the
network switch shall be shielded (STP) and intended for
their specific use. Make sure that the network switch is
properly grounded.
.
• This Axis product shall be used in compliance with local
laws and regulations.
• The Axis product should be installed by a trained
professional. Observe relevant national and local
regulations for the installation.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
Battery Replacement
This Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of 5
years. Low battery power affects the operation of the RTC,
causing it to reset at every power-up. A log message will
appear when the battery needs replacing. The battery should
not be replaced unless required!
If the battery does need replacing, please contact
www.axis.com/techsup for assistance.
• Dispose of used batteries according to the manufacturer's
instructions.
• Risk of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as
recommended by the manufacturer.
Français
Mesures de sécurité
Lisez attentivement le présent Guide d'installation avant
d'installer le produit Axis. Conservez le Guide d'installation
pour une utilisation ultérieure.
• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: Infrarouge
émis par ce produit. Utilisez des filtres appropriés, ou une
protection oculaire.
• Conservez le produit Axis dans un environnement sec et
aéré.
• Évitez d'exposer le produit Axis aux vibrations, aux chocs
ou à une forte pression. N'installez pas le produit sur un
support instable, ou des surfaces ou des murs instables ou
vibrants, car cela pourrait l'endommager.
• N'utilisez que les outils applicables pour installer le produit
Axis ; une force excessive pourrait endommager le produit.
• Pour le nettoyage, n’utilisez ni produits chimiques, ni
substances caustiques ou aérosols. Utilisez un chiffon
humide pour le nettoyage.
• N’utilisez que des accessoires conformes aux
caractéristiques techniques du produit. Ceux-ci peuvent
être fournis par Axis ou par un fournisseur tiers.
• Utilisez uniquement des pièces de rechange fournies ou
recommandées par Axis.
• Ne tentez pas de réparer le produit vous-même, contactez
Axis ou votre revendeur Axis pour toute réparation.
• Utilisez une source d'alimentation limitée (LPS) dont la
puissance de sortie nominale est limitée à <100 W ou dont
le courant de sortie nominal est limité à <5 A.
• Le produit doit être connecté à l'aide d'un câble réseau
blindé (STP). Tous les câbles reliant le produit au
commutateur réseau doivent être blindés (STP) et destinés
à leur usage spécifique. Assurez-vous que le commutateur
réseau est convenablement mis à la terre.
• Ce produit Axis doit être utilisé conformément aux lois et
réglementations locales en vigueur.
• Le produit Axis doit être installé par un professionnel
qualifié. Veuillez vous conformer aux règlements nationaux
et locaux relatifs à l'installation.
Transport
• Pour transporter le produit Axis et éviter de l'endommager,
utilisez l'emballage d'origine ou un emballage équivalent.
Remplacement des piles
Ce produit Axis nécessite une pile au lithium CR2032 de
3,0 V pour l'alimentation de son horloge en temps réel
interne. Dans des conditions normales d'utilisation, cette pile
est censée durer au moins 5 ans. Si la pile est faible, le
fonctionnement de l'horloge en temps réel peut être affecté
et entraîner sa réinitialisation à chaque mise sous tension.
Un message enregistré apparaît lorsque la pile doit être
remplacée. Ne remplacez la pile qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez contacter
www.axis.com/techsup pour obtenir de l’aide.
• Jetez les piles usagées conformément aux consignes du
fabricant.
• Le remplacement incorrect de la pile peut entraîner un
risque d'explosion.
• Remplacez la pile par une pile identique ou équivalente
uniquement, en respectant les recommandations du
fabricant.

