Baby Jogger city GO User manual

babyjogger.com
This child restraint system conforms to all applicable
Federal motor vehicle and safety standards.
This child restraint conforms to
ASTM F2015:13a and 16CFR1225.
Este sistema de retención infantil cumple con todas las
leyes y normas de seguridad vigentes. De acuerdo a la
ASTM F2015:13a and 16CFR1225.
Car Seat & Base
Asiento de Coche y Base

2
TABLE OF CONTENTS
Registration............................................................................................................................................3
Warnings..................................................................................................................................................5
Vehicle Installation Safety......................................................................................................9
Features..................................................................................................................................................12
Adjusting the Handle................................................................................................................15
Attaching the Canopy..............................................................................................................15
Body Support...................................................................................................................................16
Seat Installation Without Base
• Lap Belt Only.........................................................................................................................17
• Lap/Shoulder Belt Only.............................................................................................18
Base Installation
• LATCH........................................................................................................................................20
• Lap/Shoulder Belt............................................................................................................21
• Lap Belt Only.......................................................................................................................22
Attach Seat to Base.................................................................................................................23
Seat Recline......................................................................................................................................25
Placing Child in the Carrier................................................................................................27
Adjusting the Harness...........................................................................................................28
Adjusting the Buckle................................................................................................................30
Adjusting the Waist Strap.....................................................................................................31
Securing the Child in the Restraint...........................................................................33
Base Storage...................................................................................................................................35
Care and Maintenance.........................................................................................................36
Warranty................................................................................................................................................37

3
REGISTERING YOUR CHILD RESTRAINT
Please complete the pre-paid registration card that is
attached to your child restraint and send the portion
shown below in today.
Child restraints could be recalled for safety reasons. You
must register this restraint to be reached in a recall. Send
your name, address, email address if available and the
restraint’s model number and manufacturing date to:
Baby Jogger, LLC
8575 Magellan Parkway, Suite 1000
Richmond, VA 23227
or call 1-800-241-1848
Tear o and mail this part. Please print clearly in the spaces below.
Name
Mailing Address
City State Zip Code
Email Address
BABY JOGGER® CITY GO™
MODEL NO:
SERIAL NO:
MANUFACTURED IN (YYYY/MM/DD):
DO NOT USE AFTER (YYYY/MM/DD):
Baby Jogger, LLC • 8575 Magellan Parkway, Suite 1000 • Richmond,VA 23227
1.800.241.1848 • www.babyjogger.com MADE IN CHINA

4
Call the U.S. Government’s Vehicle Safety Hotline
at 1-888-327-4236 (TTY: 1-800-424-9153), or go
to http://www.NHTSA.gov.
This child restraint conforms to all applicable
Federal motor vehicle safety standards. This
restraint is certified for use in motor vehicles and
aircraft.
It is not intended to be used in low-speed vehicles
such as golf carts, ATV’s or any other non-certified
vehicles.
If you have any questions regarding installation of
your seat, please contact us at:
Baby Jogger, LLC
8575 Magellan Parkway, Suite 1000
Richmond, VA 23227
1-800-241-1848
www.babyjogger.com
For information regarding child restraints:
www.NHTSA.gov
www.saferproducts.gov
www.seatcheck.org
FOR RECALL INFORMATION
CERTIFICATION
IF YOU NEED ASSISTANCE OR HAVE ANY
QUESTIONS

5
WARNING
DO NOT place rear-facing child seat on front seat
with air bag. DEATH OR SERIOUS INJURY can
occur. The back seat is the safest place for children
12 and under.
WHEN USED IN YOUR VEHICLE
• Only place this child restraint in a rear-facing direction on a forward
facing vehicle seat when using it in a vehicle. NEVER install this
child restraint on vehicle seats that face the side or rear of the
vehicle.
• Never leave child unattended.
• Read these instructions carefully before using and before installing
this seat in a vehicle. Additionally, for important information on
installing child restraints, read the vehicle owner’s manual. Failure to
completely follow the instructions provided in this manual as well as
the labels on this product can result in DEATH or SERIOUS INJURY.
• DO NOT ALLOW anyone who has not read the instruction manual
to install or use this child restraint.
• Register your child restraint with the manufacturer.
• According to accident statistics, children are safer when properly
restrained in rear seating positions, than in the front seating
positions.
• Owners of vehicles with side airbags should refer to their owner’s
manual for child restraint installation instructions.
• For low birth-weight infants, you must always use the insert in the

