Baby Jogger CITY SELECT User manual

Read these
instructions carefully
before use and
keep them for
future reference.
Your child’s safety may be
affected if you do not follow
these instructions.
Assembly
Instructions
City Select
Amazing 360° Turns
Make For Extreme Maneuverability

2
• WARNING: DO NOT exceed 3mph – this stroller is not suitable for running, jogging,
skating or roller blading.
• WARNING: Prevent serious injury to your child by always using the safety harness.
• WARNING: Parcels or accessory items, or both, placed on the unit may cause the unit
to become unstable.
• WARNING: Never leave your child unattended.
• WARNING: Recommended weight for seat pocket is 2 lbs and basket is
15 lbs. Excessive weight may cause a hazardous unstable condition to exist.
• WARNING: Stroller is not meant to be used for transporting children up or down
stairs. Damage resulting to stroller will not be covered under warranty.
• WARNING: Child may slip into leg openings and strangle. Never use in reclined
carriage position unless safety harness is properly fastened.
• Accessories which are not approved by the manufacturer or distributor
shall not be used.
• The passenger shall remain seated (no standing in the stroller).
• Watch out for cars – never assume that a driver can see you and your child.
• Total weight load recommended for this stroller is 45 lbs / 20.4 kg per seat
(combined passenger and baggage weight).
• This stroller seats one passenger. Additional accessory items may be purchased to seat
more than one passenger. (Maximum Passenger Loaded: 2 Passengers/per stroller)
• It may be unsafe to use replacement parts other than those supplied or approved
by the manufacturer.
• Always have your brake locked when loading and unloading of children.
NOTE: The sample product illustrated in this manual may differ slightly from your production quality
City Select. However, this will not affect the assembly or functionality of your Baby Jogger product.
For the sake of your precious cargo, please read
these warnings before using your stroller.
1
1Unpack stroller from box and set wheels aside.
2Unsnap storage lock from around the frame.
3Pull bottom of frame up and away
from handlebar.
4The stroller frame will click into place.
WARNING: Ensure all
locking devices are
engaged before use.
Frame
5To adjust handle length: Simply squeeze gray
button on handle and slide the handle up
or down to the desired length.

2
Front Wheel
3
Rear Wheels
1To install front wheel: Lift up slightly on the
front left portion of the stroller frame. Align
the round opening on the wheel mount with
the front wheel axle. Slide the front wheel
into opening until it clicks into place. Repeat
on other side.
1To install rear wheel: Gently slide the rear
wheel’s axle into the hole in frame until the
wheel clicks into place.
2To remove rear wheel: Simply press the
wheel button while gently sliding the wheel
away from the frame.
2 To remove front wheel: Press gray tab on
front wheel mount and slide front wheel out.
3To engage stationary wheel: Slide gray lever,
located above front wheel, to the left. Repeat
on opposite side.
4To engage swivel wheel: Slide gray lever,
located above the front wheel, to the right
to engage swivel. Repeat on opposite wheel.
Brake
• To engage parking brake: Gently pull
brake lever into upright position until it
clicks into place.
• To release parking brake: Pinch gray tabs
and pull towards you. Push brake lever
down until it is parallel with the frame.

4
Safety Harness
1Unclip top of shoulder strap
from the seat and re-clip on
the seat loops closest to your
child’s shoulder height.
2To adjust the shoulder and crotch strap length: slide the plastic
guide up or down to lengthen or shorten.
5
3To buckle the harness: Simply
push top right buckle into
center buckle until it clicks into
place. Repeat on other side.
4To unbuckle harness: Push one side of the
center button and pull the corresponding side
buckle away from the center buckle. Repeat
to unbuckle other side.
1To attach canopy to frame: Attach
canopy brackets to sides of seat frame.
NOTE: There are two canopy attachment
locations to be used depending on the
height of your child.
Canopy
WARNING: Always attach mesh to rear of sun canopy and pull down
behind seat when used in conjunction with the seat unit.