Deutsch
Sicherheitsvorkehrungen
Bitte lesen Sie diese Installationsanleitung sorgfältig durch,
bevor Sie mit der Installation des Axis Produkts beginnen.
Halten Sie die Installationsanleitung bereit, falls Sie darauf
zurückgreifen müssen.
• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: Dieses
Produkt gibt Infrarotstrahlung ab. Verwenden Sie eine
geeignete Abschirmung oder Augenschutz.
• Lagern Sie das Axis-Produkt in einer trockenen und
belüfteten Umgebung.
• Setzen Sie das Axis Produkt keinen Vibrationen,
Erschütterungen oder starkem Druck aus. Installieren Sie
das Produkt nicht an instabilen Halterungen oder
instabilen oder vibrierenden Oberflächen oder Mauern, da
dadurch das Produkt beschädigt werden könnte.
• Verwenden Sie bei der Installation des Axis Produkts nur
geeignetes Werkzeug; zu hoher Kraftaufwand kann das
Produkt beschädigen.
• Verwenden Sie keine chemischen, ätzenden oder
aerosolhaltigen Reinigungsmittel. Verwenden Sie zur
Reinigung ein feuchtes Tuch.
• Verwenden Sie nur Zubehör, das den technischen
Spezifikationen des Produkts entspricht. Dieses ist von Axis
oder Drittanbietern erhältlich.
• Verwenden Sie nur Ersatzteile, die von Axis empfohlen bzw.
bereitgestellt wurden.
• Versuchen Sie nicht, das Produkt selbst zu reparieren.
Wenden Sie sich bei Service-Angelegenheiten an Axis oder
an Ihren Axis-Händler.
• Verwenden Sie eine Stromquelle mit begrenzter Leistung
(LPS), entweder mit einer Nennausgangsleistung von
<100 W oder einem dauerhaft auf <5 A begrenzten
Nennausgangsstrom.
• Das Produkt sollte mit einem abgeschirmten Netzwerkkabel
(STP) angeschlossen werden. Alle Kabel, die das Produkt
mit dem Netzwerkswitch verbinden, sollten abgeschirmt
(STP) und nur für die bestimmte Anwendung eingesetzt
werden. Stellen Sie sicher, dass der Netzwerkswitch
vorschriftsmäßig geerdet ist.
• Verwenden Sie dieses Axis-Produkt unter Beachtung der
vor Ort geltenden rechtlichen Bestimmungen.
• Das Axis Produkt sollte nur von geschultem Fachpersonal
installiert werden. Beachten Sie bei der Montage die
geltenden nationalen und lokalen Bestimmungen.
Transport
• Transportieren Sie das Axis-Produkt nur in der
Originalverpackung bzw. in einer vergleichbaren
Verpackung, damit das Produkt nicht beschädigt wird.
Batteriewechsel
Dieses Axis-Produkt ist mit einer 3,0 V CR2032
Lithium-Batterie als Stromversorgung für die interne
Echtzeituhr (RTC) ausgestattet. Unter normalen Bedingungen
hält die Batterie mindestens 5 Jahre. Bei entladener Batterie
ist der Betrieb der Echtzeituhr nicht mehr ausreichend
gewährleistet, so dass die Uhr bei jedem Systemstart
zurückgesetzt wird. Sie erhalten eine Protokollnachricht,
wenn ein Batteriewechsel erforderlich ist. Die Batterie sollte
erst bei Bedarf gewechselt werden.
Unter www.axis.com/techsup finden Sie Informationen
darüber, was Sie beim Austausch der Batterie beachten
müssen.
• Verbrauchte Batterien sind gemäß den
Herstelleranweisungen zu entsorgen.
• Explosionsgefahr bei fehlerhaftem Batteriewechsel!
• Die Batterie muss durch dasselbe oder ein gleichwertiges
Fabrikat ersetzt werden, das vom Hersteller zugelassen
ist.Reinigung der Kuppelabdeckung
Italiano
Sicurezza
Leggere attentamente questa Guida all'installazione prima di
installare un prodotto Axis. Conservare la Guida
all'installazione per ulteriori riferimenti.
• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: Luce
infrarossa emessa dal prodotto. Salvaguardare la vista
usando filtri adatti o lenti protettive.
• Conservare il prodotto Axis in un ambiente asciutto e ben
ventilato.
• Evitare di esporre il prodotto Axis alle vibrazioni, agli urti o
a forte pressione. Non installare il prodotto su staffe
instabili, superfici o pareti instabili o vibranti, poiché ciò
potrebbe danneggiare il prodotto.
• Utilizzare solo strumenti idonei quando si installa il
prodotto Axis. Una forza eccessiva potrebbe danneggiare il
prodotto.
• Non utilizzare sostanze chimiche, agenti caustici o
detergenti spray. Utilizzare un panno umido per la pulizia.
• Utilizzare solo accessori conformi con le specifiche
tecniche del prodotto. Queste possono essere fornite da
Axis o da terze parti.
• Utilizzare solo parti di ricambio fornite o raccomandate da
Axis.
• Non tentare di riparare il prodotto da soli, contattare Axis o
il rivenditore di zona Axis per assistenza.
• Utilizzare una sorgente di alimentazione limitata (LPS) sia
con una potenza di uscita nominale limitata a <100 W o
una corrente nominale di uscita limitata a <5 A.
• Il prodotto deve essere collegato con un cavo di rete
schermato (STP). Tutti i cavi che collegano il prodotto allo
switch di rete devono essere schermati (STP) e destinati al
loro uso specifico. Assicurarsi che lo switch di rete sia
correttamente messo a terra.
• Questo prodotto Axis deve essere utilizzato in conformità
alle leggi e alle disposizioni locali.
• Il prodotto Axis deve essere installato da un tecnico
qualificato. Osservare le disposizioni nazionali e locali per
l'installazione.
Trasporto
• Quando si trasporta il prodotto Axis, utilizzare l'imballo
originale o un imballo equivalente per evitare di
danneggiare il prodotto.
Sostituzione della batteria
Questo prodotto Axis utilizza una batteria al litio CR2032 da

