Axis Axis 210A User manual

DATASHEET
AXIS 210A and AXIS 211A deliver superior image quality
using progressive scan, in up to 30 frames per second in
640x480 VGA resolution.
Simultaneous MPEG-4 and Motion JPEG video
streams can be provided, allowing for optimization in
image quality and bandwidth.
AXIS 210A and AXIS 211A support two-way audio,
enabling remote users to not only view, but also listen in
on an area and communicate orders or requests to
visitors, customers or intruders.
AXIS 210A and AXIS 211A Network Cameras oer a cost-eective, IP-based solution for professional
security surveillance and remote monitoring, which make them an ideal choice for securing oces,
shops and other indoor and outdoor facilities.
AXIS 210A/211A Network Cameras
Superior video quality for professional indoor and outdoor applications.
> Superior image
quality
> Simultaneous MPEG-
4 and Motion JPEG
> Two-way audio
> Video motion
detection
> Power over Ethernet
AXIS 210A and AXIS 211A support video motion
detection and advanced event management, including
pre/post alarm image buering.
Both cameras support Power over Ethernet, allowing
power to be delivered via the network, which eliminates
the need for power cables and reduces installation
costs.

Technical specications – 210A/211A Network Cameras
www.axis.com
©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modications without notice.
33815/EN/R1/0811
Camera
Models AXIS 210A: indoor use only
AXIS 211A: DC-iris, indoor/outdoor
Image sensor 1/4” Progressive scan RGB CCD
Lens AXIS 210A: 4.0 mm, F1.2, fixed iris, CS mount,
horizontal angle of view: 48°
AXIS 211A: 3.0 – 8.0 mm, F1.0, DC-iris, CS mount,
horizontal angle of view 27° – 67°
Minimum
illumination
AXIS 210A: 1.0 lux, F1.2
AXIS 211A: 0.75 lux, F1.0
Shutter time 1/12500 s to 2 s
Video
Video
compression
MPEG-4 Part 2 (ISO/IEC 14496-2)
Motion JPEG
Resolutions 160x120 to 640x480
Frame rate
MPEG-4
Up to 30 fps
Frame rate
Motion JPEG
Up to 30 fps
Video streaming Simultaneous MPEG-4 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR MPEG-4
Image settings Compression, color, brightness, contrast, white balance, exposure
control, rotation, mirroring, fine tuning of behavior at low light
Text and image overlay
Privacy mask
Audio
Audio streaming Two-way, full or half duplex
Audio compression G.711 PCM 8 kHz
G.726 ADPCM 8 kHz
Configurable bit rate
Audio input/output Built-in microphone, external microphone input/line input, line
output
Network
Security Password protection, IP address filtering, HTTPS encryption,
IEEE 802.1X network access control, digest authentication, user
access log
Supported
protocols
IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, RTSP, RTP, TCP, UDP,
IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection, audio detection, active tampering alarm
Alarm triggers Intelligent video and external input
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video buffer 9 MB pre- and post alarm
General
Processors and
memory
ETRAX 100LX, ARTPEC-2
32 MB RAM, 8 MB Flash
Language support
(web interface)
English
Downloadable language files for French, German, Italian, Japanese
and Spanish are available at www.axis.com/techsup Other language
files may also be available
Power 7 – 20 V DC max. 7W
Power over Ethernet IEEE 802.3af Class 2
Connectors RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for 1 alarm input, 1 output and alternative power
connection
3.5 mm mic/line in, 3.5 mm line out
Operating
conditions
5 – 45 °C (41 – 113 °F)
Humidity 20 – 80% RH (non-condensing)
Approvals EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC
Part 15 Subpart B Class B, VCCI Class B, ICES-003 Class B,
C-tick AS/NZS CISPR 22, EN 60950-1
Power supply: EN 60950-1, UL, cUL
Weight 270 g (0.4 lb.)
Included
accessories
Power supply, connector kit, stand, Installation Guide,
CD with installation tool, recording software and User’s Manual,
Windows decoder 1-user license
More information is available at www.axis.com
Dimensions
210A
AXIS 211A
15 mm (0.6”) 132 mm (5.2”) 11 mm (0.4”)
36 mm (1.4”) 132 mm (5.2”) 8 mm (0.3”)
90 mm (3.6”)
88 mm (3.5”)
132 mm (5.2”)
108 mm (4.2”)
80 mm (3.2”)
5 mm (0.2”) (x3)
32 mm (1.3”)
210A
AXIS 211A
15 mm (0.6”) 132 mm (5.2”) 11 mm (0.4”)
36 mm (1.4”) 132 mm (5.2”) 8 mm (0.3”)
90 mm (3.6”)
88 mm (3.5”)
132 mm (5.2”)
108 mm (4.2”)
80 mm (3.2”)
5 mm (0.2”) (x3)
32 mm (1.3”)
210A
AXIS 211A
15 mm (0.6”) 132 mm (5.2”) 11 mm (0.4”)
36 mm (1.4”) 132 mm (5.2”) 8 mm (0.3”)
90 mm (3.6”)
88 mm (3.5”)
132 mm (5.2”)
108 mm (4.2”)
80 mm (3.2”)
5 mm (0.2”) (x3)
32 mm (1.3”)
Optional accessories
Various housings
AXIS 210A
27 mm (1.1”) 131 mm (5.1”) 11 mm (0.4”)
Lenses
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners, see
www.axis.com/products/video/software/