BaByliss Keratin Shine Volume User manual

Model 2993U

KERATIN SHINE VOLUME AIRSTYLER
A powerful 1000W hot air styler with 3 interchangeable attachments,
perfect for adding volume, shape and smoothness to any style.
Featuring keratin-infused ceramic technology and super ionic
conditioners, to give a smooth, shiny nish for healthy looking hair.
FEATURES
• 1000W
• 2 heats plus a cool setting
• Keratin-infused ceramic coated barrels
• 50mm thermal brush for dramatic volume
• 38mm thermal brush for shorter styles, layers and fringes
• Nozzle for precise styling
• Super ionic frizz-control
• 2m swivel cord
• 3 year guarantee
SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction booklet. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over a product or package
may be dangerous. To avoid danger of suffocation, keep
this wrapper away from babies and children. This bag is
not a toy.

WARNING! THIS APPLIANCE GETS HOT!
• ALWAYS keep out of reach of children (during and after
use and whilst cooling).
• This appliance should not be used, cleaned or
maintained by children.
• Always take extra care if used on children or near
children.
• Do not use on very young children.
IMPORTANT SAFETY
• UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous
even if the appliance is switched off. For additional
protection the installation of a residual current device
(RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.
• Do not use this appliance in the bathroom.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,
discontinue use immediately. Contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’
section for further information).
• Do not use the appliance if the lead is damaged. In the
event of lead damage, discontinue use immediately.
If the lead is damaged it must be replaced by the

manufacturer. Return the appliance to the Customer
Care Centre (refer to ‘UK After Sales Service’ section
for further information). No repair must be attempted
by the consumer.
• Do not leave the appliance unattended when switched
on or plugged in.
• This unit is equipped with a safety thermostat. In the
event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, switch the airstyler to the “0” position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to
overheat discontinue use immediately, switch off and
unplug, and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section for further
information).
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the ears, eyes, face and neck.
• Always ensure that the rear air lter is kept away from
hair during use to prevent it being pulled into the fan
which may cause the appliance to overheat.
• Do not use any other attachments with this appliance
other than those supplied with it.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities,
or whose lack of experience and knowledge, might
cause a hazard, unless they have been correctly

instructed to understand the safe use and hazards
involved and are adequately supervised.
• After use, do not coil the lead around the appliance as
this may cause damage to the lead. Instead, coil the
lead loosely by the side of the appliance.
• This appliance complies with the requirements
of Directives 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Electrical Safety of
Domestic Appliances).
Ionic Technology
Many aspects of modern living, including air conditioning, contact with
man-made bres and air pollution contribute to a build-up of static
electricity in the hair. Even brushing and towel drying the hair can
increase these levels, causing the surface of the cuticle to become
rough. Consequently, hair may have a dull appearance. High levels of
static charge can also cause the hair to become “y-away” and difcult
to style. The super ion generator releases more negative ions than a
regular ionic port which act to neutralise the static charge, smoothing
the hairs cuticle for noticeably smooth, shiny, manageable hair.
Heat Settings
There are 2 heats plus a cool setting. Slide the switch to the rst
position to select the low heat ‘I’, the second position for the high heat
‘II’, and the third position for the cool setting ‘*’.
INSTRUCTIONS FOR USE
• If you have long or thick hair, you may nd it quicker and easier to
use a hairdryer rst to rough dry your hair and remove the excess
moisture. For added volume, turn your head upside down as you dry.
• Once the hair is 80% dry, you should start to create your style using
the styler.
• Secure one of the attachments on to the airstyler.
• Choose the setting that best suits your hair type and the style you
want to achieve.

- Use setting ‘I’ for cooler drying and less heat - ideal for shorter
styles and ner hair.
- Use setting ‘II’ for faster drying and more heat - ideal for long
styles and thicker, more coarse hair.
• Separate your hair into manageable sections and place the brush
head under the section of hair, as close to the roots as possible.
• Use the brush to lift the hair at the roots as you dry.
• Move the styler down through the hair, gently brushing as you dry.
• Finally, select the cool setting ‘ * ’ to set your style.
• Repeat across all sections until hair is dry and the desired style is
achieved.
• After use, switch off the styler and remove plug from socket.
• Allow to cool before storing away.
Maximum Volume and Body
• For added root lift and for creating body and volume attach one of
the thermal brush heads. Place it into the hair close to the roots;
hold the brush in place at the roots for a few seconds before gently
moving the styler slowly down the hair.
• To create shape at the ends of the hair, run the brush head from the
root to the ends. As you reach the end of the section rotate the brush
head turning the ends of your hair inward to achieve a turned in style
or alternatively rotate the brush outwards for a icked out style.
• The cool setting is used at the end of styling to set the style and give
long-lasting effect. Once you have nished styling your hair, move
the slide switch to the cool position ‘*’ and brush through the section
of hair. The cool air helps lock in the style.
Changing the Attachments
• To change the attachment, place over the handle so that the small
cut out area goes behind the buttons, push the attachment on to the
handle until it clicks into place.
• To remove the attachment, press and hold the two buttons and pull
the attachment away from the handle.

CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition follow the
steps below:
General
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side when storing away.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.
Cleaning & Maintenance
• Unplug the appliance and let it cool completely before cleaning it.
• Holding the handle of the appliance rmly pull the top of the rear lter
towards you, this will enable the rear lter to open.
• Using a soft brush, clean any hair and other debris from the lter.
• Replace the rear lter by pushing back into position.
• To clean the outside of the appliance, wipe with a damp cloth. Make
sure no water enters the appliance and it is completely dry before
use.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 3 years.
This guarantee covers defects under normal use from date of
purchase and ceases to be valid in the event of alteration or repairs by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture, it will be repaired or replaced
through Conair UK After Sales Service. The Conair Group Ltd reserves
the right to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance or should you need to return
your product, please contact the Conair Customer Care Line on
0370 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry
to [e-mail].
The return address is:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details,
together with a copy of proof of purchase and details of the fault.
SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.

UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L.
• Neither the BLUE nor BROWN wires should be connected to the
terminal which is marked with the letter E or the symbol.
This appliance is supplied tted with a BS1363 mains plug and a
BS1362 13A fuse. If this plug is removed from the appliance please
ensure it is disposed of safely as a disconnected plug is dangerous if
reconnected to the mains. If any other type of plug is used, a 13A fuse
must be tted.