Axis D3110 User manual

AXISD3110ConnectivityHub
UserManual

AXISD3110ConnectivityHub
TableofContents
Installation................................................3
Getstarted................................................4
Findthedeviceonthenetwork....................................4
Openthedevice'swebpage.......................................4
Webpageoverview..............................................5
Congureyourdevice........................................6
Setuprulesforevents...........................................6
Audio.........................................................0
Thedeviceinterface.........................................
Status........................................................
Audio.........................................................2
Recordings.....................................................3
Apps..........................................................6
System........................................................6
Maintenance...................................................32
Specications..............................................33
Productoverview................................................33
LEDindicators..................................................33
SDcardslot....................................................34
Buttons.......................................................34
Connectors....................................................34
Troubleshooting............................................37
Resettofactorydefaultsettings...................................37
Firmwareoptions...............................................37
Checkthecurrentrmwareversion.................................37
Upgradethermware............................................37
Technicalissues,clues,andsolutions................................38
Performanceconsiderations.......................................39
Contactsupport.................................................39
2

AXISD3110ConnectivityHub
Installation
Installation
Towatchthisvideo,gotothewebversionofthisdocument.
help.axis.com/?&piaId=72056&section=install
3

AXISD3110ConnectivityHub
Getstarted
Getstarted
Findthedeviceonthenetwork
TondAxisdevicesonthenetworkandassignthemIPaddressesinWindows®,useAXISIPUtilityorAXISDeviceManager.Both
applicationsarefreeandcanbedownloadedfromaxis.com/support.
FormoreinformationabouthowtondandassignIPaddresses,gotoHowtoassignanIPaddressandaccessourdevice.
Browsersupport
Youcanusethedevicewiththefollowingbrowsers:
ChromeTMFirefox®EdgeTMSafari®
Windows®recommendedrecommended
macOS®recommendedrecommended
Linux®recommendedrecommended
Otheroperatingsystems*
*TouseAXISOSwebinterfacewithiOS15oriPadOS15,gotoSettings Settings
Settings> > >Safari Safari Safari> > >Advanced Advanced Advanced> > >Experimental Experimental ExperimentalFeatures Features Featuresanddisable
NSURLSessionWebsocket.
Ifyouneedmoreinformationaboutrecommendedbrowsers,gotoAXISOSPortal.
Openthedeviceswebpage
.OpenabrowserandentertheIPaddressorhostnameoftheAxisdevice.
IfyoudonotknowtheIPaddress,useAXISIPUtilityorAXISDeviceManagertondthedeviceonthenetwork.
2.Entertheusernameandpassword.Ifyouaccessthedeviceforthersttime,youmustsettherootpassword.SeeSeta
newpasswordfortherootaccountonpage4.
Verifythatnoonehastamperedwiththermware
TomakesurethatthedevicehasitsoriginalAxisrmware,ortotakefullcontrolofthedeviceafterasecurityattack:
.Resettofactorydefaultsettings.SeeResettofactordefaultsettingsonpage37.
Afterthereset,securebootguaranteesthestateofthedevice.
2.Congureandinstallthedevice.
Setanewpasswordfortherootaccount
Thedefaultadministratorusernameisroot.There’snodefaultpasswordfortherootaccount.Yousetapasswordtherst
timeyoulogintothedevice.
.Typeapassword.Followtheinstructionsaboutsecurepasswords.SeeSecurepasswordsonpage5.
2.Retypethepasswordtoconrmthespelling.
3.ClickAdduser.
Important
Ifyoulosethepasswordfortherootaccount,gotoResettofactordefaultsettingsonpage37andfollowtheinstructions.
4

AXISD3110ConnectivityHub
Getstarted
Securepasswords
Important
Axisdevicessendtheinitiallysetpasswordincleartextoverthenetwork.Toprotectyourdeviceaftertherstlogin,set
upasecureandencryptedHTTPSconnectionandthenchangethepassword.
Thedevicepasswordistheprimaryprotectionforyourdataandservices.Axisdevicesdonotimposeapasswordpolicyasthey
maybeusedinvarioustypesofinstallations.
Toprotectyourdatawestronglyrecommendthatyou:
•Useapasswordwithatleast8characters,preferablycreatedbyapasswordgenerator.
•Don’texposethepassword.
•Changethepasswordatarecurringinterval,atleastonceayear.
Webpageoverview
Thisvideogivesyouanoverviewofthedeviceinterface.
Towatchthisvideo,gotothewebversionofthisdocument.
help.axis.com/?&piaId=72056&section=webpage-overview
Axisdevicewebinterface
5

AXISD3110ConnectivityHub
Confiureyourdevice
Confiureyourdevice
Setuprulesforevents
Tolearnmore,checkoutourguideGetstartedwithrulesforevents.
Triggeranaction
.GotoSystem>Eventsandaddarule.Theruledeneswhenthedevicewillperformcertainactions.Youcanset
uprulesasscheduled,recurring,ormanuallytriggered.
2.EnteraName.
3.SelecttheConditionthatmustbemettotriggertheaction.Ifyouspecifymorethanoneconditionfortherule,allofthe
conditionsmustbemettotriggertheaction.
4.SelectwhichActionthedeviceshouldperformwhentheconditionsaremet.
Note
Ifyoumakechangestoanactiverule,therulemustbeturnedonagainforthechangestotakeeffect.
Detecttamperingwithinputsignal
Thisexampleexplainshowtosendanemailwhentheinputsignaliscutorshort-circuited.Formoreinformationaboutthe
I/Oconnector,seepage34.
.GotoSystem>AccessoriesandturnonSupervisedfortherelevantport.
Addanemailrecipient:
.GotoSystem>Events>ecipientsandaddarecipient.
2.Typeanamefortherecipient.
3.SelectEmail.
4.Typeanemailaddresstosendtheemailto.
5.Thecameradoesn’thaveit’sownemailserver,soithastologintoanotheremailservertosendmails.Fillintherestofthe
informationaccordingtoyouremailprovider.
6.Tosendatestemail,clickTest.
7.ClickSave.
Createarule:
.GotoSystem>Events>ulesandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,underI/O,selectSupervisedinputtamperingisactive.
4.Selecttherelevantport.
5.Inthelistofactions,underNotications,selectSendnoticationtoemailandthenselecttherecipientfromthelist.
6.Typeasubjectandamessagefortheemail.
7.ClickSave.
6