6
7
WARNING:
Always remove
child from seat
before removing
seat from frame.
Seat
1To assemble seat: Secure seat fabric to
seat frame by lining up snap placement
on the frame and fabric.
2Secure seat straps around the bottom of the
frame, behind the front wheel. Thread one seat
strap through the D ring of the other strap, and
fasten both Velcro sides firmly together.
To assemble seat:
1Remove mounting
bracket plugs by gently
pulling on them.
To place seat on frame:
2Locate desired seat position
on stroller frame. Align seat
adaptor brackets with mounting
brackets on stroller frame.
3Slide seat into brackets until it clicks
into place. Ensure both sides of seat
are securely fastened into frame
before use.
To remove seat:
1Press gray tabs on
Adaptor Brackets and
pull up.
Adjustable Footwell
1Squeeze lever located under the top of the seat,
behind the canopy.
1To lengthen or shorten footwell: Press
buttons on lower portion of footwell and
slide in or out until it clicks into place.
2Pull down to lower seat and pull
up to raise seat until it clicks into
the desired position.
2To raise or lower footwell: Press buttons on
upper portion of footwell and pull up or push
down until it clicks into the desired positon.
Reclining Seat

9
Basket
1 Fasten top snaps of basket around
middle support bar of stroller frame.
2 Fasten bottom snaps of basket around
side support bars of stroller frame.
3 Hook the top front plastic loop over the
metal knob on the front of the frame.
Repeat on opposite side.
4 Hook lower front loop around hook
behind front wheel mount.
Quick Fold Technology
1To fold stroller: Remove child from seat. Pull up on both fold handles at the same time with a gentle tug.
Simple Lift & Fold (Patented)
2Snap storage lock around frame to prevent
frame from opening when carrying or storing.

10
Steering
• Steering your stroller is simple: It is balanced to turn with just a light touch on the handlebar without
having to lift the front wheel.
In the Dark
• Since we are concerned about the safety of you and your child, we recommend that you not use
your stroller at night. However, if you choose to, please attach reflective strips to the wheels and the
seat. Bicycle lights can also be mounted on the handle crossbar. These accessories can be found at
most bike stores.
Maintenance
• To preserve the longevity of your stroller, it is important to perform simple, regular maintenance.
The tires on your stroller are foam filled. Though the P.S.I is printed on the tire, you will never need
to inflate them. From time to time, make sure that the joints and folding areas are still in good
condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop
for added lubrication. All repairs should only be carried out by an authorized dealer.
In Motion
11
As your family grows, so can your City Select...
NOTE: Bassinet Kit, Car Seat Adaptor Kit and Second Seat Kit Sold Separately.

12
13
Washing
• You can machine wash your stroller’s seat in cold water with a mild detergent.
To minimize shrinkage, simply reattach the seat to the frame to dry.
(Please do not put the seat in the dryer!)
• Be sure to remove the frame and PE board from the back of the seat before washing.
Wheel Care
• The wheels can be cleaned using a damp cloth.
They will need to be dried completely with a soft towel or cloth.
Storing
• Sunshine can fade seat fabric and dry out tires, so storing your stroller indoors will
prolong its good looks. However, if you do store it outside, using a tarp will help
protect against weather wear.
Stroller Care
Baby Jogger's Limited Lifetime Warranty:
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include
but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components
shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a
warranty claim and the warranty is only extended to the original purchaser.
THIS WARRANTY DOES NOT COVER:







fitness for a particular purpose is according to the specific warranty period for this model unit at time of purchase. Some states do not allow the


consult your local or state consumer affairs office or your state’s Attorney General.
E-MAIL: 
CALL: 
 1-804-262-6277
MAIL: BABY JOGGER COMPANY
8575 Magellan Parkway
Suite 1000
 
WARRANTY REGISTRATION ON-LINE AT
www.babyjogger.com/register

We wish you many happy journeys with your new
stroller! Your stroller is a great product, and we
are proud to manufacture it. If you have any
questions or comments, please give us a call at:
1.800.241.1848
Baby Jogger is a Division of Dynamic Brands
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227
T: 800.241.1848 • F: 804.262.6277 • www.babyjogger.com
Thank You!