BaByliss MULTI STYLE 2800DU User manual

Model 2800DU
PRO CERAMIC 12 IN 1 STYLER

PRO CERAMIC 12 IN 1 STYLER
Up to 200°C salon performance ceramic multi-styler, for fastprofessional
results with a unique power handle design that gives total control and
ease of use. Styling versatility with 8 interchangeable attachments to
create straight or crimped styles, tight, medium or loose curls, waves,
spirals and volume.
FEATURES
• Up to 200°C salon temperature performance
• Fast heat up
• Ceramic plates for a smooth nish
• Unique power handle design for total control
• Cool tip
• 8 attachments
- 38mm ceramic straightening plates for a smooth, shiny nish
- 38mm ceramic crimping plates add long-lasting texture to hair
- 13 - 16mm ceramic coated dual barrel for natural looking curls
- 13mm ceramic coated barrel for tight curls
- 16mm ceramic coated barrel for perfectly dened curls
- 19mm ceramic coated barrel for loose curls and waves
- 19mm spiral sleeve for spiral curls
- 19mm brush sleeve for shaping, styling and adding volume
• Integrated heat rest
• 1.8m swivel cord
• 4x sectioning clips
• 3 year guarantee

SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction booklet. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over a product or package
may be dangerous. To avoid danger of suffocation, keep
this wrapper away from babies and children. This bag is
not a toy.
WARNING! THIS APPLIANCE GETS HOT!
• ALWAYS keep out of reach of children (during and after
use and whilst cooling).
• This appliance should not be used, cleaned or
maintained by children.
• Always take extra care if used on children or near
children.
• Do not use on very young children.
IMPORTANT SAFETY
WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.
• Do not use the appliance in the bathroom.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the appliance
has been dropped. In the event of damage, contact the
Conair Customer Care Line (refer to ‘UK After Sales
Service’ section for further information).

• Do not use the appliance if the lead is damaged. Return
the appliance to the Customer Care Centre (refer to ‘UK
After Sales Service’ section for further information). No
repair must be attempted by the consumer.
• Do not leave the appliance unattended when switched
on or plugged in.
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the eyes, ears, face and neck.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Allow appliance to cool before storing away.
• After use, do not coil the lead around the appliance as
this may cause damage. Instead, coil loosely by the
side of the appliance.
• This appliance complies with the requirements of
Directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Electrical Safety of Domestic
Appliances).

INSTRUCTIONS FOR USE
General
• Ensure the hair is dry and combed through.
• Fit the required attachment as described below, ensuring that the
attachment is locked into position.
• To remove the attachments ensure the appliance is cool and
unplugged. On the power handle there are two slide switches on the
top and lower housing. Slide back the switches individually and pull
to release the separate attachments.
• Follow the instructions for each attachment as stated below.
• Plug the appliance into a suitable mains socket and switch on, the
‘on’ indicator light will illuminate.
• Always place on a rm surface using the safety stand on the base of
the appliance.
• Do not place the appliance on any heat sensitive surface.
• Allow the appliance to heat up.
IMPORTANT! The element of the appliance will become very hot when
plugged in and switched on. Before xing or removing any attachments,
ensure the appliance is cool, switched off and is unplugged.
13MM/16MM/19MM TONG ATTACHMENTS
To create, tight or loose curls:
- Use the 13mm tong to create tighter curls
- Use the 16mm tong to create dened curls
- Use the 19mm tong to create loose curls
Fitting The Tong Attachments
• To achieve your desired style, insert the correct size tong in the
bottom slot of the power handle. On the bottom of the attachment
there is a small ridge, ensure this is facing downwards and then push
the attachment into the handle until it clicks into place.
• Hold the handle in the closed position and insert the spring lever in
the top slot of the appliance. On the top of the spring lever attachment
there is a small ridge, ensure this is facing upwards and then begin

to push the attachment into the handle, whilst still holding the handle
in the closed position you will need to line up the grooves on the
attachment so that they connect with the tong attachment and it clicks
into place.
NOTE: When using the 19mm tong you will just need to insert it as one
attachment, as the spring lever is already attached to the tong.
Instructions of use for 13mm and 16mm Tong Attachments
• Section dry hair evenly and comb through before styling. For tighter,
bouncier curls use less hair. For free-owing curls use more hair.
• Pressing the lever, place the ends of the hair underneath the lever.
• Once hair is in place carefully let go of the lever so the hair is held
securely between lever and barrel.
• Wind the hair around the barrel towards the scalp at a slight angle so
the hair wraps around the barrel in a spiral motion.
• As you wind the hair around the barrel, ensure the hair is distributed
evenly so the entire section is touching the barrel. Try not to overlap
the hair as it is wound around the barrel as this means not all of the
hair section will get heated to create an even curl result.
• Hold in place for 5-10 seconds depending on the texture and length
of your hair.
• To remove the tong press the lever and pull tong away. To ‘set’ the
style, do not comb or brush hair until it cools.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
Instructions of use for 19mm Tong Attachment
• Section dry hair evenly and comb through before styling. For tighter,
bouncier curls use less hair. For free-owing curls use more hair.
• Pressing the lever, place the tong midway up the hair section and
spread hair evenly between the lever and barrel.
• Once hair is in place carefully let go of the lever so the hair is held
securely between lever and barrel. Gently slide the tong down to the
hair ends.
• Wind the hair around the barrel at a slight angle, so the hair wraps