3.0 V per alimentare il real-time clock (RTC) interno. In
normali condizioni questa batteria ha una durata di almeno 5
anni. La batteria scarica influisce sul funzionamento dell'RTC,
che viene reimpostato ad ogni accensione. Un messaggio di
registro apparirà quando la batteria dovrà essere sostituita.
La batteria non deve essere sostituita a meno che non sia
necessario.
Se la batteria deve essere sostituita, contattare
www.axis.com/techsup per assistenza.
• Smaltire le batterie usate secondo le istruzioni del
produttore.
• Rischio di esplosione se la batteria non viene sostituita
correttamente.
• Sostituire solo con una batteria identica o equivalente,
come raccomandato dal produttore.
Español
Medidas preventivas
Lea detenidamente esta Guía de instalación antes de instalar
el producto Axis. Guarde la Guía de instalación para poder
consultarla en el futuro.
• AXIS P1405-LE/AXIS P1425-LE/AXIS P1427-LE: Este
producto emite luz infrarroja. Utilice el blindaje o
protección ocular adecuada.
• Guarde el producto Axis en un entorno seco y ventilado.
• Evite exponer el producto Axis a vibraciones, golpes o
presiones excesivas. No instale el producto en soportes
inestables ni en superficies o paredes inestables o con
vibraciones, ya que esto podría dañarlo.
• Utilice solo las herramientas apropiadas para instalar el
producto Axis; una fuerza excesiva podría dañarlo.
• No utilice productos químicos, agentes cáusticos ni
limpiadores en aerosol. Límpielo con un paño húmedo.
• Utilice solo accesorios que cumplan las especificaciones
técnicas del producto. Puede obtenerlos de Axis o de un
tercero.
• Utilice solo piezas de recambio suministradas o
recomendadas por Axis.
• No intente reparar el producto usted mismo, póngase en
contacto con Axis o con el distribuidor de Axis para los
temas de servicio técnico.
• Use una fuente de alimentación limitada (LPS) con una
potencia nominal de salida limitada a <100 W o una
corriente nominal de salida limitada a <5 A.
• El producto se conectará mediante un cable de red
blindado (STP). Todos los cables que conecten el producto
al conmutador de red deberán estar blindados (STP) y
diseñados para su uso específico. Asegúrese de que el
conmutador de red disponga de una conexión a tierra
adecuada.
• Este producto Axis se utilizará de conformidad con la
legislación y normativas locales.
• La instalación del producto Axis debe realizarla un
profesional cualificado. Siga las normativas nacionales y
locales aplicables para la instalación.
Transporte
• A la hora de transportar el producto Axis, utilice el
embalaje original o uno equivalente para no dañar el
producto.
Sustitución de la batería
Este producto Axis utiliza una batería de litio CR2032 3.0 de
3,0 V como fuente de alimentación para su reloj de tiempo
real interno (RTC). En condiciones normales, esta batería
durará un mínimo de 5 años. Cuando la batería tiene poca
carga, el funcionamiento del RTC se puede ver afectado, ya
que esto puede hacer que se reinicie cada vez que se
encienda. Aparecerá un mensaje de registro cuando sea
necesario sustituir la batería. No se debe sustituir la batería a
menos que sea necesario.
Si necesita sustituir la batería, visite la página
www.axis.com/techsup para recibir asistencia.
• Deseche las baterías usadas según las instrucciones del
fabricante.
• Existe peligro de explosión si la batería se sustituye de
forma incorrecta.
• Utilice solo baterías de recambio iguales o equivalentes, de
acuerdo con las recomendaciones del fabricante.

