Axis AX1801BT User manual

INSTALLATION
1. This player should be installed by a professional technician.
2. Please read the instruction and operation of equipment carefully before
installing.
3. Make sure to connect other wires before power connection.
4. To avoid short circuit. Please make sure all the exposed wire are insulating.
5. Please fix all the wires after installation.
6. Please make all connections to the player according to this instruction
manual.
7.Wrong connection may cause damage.
INSTALL THE UNIT
REMOVE THE UNIT
Insert the keys supplied on the both sides of the unit until they click. Pulling
the keys and makes them to remove the unit from the dashboard.

WIRING CONNECTION
1. Do not connect the battery terminal until the player is fully installed.
2. Please make sure to connect the yellow wire to the positive of the battery(+).
3. When changing the fuse. Please make sure the specifications are the same.
4. Using good quality speakers with 4-8 ohm can result in the best effect of the equipment.
LOCATION OF CONTROLS
Microphone
13. DISP /CLOCK
14. PUSH/ENT/SEL
14.
15. 6 10+
16. 5 10-
17. 4RDM
7.
8. IR
9. LCD
10. USB Interface
11. AUX IN
12. MIC INPUT (Rear)
1. 1
2. MUTE
3. 2 INT
4. MODE
5. 3 RPT
6. BAND
3.5mm jack on the
rear panel of radio.

OPERATION
BASIC OPERATION
Turn on/off the unit & Mute function
Pressing /M MUTE button to turn on the unit. When the unit is on. Short press
this button for mute on/off. Press and hold this button to turn off the unit.
Sound and setting adjustment
Short press SEL button into the audio menu:
BASS->TRE->BAL->FAD->EQ(class/rock/pop/flat/off)->LOUD(on/off)
Press and hold SEL button for the setting menu:
CLOCK(HH)->CLOCK(MM)->CT(indep/sync)-CLOCK(24/12)->BEEP->P-
VOL->AREA(AUS/USA)->DX/LOC->STEREO/MONO
In each item rotating the VOL knob to set them.
Clock setting - manual
In the CLOCK(HH)/CLOCK(MM) item of the setting menu, rotate the VOL knob
to set the hour/minute.
CT(INDEP/SYNC):
CT INDEP: The clock works independently.
CT SYNC: The clock will be synchronized to the received RDS station’s time.
Note: When the time is set manually (See above). The CT will revert back to
INDEP mode automatically.
CLOCK 24/12: Setting the time to 24H or 12H format.
BEEP (ON/OFF): Turn on/off the beep sound.
P-VOL (Preset VOL): Setting the power on volume. If the volume at
shutdown is less than the P-VOL. The next time the unit is turned on, the
volume will be maintained at shutdown volume. If the volume at shutdown is
greater than the P-VOL. The next time you turn on the unit the volume will be
restored to the P-VOL value.
AREA (AUS/USA): To choose Australia frequency.
DX/LOC (Distance/Local):
LOC: Receive the strong signal station only in seek station.
DX: Receive strong and weak signal station in seek the station.
STEREO/MONO:
STEREO: Receive FM stereo signal.
MONO: Change FM stereo to mono. It can reduce the noise when the signal is
weak.

OPERATION
Play music via the aux in 3.5mm jack
Press MODE button switch to AUX IN source when inserting an audio source
to the 3.5mm jack of the unit.
Reset the unit
Press RESET button to restore all the data to factory settings. (Note:all
memories will be lost.)
RADIO OPERATION
Receive a radio station
Press MODE button to select FM or AM source. Then press BAND button to
select a band. Short press / button to receive the desired radio station.
Press and hold / button for manual tuning the frequency.
Auto Store station
Press and hold BAND button for 2 seconds to auto store stations to numeric
buttons 1-6 of band 1~3.
Manually store station & recall preset station
Tuning to a station with or button. Press and hold one of the 1- 6
preset button for 2 seconds. The current station is stored into the number
button. Short press the preset button (1~6) to listen to the station saved in the
corresponding preset button.
USB operation
When inserting a USB to the unit, the unit will play the MP3/WMA file
automatically. If a USB drive is already inserted in the unit, keep pressing
MODE button short until the USB mode display appears.
Select file
Press /button to skip to next/previous file. Hold / button to fast
forward or fast reverse.
Play/Pause
Press button to pause/playing the file.
INT function:
Press INT button to play the first 10 seconds of each file. Press INT button
again to cancel this function.
RPT function:
Press 3/RPT button to select repeat mode.
RPT FOLD: Repeat all files of the folder.
RPT ONE: Repeat the same file.
RPT ALL: Repeat all files (default).