AXISD3110ConnectivityHub
Confiureyourdevice
Activatealampwhenthewindowisopened
Thisexampleexplainshowtoconnectawindowcontacttoaconnectivityhub,andhowtosetupaneventtoactivatealamp
whenawindowwithacontactonitisopened.
Prerequisites
•Connecta2-wirecable(ground,I/O)tothewindowcontactandtotheI/Oconnectorontheconnectivityhub.
•Connectthelamptopowerandtotherelayconnectorontheconnectivityhub.
ConguretheI/Oportsintheconnectivityhub
.GotoSystem>Accessories.
2.EnterthefollowinginformationinPort1:
-Name:Windowsensor
-Direction:Input
-Normalstate:Closedcircuit
3.EnterthefollowinginformationinPort2:
-Name:Lamp
-Direction:Output
-Normalstate:Opencircuit
Createtworulesintheconnectivityhub
.GotoSystem>Eventsandaddarule.
2.Enterthefollowinginformation:
-Name:Windowsensor
-Condition:Digitalinput
SelectUsethisconditionasatrigger
-Port:Windowsensor
-Action:ToggleI/Owhiletheruleisactive
-Port:Lamp
-State:Active
3.ClickSave.
ActivateconnectivityhuboverMQTTwhencameradetectsmotion
Prerequisites
•CongureadevicefortheI/Oportintheconnectivityhub.
•SetupanMQTTbrokerandgetthebroker’sIPaddress,usernameandpassword.
•SetupAXISMotionGuardinthecamera.
SetuptheMQTTclientinthecamera
.Inthecamera’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowinginformation:
7

AXISD3110ConnectivityHub
Confiureyourdevice
-Host:BrokerIPaddress
-ClientID:ForexampleCamera
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-ThebrokerUsernameandPassword
2.ClickSaveandConnect.
CreatetworulesinthecameraforMQTTpublishing
.GotoSystem>Events>ulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:Applications>Motionalarm
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:On
-QoS:0,or2
3.ClickSave.
4.Addanotherrulewiththefollowinginformation:
-Name:Nomotion
-Condition:Applications>Motionalarm
-SelectInvertthiscondition.
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:Off
-QoS:0,or2
5.ClickSave.
SetuptheMQTTclientintheconnectivityhub
.Intheconnectivityhub’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowing
information:
-Host:BrokerIPaddress
-ClientID:Port
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-UsernameandPassword
2.ClickSaveandConnect.
8

AXISD3110ConnectivityHub
Confiureyourdevice
3.GotoMQTTsubscriptionsandaddasubscription.
Enterthefollowinginformation:
-Subscriptionlter:Motion
-Subscriptiontype:Stateful
-QoS:0,or2
4.ClickSave.
CreatearuleintheconnectivityhubforMQTTsubscriptions
.GotoSystem>Events>ulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:MQTT>Stateful
-Subscriptionlter:Motion
-Payload:On
-Action:I/O>ToggleI/Owhiletheruleisactive
-Port:I/O.
3.ClickSave.
Openalockwhenabuttonispressed
Thisexampleexplainshowtoconnectarelaytotheconnectivityhubandhowtosetupaneventtoopenalockwhensomeone
pressesabuttonconnectedtotheconnectivityhub.
Prerequisites
•Connecta2-wirecable(COM,NO)tothelockandtotherelayconnectorontheconnectivityhub.
•Connecta2-wirecable(ground,I/O)tothebuttonandtotheI/Oconnectorontheconnectivityhub.
ConguretheI/Oportsintheconnectivityhub
.GotoSystem>Accessories.
2.EnterthefollowinginformationinPort1:
-Name:Button
-Direction:Input
-Normalstate:Opencircuit
3.EnterthefollowinginformationinPort9:
-Name:Lock
-Normalstate:Opencircuit
Createaruleintheconnectivityhub
.GotoSystem>Eventsandaddarule.
2.Enterthefollowinginformation:
9

AXISD3110ConnectivityHub
Confiureyourdevice
-Name:Openlock
-Condition:I/O>Digitalinputisactive
SelectUsethisconditionasatrigger
-Port:Button
-Action:I/O>ToggleI/Oonce
-Port:Lock
-State:Active
-Duration:0s
3.ClickSave.
Audio
RecordaudiotoSDcard
ThisexampleexplainshowtosetuprecordingfromtwomicrophonestoanSDcard.
Beforeyoustart
•ConnecttwomicrophonesandinsertonemicroSDcardintotheconnectivityhub.
.GotoAudio>DevicesettingsandturnonInput0:IN1andInput1:IN2.
2.SelectInputtypeandPowertype.
3.Ifyouexpectthesoundlevelstovaryacrosstheroom,turnonAutomaticgaincontrol.
4.GotoSystem>Storage>Onboardstorageandsetetentiontime.
5.GotoAudio>StreamandselectEncoding.
Note
TokeeptheCPUloadlowwhenrunningmultiplestreams(forexamplerecordingandlivestreamfromthesamesource),use
thesameencodingforbothstreams.
6.GotoAudio>Listenandrecordandclick.
7.Click.
10