AXIS P14-E Series Installation Guide Page 7
1x 1x 1x
Camera owner authentication key
The authentication key on this label is used to authenticate the owner/administrator of this Axis
camera. Thekey is associated with the camera’s unique serial number(S/N), as shown at the top of the
label. Theauthentication key is usedfor registering thecamera with a n AVHS service provider for hosted
video. For more information and help to find a localAVHS Service Provider, go to:
Please retain this document for futurereference.
http://www.axis.com/products/avhs/
Label here
©2006-2010 Axis Communications AB.
Axis is a reg istered trademark. All other company names and products are
trademarks or registered trademarks of their respectivecompanies. We
reserve the rig ht to introduce modifications without notice. Part No. 38655
1x
1x 1x 2x
1x 1x1x 1x
AXIS P1425-E
AXIS P1425-LE
AXIS P1427-E
AXIS P1427-LE
AXIS P1428-E
Horizontal
73,3mm (2,88”)
87,3mm (3,43”)
Part number: 49002

Page 8 AXIS P14-E Series Installation Guide
Power over Ethernet
IEEE 802.3af/802.3at
Type 1 Class 3
5 - 10 mm
(0.2 - 0.4 in)

AXIS P14-E Series Installation Guide Page 9
T10
microSD/
microSDHC/
microSDXC
1
2

Page 10 AXIS P14-E Series Installation Guide
15
3

AXIS P14-E Series Installation Guide Page 11
Horizontal
73,3mm (2,88”)
87,3mm (3,43”)
Part number: 49002
4
5

Page 12 AXIS P14-E Series Installation Guide
6
7

AXIS P14-E Series Installation Guide Page 13
8
AXIS P1425-E
AXIS P1425-LE
AXIS P1427-E
AXIS P1427-LE
AXIS P1428-E
165 mm
(6.5 in)

Page 14 AXIS P14-E Series Installation Guide
20
9
T10

AXIS P14-E Series Installation Guide Page 15
Horizontal
73,3mm (2,88”)
87,3mm (3,43”)
Part number: 49002
10
11

Page 16 AXIS P14-E Series Installation Guide
12
13

AXIS P14-E Series Installation Guide Page 17
14

Page 18 AXIS P14-E Series Installation Guide
15
AXIS P1425-E
AXIS P1425-LE
AXIS P1427-E
AXIS P1427-LE
AXIS P1428-E
165 mm
(6.5 in)

AXIS P14-E Series Installation Guide Page 19
20
16
T10

Page 20 AXIS P14-E Series Installation Guide
17