AZZA Z CSAZ-103 User manual

ZCSAZ-103
www.azzatek.com

Z
CSAZ-103
Mini-ITX Gaming Case
Black/Black(inside chassis)
0.6mm SECC
Ye s
No
up to 80mm
Mini ITX
Front Bottom
1
2
2
1x USB 3.0, 2xUSB 2.0, HD Audio
1x120mm LED fan on side
13.5"x4.4"x17.3" (342mmx112mmx440mm HxWxD)
8lbs
1x120mm LED fan on the side, intake the cool air in.
Support Regular ATX power supply. No need to use
special kind TFX or 1U power supply.
Support up to 2x120mm water cooling radiators.
Accommodate VGA card up to 11"
1xUSB 3.0, 2xUSB 2.0
Model
Model Name
Model Number
Specs
Type:
Color:
Material:
Side Panel Window:
With Power Supply:
CPU Cooler Compatibility:
Motherboard Compatibility:
Power Location
Expansion
External 5.25" Drive Bays:
Internal 3.5" Drive Bays
Expansion Slots:
Front Ports:
Cooling System
120mm Fan:
Physical Spec
Dimensions(HxWxD)
Weight
Feature
Exceptional Cooling System
Support ATX power supply
Maximum Capacity water cooler
Support longest VGA card
USB 3.0 Ready
Easy install CPU cooler
Specifications
A cut-off hole is prepared for installing CPU cooler with
ease, eliminating the need for prior removal of the
motherboard.

Case
Left Side Panel
Right Side Panel
Stand
Front Panel
USB/Audio
Fan
Power Cord
PCI-E cable
1
2
3
4
5
6
7
8
9
Parts List
4
6
7
5
1
2
3
8
9

Aircooling system
VGA/ PSU Cooling
CPU/ WATER Cooling

POWER
RESET
RESET
USB 2.0(Black)
USB 3.0(Blue)
Mic
Audio
Diagram
Assembly kit
Figure Parts Name Quantity
M3*5 screw
Motherboard tray
6*6 Hex washer screw
M2*4 screw
14
1
5
6
112mm 440mm
342mm

Installation Instruction
1.Remove the Front Cover 2.Remove the Side Cover
1.1 pull the front cover to remove as shown in the figure. 2.1 Remove the thumbscrews and pull the side covers
toward the back of the case, as shown in the figure.
5.HDD Installation
5.1 Loosen the screws and remove the HDD tray.
5.2 Insert HDD into the tray, and fasten the screws as shown in the figure.
5.3 Put the HDD tray back, fasten the screws then.
5.4 Connect the HDD cable.
3.Remove the Cooling System Bracket
3.1 Loosen the screws to remove the cooling system bracket.
4.PSU Installation
4.1 place the PSU into the chassis as shown figure.
4.2 connect the PSU cable, then tighten the screws to secure the PSU in place.

7.1 Install the I/O cover on the rear side of the chassis.
7.2 Place the motherboard into the slot as shown in the
figure, and fasten the screws.
7.Motherboard Installation
9.1 A Cooling system bracket is provided that accommodates
the installation of 120 / 240 mm water cooling system.
9.Cooling System Installation
Maximum 240 mm
120 mm
8.1 loosen the screw, and remove the VGA holder.
8.2 Install the VGA Card, and fasten the screws.
8.3 Remove the sticker(s) and paste the rubber pad(s) on the VGA holder if necessary.
8.4 Put VGA holder back, and connect the PCI-E cable.
8.VGA Card Installation
6.ODD (BD/DVD-ROM) Installation
6.1 Insert the ODD device, and fasten the screws.

Front Connector Installation Guide
Please refer to your motherboard user manual on the sections of “USB connector”And “audio connector”.
Please verify the pin definition before connecting the connectors to the motherboard
Remark:
1. USB and Audio connectors have foolproof design, can only be inserted in one direction
2. LED connectors have electrically positive and negative poles