OPERATION
Random function:
Press RDM button, all files will be played randomly. Press it again to cancel
this function.
Select a Directory
Way 1: Press DIR+/DIR- button to select directory upward or downward.
Way 2: Press BAND button 1 time. It will show DIR SCH. Rotate VOL knob to
select the desired directory to play.
+10/-10 file function
Press and hold DIR+/ DIR- button for 2 seconds it will skip +10/-10 file to play.
Searching files
Press BAND button 2 times. It will show “NUM ****“. Enter 0~9 numbers. Then
press SEL to confirm. It will play the song you selected.
(1~6, MODE=7, =8, =9, DISP=0, SEL =confirm, VOL=0~9)
CAUTION
When there are important files in the USB device do not connect it to the main
unit to play. Because any wrong operation may cause files loss. Our company
assumes no responsibility for this.
BLUETOOTH OPERATION
PAIRING
On mobile phone, select the Bluetooth item searching the Bluetooth device. “AX1801 BT”
should appear in the list, select “AX1801 BT” and then input password “0000” If it needs
a password. When successfully paired, the BT mark will be displayed on LCD.
Answering / rejecting an incoming call
Press key to answer the incoming call. Press key to reject or hang up
the call.
BT menu:
In BT source, press “2”key to download the phone book and shows the
Bluetooth menu:
BT VOL (28)->ANS(menu/auto)
BT VOL: The conversation volume is independent to other source volume.
You can set it to another value (default: 28). Note: If the volume was changed
in conversation. Next time the conversation volume will be at this level.
ANS (manual/auto)
ANS=manual:Press key to answer the call.
ANS=auto: When there is an incoming call, it will auto answer after 3 rings.

OPERATION
Transfer the call between mobile phone and unit
During the talking mode, press button to transfer the phone call between
the phone and the unit.
Disconnect the Bluetooth
After the phone is paired with the unit. Hold MODE key to disconnect /re-
connect the Bluetooth.
Note: The first time, pair with the mobile phone. You have to use mobile
phone to pair the unit.

SPECIFICATION
GENERAL
Power Supply Requirements : DC 12 -24Volts, Negative Ground
Chassis Dimensions : 178 (W) x 97 (D) x 50 (H)
Maximum Output Power : 4x40 watts
Current Drain : 10 Ampere (max.)
RADIO FM
Frequency Coverage 87.5 to 108 MHz.
IF 10.7 MHz
Sensitivity (S/N=30dB) 4μV
Stereo Separation >25dB
AM
Frequency Coverage 531 to 1602 KHz.
IF 450 kHz
Sensitivity (S/N=20dB) 36 d BuV
TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the
problems persist after checklist has been made, consult your nearest service
dealer.
Symptom
Cause
Solution
No power.
The car ignition switch is
not on.
If the power supply is connected to
the car accessory circuits, but the
engine is not moving, switch the
ignition key to “ACC”.
The fuse is blown.
Replace the fuse.
No sound.
Volume is in minimum
Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
The operation
keys do not
work.
The built-in microcomputer
is not operating properly
due to noise.
Press the reset button.
The radio does
not Work. The
radio station
automatic
selection does
not work.
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too weak.
Select a station manually.