Baby Jogger ASTM F833-07A User manual

Read these
instructions carefully
before use and
keep them for
future reference.
Your child’s safety may be
affected if you do not follow
these instructions.
Assembly
Instructions
City Elite Double
Amazing 360° Turns
Make For Extreme Maneuverability
This product complies with BS EN 1888:2003 inc. A1,2,3: 2005
This product complies with ASTM F833-07a

2
• WARNING: DO NOT exceed 3 mph – this stroller is not suitable for running,
jogging, skating or roller blading.
• WARNING: Prevent serious injury to your children by always using the
safety harnesses.
• WARNING: Parcels or accessory items, or both, placed on the unit may cause
the unit to become unstable.
• WARNING: Never leave your children unattended.
• WARNING: Recommended weight for seat pocket is 2 lbs and basket is
4.4 lbs. Excessive weight may cause a hazardous unstable condition to exist.
• WARNING: Stroller is not meant to be used for transporting children up or
down stairs. Damage resulting to stroller, will not be covered under warranty.
• WARNING: Child may slip into leg openings and strangle. Never use in
reclined carriage position unless safety harness is properly fastened.
• Accessories which are not approved by the manufacturer or distributor
shall not be used.
• The passengers shall remain seated (no standing in the stroller).
• Watch out for cars – never assume that a driver can see you and your children.
• Total weight load recommended for this stroller is 100 lbs / 45.36 kg
(combined passengers and baggage weight).
• This stroller seats two passengers.
• It may be unsafe to use replacement parts other than those supplied or approved
by the manufacturer.
For the sake of your precious cargo, please read
these warnings before using your stroller.
1
1Unpack stroller from box and set rear wheels
aside. Ensure that storage strap is not fastened
around frame before unfolding stroller.
2Pull front wheel fork up from
underneath the handlebar. Then,
pull bottom of frame up and
away from handlebar.
3Lay stroller flat so that both ends are resting
on the floor. The stroller frame will click and
lock into place.
To fold: Unsnap safety strap from frame and pull up on fold strap.
4Turn stroller over.
WARNING: Ensure all
locking devices are
engaged before use.
Frame

2
Front Wheels
3
1To install front wheel, lay stroller back so the
handle is resting on floor.
2 Align the round opening on the top of the front
fork with the round metal peg underneath the
foot plate. Slide the front wheel onto the metal
peg until it clicks into place.
To remove the front wheel, press down on the lever on the
top of the front fork and slide the wheel off.
Front Wheel Locking Lever
Turn to the left to lock front wheel.
Turn to the right for swivel action.
Rear Wheels
1To install, gently slide the rear wheel’s axle into the hole in the frame until the wheel clicks into place.
2To remove, simply press the
wheel button while gently
sliding the wheel away from
the frame.

4
Safety Harnesses
1Unclip top of shoulder
strap from the seat and
re-clip on the pair of
seat loops closest to
your child’s shoulder
height.
2To adjust the shoulder
and crotch strap length:
Remove the shoulder
pads and slide the
plastic guide up or
down to lengthen or
shorten.
5
3To buckle the harness: Simply
push side buckle into center
buckle until it locks into place.
To unbuckle: Push one side of
the center button and pull the
corresponding side buckle away
from the center buckle. Repeat
to unbuckle other side.
WARNING: Always use the crotch strap in combination with the
shoulder straps and waist belt.
WARNING: Engage
parking device
before loading
and unloading
passenger.
Brake
• To engage parking brake: Gently
pull brake lever into upright
position until it clicks into place.
• To release parking brake:
Pinch gray tabs and pull
towards you. Push brake
lever down until it is
parallel with the frame.

6
To remove canopy: stand facing the stroller
and press the bracket buttons with index
finger while removing canopy from the
bracket.
1To attach canopy to frame, simply slide canopy
axle into top hole of the bracket on the
frame, until you hear it click into place. The
bottom hole can be used for accessories (sold
separately), and they should be inserted into
bracket the same way as the canopy.
Canopy
3Secure canopy around frame
with velcro tab.
2Snap webbing together
around top of frame.
4Once canopy is in place,
attach the console by
aligning the velcro strips
on the console and
canopy.
7
Seat
1Secure seat fabric to
frame by lining up
snap placement on
frame and fabric.
To fold stroller:
Remove child
from seat.
Unsnap safety
straps from
frame and pull
upwards on the
fold straps with
a gentle tug.
3Secure safety straps to both
sides of the frame before use.
4Be sure that fold strap rings are secured to the
frame before use.
2Secure seat straps around the bottom
of the frame, behind the front wheels.
Thread one seat strap through the D
ring of the other strap, and fasten both
Velcro sides firmly together.
WARNING: Always be
sure the safety strap
Is securely snapped
onto the frame
before using stroller!

