Aztech WL852RT4(T) Manual

P R O D U C T E N G I N E E R I N G A N D S U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
Aztech WL852RT4(T)
150Mbps 4-Port Wireless-N Wireless Router
tep-by-step instruction guide to setup your WL852RT4(T) with a cable modem
1. Make sure that both the cable modem and the WL852RT4(T) are switched o .
2. Setup the physical connections between the cable modem, WL852RT4(T) and your PC.
3. Turn on the WL852RT4(T).
4. Click Start > Run. Type cmd on the open box and click Ok.

F r e q u e n t l y A k e d Q u e t i o n Page 2 of 3
P R O D U C T E N G I N E E R I N G A N D S
U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
5. Type ipcon ig and press Enter to veri y i your pc can get an IP address rom the WL852RT4(T).
6. Turn on the cable modem and wait or the Online LED to become steady.
7. Open your Internet browser and login to the web GUI by typing http://192.168.2.1.
8. Enter ‘admin’ in the username and password prompt.

F r e q u e n t l y A k e d Q u e t i o n Page 3 of 3
P R O D U C T E N G I N E E R I N G A N D S U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
C o n f i d e n t i a l D o c u m e n t
9. Check the Internet Connection Status on the Home page.