6
body support. The insert must be used for infants who weigh less
than 6 lbs (2.7 kg). Only use the body support when the harness is
used in the bottom 2 sets of harness slots.
• Some children with special needs, such as pre-term babies or those
who have tested positive for positional apnea, may be at increased
risk of suering breathing or other diculties in a child restraint. If
your child has special needs, we recommend consulting a physician
to determine the proper child restraint for your child before using
this product.
• Snugly adjust the belts provided with this child restraint around your
child.
• Secure this child restraint with the vehicle’s child restraint anchorage
system (LATCH) if available or with a vehicle belt, never both.
• Never leave an infant restraint and base unsecured in your vehicle. An
unsecured infant restraint or base can be thrown around and may injure
occupants in a sharp turn, sudden stop, or crash.
• To prevent ejection, securely attach the child restraint to the base
and lift up to check that it is attached.
• Make sure nothing interferes with the carrier attachment to the
base.
• ALWAYS store the LATCH connectors when they are not being
used for installation.
• NEVER place two LATCH connectors on one vehicle LATCH anchor.
• If installing carrier without base in vehicle, check the red level line
beneath the handle to make sure that it is level with the ground.
• DO NOT allow children to play with or around this child restraint.

7
FOR USE AS AN INFANT CARRIER
• Read all instructions before use of the infant carrier.
• Keep instructions for future use.
• NEVER LEAVE child unattended.
• SUFFOCATION HAZARD: Infant carrier can roll over on soft
surfaces and suocate child. NEVER place carrier on beds, sofas
or other soft surfaces.
• Children have STRANGLED in loose or
partially unbuckled harness straps. Fully
restrain the child even when carrier is used
outside the vehicle.
• FALL HAZARD: Child’s activity can move
carrier. NEVER place carrier near edges of
counter tops, tables or
other elevated surfaces. DO NOT use on shopping carts.
• Never use infant carrier or base if it has been damaged or broken or any
component is missing. Do not use a cut, frayed or damaged child restraint
harness, vehicle seat belt or LATCH belt.
• NEVER use this child restraint with other manufacturer’s strollers or
with strollers for which it was not intended.
• ALWAYS MAKE SURE handle is locked in the upright carrying position
before lifting. An unlocked handle could result in serious injury to your
child from falling from the child restraint.
• Always replace the child restraint and base after a crash of any kind
even if it was unoccupied. A crash can cause unseen damage to the
child restraint that may not be visible.
• Do not modify your child restraint or base or use any accessories

8
or parts not supplied by the manufacturer of your child restraint.
• The child restraint may become very hot if left in the sun or hot areas.
Always make sure to check the temperature of any metal or plastic
parts before placing your child in the child restraint.
• NEVER use a second-hand child restraint or base or a child
restraint or base that you do not know its history.
• DISCONTINUE USE of this child restraint after 6 years from the
manufacture date. The manufacture date can be found on the
underside of your child restraint.
• DO NOT use this child restraint unless your child meets the
following height and weight criteria.
Weight: 4-35 lbs
(1.8 - 15.9 kg)
Height: 32 in (81 cm) or
less in height
Child’s head MUST be 1” (2.5
cm) or more below the top of
the seat as shown here.
1" (2.5 cm)

9
LATCH stands for Lower Anchors and Tethers for
Children.
The LATCH system makes installation easier without using
the vehicle’s seat belts. LATCH is a way to secure your child
restraint to your vehicle by using the LATCH connectors on your child
restraint base. These connectors attach to the lower points in certain
vehicle seating positions.
The child restraint base is designed to be used at the standard
spacing of 11” from the center of
one anchor point to the center
of another anchor point. Please
refer to your vehicle owner’s
manual for information about
using LATCH in certain seating
positions.
LATCH may be used for spacing
larger than 11” ONLY if your
vehicle manufacturer allows it.
If your vehicle does not have
lower anchor points, you can still
install your child restraint with the
vehicle’s belt system.
LATCH SYSTEM
11” 11”

10
1WARNING!
• Failure to place the child restraint in the correct seating positions
increases the risk of serious injury or death.
• DO NOT place rear-facing child seat on front seat with
air bag. DEATH or SERIOUS INJURY can occur.
• The back seat is the safest place for children 12 and
under. Owners of vehicles with airbags should refer
to their owner’s manual for child restraint installation
instructions.
1 The VEHICLE seat must face forward.
2 NEVER place the child restraint on any vehicle seat that
does not lock. Folding seats can fall forward and could
cause serious injury to your child in a vehicle crash.
VEHICLE SEAT LOCATIONS
1 2
Motorized
Shoulder Belt
with Lap Belt
Non-Locking
Lap Belts with
Emergency
Locking Retractor
(ELR)
Lap or
Shoulder Belt
Mounted on
Vehicle Door
Lap/Shoulder
Belts with 2
Retractors
(including
inflatable
seatbelts)
UNSAFE VEHICLE SEAT BELTS
WARNING! The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types listed are in the chosen seating
position, choose another seating position within in the vehicle.
3 4
2