Axminster Woodturning Deluxe Pen Press User manual

5
6
7
86
Adjust the end support if needed to
push or to support the pen
5
34
2
Inset the pen
mechanism into
the 7mm bushing
Support the push
rod while operating
the toggle press
Support the pen &
carefully push the
pen mechanism out
Remove
the pen
mechanism
from the
bushing
Insert the 7mm tipped
end of the push rod
into the pen assembly
Move the sled
close to the arm
press and lock in
place
7mm Disassembly Bushing
Carefully push
out the pen nib
Lock
nut
1
Secure the 7mm bushing
into the sled clamp
Assembly/Disassembly
Deluxe Pen Press Instructions
• Combined tool for assembly and disassembly of pens
• Offers reliability, accuracy and control
• Press pen parts together for perfect results
• Allows disassembly of virtually any pen
• Features a strong arm with ergonomic handle
Code 106069
Date: 01.10.2021

1
5
7 8
6
1 2
3 34
21
2
43
A
B
B
C
DD
F
E
E
F G
G
• Assembly/Disassembly Press A
• Operating Handle B
• Disassembly Rubber Tube C
• Sprung Loaded Buffer D
• Clamping Knob E
• 7mm
Disassembly Bushing F
• 3.0mm Tipped Push Rod
G
• 5.5mm Tipped Push Rod
• 6.0mm Tipped Push Rod
• 7.0mm Tipped Push Rod
• 8.5mm Tipped Push Rod
• 9.0mm Tipped Push Rod
Lock
Sliding sled rack lever
Removable end support assembly to
utilise the full length of the sled rack
Clamp assembly with 19mm
clearance for larger diameter pens
Sliding sled
Rack
Sled Clamp
19mm clearance
Unlock
Pen Assembly using Sprung loaded Buffer General Disassembly using Rubber Tube
Continues Over...
DON’T OVER-TIGHTEN
Clamp the
pen in place
but not too
tight, to
prevent the
pen from
being
damaged
Move the sled closer to the arm press
and lock in place using the clamping
lever
Insert the tipped
end of the push
rod into the pen
assembly
3-9mm
Disassembly
Tipped push
rods
Sprung
loaded
buffer
Operating handle
Toggle press
mechanism
Arm press
Sled rack
Parts storage box
Foot
7mm
Bushing
170mm Scale
Removable end
support assembly
with adjustable
buffer.
Clamp
knob
Sliding sled clamping lever
Disassembly rubber tube
Sliding sled
rack lever
Use the scale to insert parts
equally, e.g. reputability
Cut the rubber tube
to the required length
4
Lock
Clamp the
sprung
buffer
in place
Assemble
the two parts
of the pen
together