9
8
Raised Kickers
Basket
1To use the raised kicker, pull up
on seat flap above the footplate,
and remove the kicker stand
from storage pocket. Attach the
kicker stand to the seat with the
hooks provided under seat flap.
2Attach kicker stand by
wrapping both sides of the
webbing under the footplate.
Thread one side of the velcro
webbing through the D ring
of the other side, and secure
velcro together.
3When not using the raised
kicker, tuck the kick stand
and the webbing straps into
the pocket provided under
the seat.
Reclining Seats
1 To recline: Pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down on
both sides to match recline position of clamp.
Reverse steps to return to the upright position.
• Weather Cover: If desired, pull weather cover
down and over the seat back mesh. Secure
firmly over both sides of seat. When not in use,
roll weather cover up and fasten with elastic
loop and barrel provided under top of the seat
fabric.
1Remove child from stroller.
From the front of the stroller:
Remove lower seat fabric to
expose bottom front portion
of frame. Fasten basket Velcro
around frame tubing on right
side. Repeat on left side.
Re-apply seat fabric to frame
once complete.
3From the rear of the stroller:
Fasten the top snaps of the
basket around frame tubing
above the middle support
bar. Fasten the bottom snaps
around the frame tubing
above the middle support
bar. Repeat on other side.
2Tilt stroller back so the handle
is flat on the floor. Fasten
front middle snap of the
basket around frame tubing
under the footwell. Return
stroller to upright position.
4Fasten the middle snap of
the basket around center
frame tubing, above the
middle support bar.

10 11
Steering
• Steering your stroller is simple: It is balanced to turn with just a light touch on the handlebar without
having to lift the front wheel.
In the Dark
• Since we are concerned about the safety of you and your child, we recommend that you not use
your stroller at night. However, if you choose to, please attach reflective strips to the wheels and the
seat. Bicycle lights can also be mounted on the handle crossbar. These accessories can be found at
most bike stores.
Maintenance
• To preserve the longevity of your stroller, it is important to perform simple, regular maintenance.
The tires on your stroller are foam filled. Though the P.S.I is printed on the tire, you will never need
to inflate them. From time to time, make sure that the joints and folding areas are still in good
condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop
for added lubrication. All repairs should only be carried out by an authorized dealer.
In Motion
Quick Fold
Technology
Simple Lift & Fold (Patented)
WARNING: Always be
sure the safety strap
Is securely snapped
onto the frame
before using stroller!
To fold stroller:
1Remove child from seat. Remove safety straps from frame.
Pull upwards on the fold straps with a gentle tug.
The sample product shown in this manual may differ slightly from your production quality Elite stroller.
However, this will not affect the assembly or functionality of your Baby Jogger stroller.
NOTE: When contacting
Baby Jogger regarding your
stroller, please have your
stroller’s serial number and
manufacturing date ready.
They can be found on the
lower back portion of the
frame, above the right wheel.

12 13
Washing
• You can machine wash your stroller’s seat in cold water with a mild detergent.
To minimize shrinkage, simply reattach the seat to the frame to dry.
(Please do not put the seat in the dryer!)
• Be sure to remove the frame from the back of the seat
before washing.
Wheel Care
• The wheels can be cleaned using a damp cloth. They
will need to be dried completely with a soft towel or cloth.
Storing
• Sunshine can fade seat fabric and dry out tires, so storing your stroller indoors will
prolong its good looks. However, if you do store it outside, using a tarp will help
protect against weather wear.
Stroller Care
Baby Jogger's Limited Lifetime Warranty:
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include
but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components
shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a
warranty claim and the warranty is only extended to the original purchaser.
THIS WARRANTY DOES NOT COVER:







fitness for a particular purpose is according to the specific warranty period for this model unit at time of purchase. Some states do not allow the


consult your local or state consumer affairs office or your state’s Attorney General.
E-MAIL: 
CALL: 
 1-804-262-6277
MAIL: BABY JOGGER COMPANY
8575 Magellan Parkway
Suite 1000
 
WARRANTY REGISTRATION ON-LINE AT
www.babyjogger.com/register

14
We wish you many happy journeys with your new
stroller! Your stroller is a great product, and we
are proud to manufacture it. If you have any
questions or comments, please give us a call at:
1.800.241.1848
Baby Jogger is a Division of Dynamic Brands
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227
T: 800.241.1848 • F: 804.262.6277 • www.babyjogger.com
Thank You!