around the barrel in a spiral motion. As you wind the hair around the
barrel, ensure the hair is distributed evenly so the entire section is
touching the barrel, try not to overlap the hair.
• Hold in place for 5-10 seconds depending on the texture and length
of your hair.
• To remove the tong press the lever and pull tong away. To ‘set’ the
style, do not comb or brush hair until it cools.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
DUAL BARREL TONG ATTACHMENT
To create waves and styles with movement:
- Use both the 13mm and 16mm tongs
Fitting The Dual Barrel Tong Attachment
• Insert the 13mm size tong in the bottom slot of the appliance. On the
bottom of the attachment there is a small ridge, ensure this is facing
downwards and then push the attachment into the handle until it
clicks into place.
• Then hold the handle in the closed position and insert the 16mm size
tong in the top slot of the appliance. On the top of the16mm size tong
attachment there is a small ridge, ensure this is facing upwards and
then begin to push the attachment into the handle, whilst still holding
the handle in the closed position you will need to line up the grooves
on the attachments so that they connect with each other and click
into place.
Instructions For Use - Dual Barrel Tong
• Take a small section of hair and wind the hair around both barrels.
Take care to avoid the hot surface of the barrels.
• Hold in place for 5-10 seconds, depending on the length and texture
of the hair.
• Release the end of the hair and slowly pull the tong from the hair.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.

SPIRAL SLEEVE ATTACHMENT
To create ringlets and tousled curls:
- Use the 19mm tong with the spiral sleeve
NOTE: The spiral sleeve can only be used with the 19mm tong
attachment.
Fitting The Spiral Sleeve Attachment
• With the 19mm tong already inserted in the appliance, ensure the
barrel is completely cool. Push the spiral sleeve over the tong and
the long lever.
Instructions For Use - Spiral Sleeve
• Section dry hair evenly and comb through before styling.
• Press the spring lever and place the end of the hair section under the
spoon. Release the spring lever to secure the section of hair. To avoid
crimped ends, ensure the ends are securely wound under the spoon
in the direction of the desired curl.
• Place the spring lever on the top of the hair section and twist the
appliance upwards, winding the hair around the tong, keeping the
hair within the spiral guides. Wind the hair upwards, taking care to
avoid the hot surface of the barrel touching the scalp.
• Hold in place for 5-10 seconds, depending on the length and texture
of the hair.
• To remove the tong, twist the appliance downwards, unwinding the
hair from around the barrel and press the spring lever to release the
hair section.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
BRUSH SLEEVE ATTACHMENT
To create shape, texture and volume:
- Use the 19mm tong with brush sleeve.
NOTE: The brush sleeve can only be used with the 19mm tong
attachment.

Fitting The Brush Sleeve Attachment
• With the 19mm tong already inserted in the appliance, ensure the
barrel is completely cool. Push the brush sleeve over the tong and
the long lever.
Instructions For Use - Brush Sleeve
• The 19mm round brush attachments is ideal for creating shape and
adding root volume to styles.
• Separate the hair into sections and detangle hair before styling.
• Place the brush at the roots and slide downwards towards the ends
of the hair.
• To add shape, roll a section of hair around the brush and hold for
5-10 seconds.
• On longer styles, be careful not to overlay the hair around the barrel
as this may cause tangling.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
STRAIGHTENER/CRIMPER ATTACHMENT
To create sleek styles or crimped styles:
- Use the straightener/crimped plates
This appliance has one set of heated styling plates, which are reversible
for crimping or straightening. Once the plate attachments are tted it is
simple and easy to change between using the straightening plates and
crimping plates without having to remove the attachments themselves.
Fitting The Straightener/Crimper Attachment
Insert both styling plate attachments into the two slots in the power
handle, to do this make sure the ridge is lined up so the attachments
can be clicked into place.
Changing The Plates
This appliance has one set of heated styling plates, which are reversible
for crimping or straightening. To change between the plates, close the
power handle together and simply push the convertible button that is
on the side of the styling plate attachment.

Instructions For Use - Straightening/Crimping Plates
Straight looks
• Separate a section of hair and place the section of hair between the
plates, close to the roots.
• Hold the hair rmly between the plates and slide slowly down the
length of the hair, from root to tip.
• Allow the hair to cool before combing through.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
Crimped or textured looks
• When using the crimping plates, clamp the hair between the top and
bottom plates by pressing the styler together. Hold in place for 5-10
seconds.
• Release the styler from the hair and re-position the plates so that the
next crimp falls in line with the rst or do random sections depending
on your own style.
• Always work from the roots towards the end of the hair.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
CLEANING & MAINTENANCE
To keep your appliance in the best possible condition, please follow
the steps below:
General
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

To clean
• Ensure the appliance is cool, switched off and unplugged.
• Using a damp cloth and mild detergent or soap, wipe the appliance
clean.
• Ensure the appliance has dried thoroughly before using again.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 3 years. This
guarantee covers defects under normal use from date of purchase and
ceases to be valid in the event of alteration or repairs by unauthorised
persons. If the appliance does not perform satisfactorily due to defects
in materials or manufacture, it will be repaired or replaced through the
Conair UK After Sales Service. The Conair Group Ltd reserves the right
to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.
UK AFTER SALES SERVICE
For further advice on using the appliance or should you need to return
your product, please contact the Conair Customer Care Line on
0370 5 133191 (09:00 to 17:00 Monday to Friday) or email your enquiry
to [e-mail].
The return address is:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details,
together with a copy of proof of purchase and details of the fault.

SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L.
• Neither the BLUE nor BROWN wires should be connected to the
terminal which is marked with the letter E or the symbol.
This appliance is supplied tted with a BS1363 mains plug and a
BS1362 5A fuse. If this plug is removed from the appliance please
ensure it is disposed of safely as a disconnected plug is dangerous if
reconnected to the mains. If any other type of plug is used, a 5A fuse
must be tted.