BaByliss Digital Sensor Curl Secret User manual

made in China
C1000E IB-leaflet.indd 1 6/27/13 2:18 PM

3
1.
3.
5.
7.
2.
4.
6.
8.
1
4 3 5
7
8
BaByliss S.A.R.L. - 99, Avenue Aristide Briand - 92120 Montrouge - FRANCE
www.babyliss.com
C1000E IB-leaflet.indd 2 6/27/13 2:18 PM

6
7
ENGLISH
With the BaByliss Curl Secret styler, easily create beautiful curls with
long-lasting eect. No tedious handling, no complicated move,
the Curl Secret makes gorgeous curls thanks to its clever automatic
system.
Read the safety instructions rst.
PRODUCT FEATURES
1. Ceramic coating
2. Fast heat up (max. 230 °C)
3. 0-I-II switch : 2 heat settings - 210 °C (I) - 230 °C (II)
4. 3 timer settings (8, 10 and 12 seconds) with audio beep indicator
for various curl eects
5. Operated indication light (LED)
6. Automatic shut o
7. Swivel cord
8. Cleaning tool
USE
• Plug in the appliance, switch on and select the desired temperature
using the 0-I-II switch. See table below :
Temperature Hair type
(I) : 210°C Fine, lightened and/
or damaged hair
(II) : 230°C Normal, thick, wavy, curly
and/or coloured hair
• The indicator light comes on and will start to ash.
• The indicator light will stop ashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use;
the indicator light will stay on.
• Select the time setting depending on the desired curl eect. For
loose curls, select the minimal time setting. For more dened curls,
select the maximal time setting.
C1000E IB-leaflet.indd 6 6/27/13 2:18 PM

7
Please refer to the table below :
Time Audio beep indicator Curl eect
8 8 seconds 3 beeps Loose waves
10 10 seconds 4 beeps Soft curls
12 12 seconds 5 beeps Dened curls
• Ensure the section of hair is clean, dry and perfectly combed
through.
• Clip the upper layers to the top of your head to work rst with the
layers underneath.
• Separate a section of hair no bigger than 3 cm. Ensure the section
is combed through.
• The appliance must be positioned into the hair with the cylinder
facing towards the head. (FIG 1, 2).
• The hair section must be straight and placed neatly through the
centre of the appliance, between the handles.
• Once the hair is in place, close the handles to allow the hair to be
automatically taken into the appliance.
Note : If you continue to hold the hair section after closing the
handles then the styler will stop and beep to indicate that you
must release the tension on the hair. (FIG 3, 4). If you have
taken too much hair (a section of hair bigger than 3 cm) or the
hair is not neatly going through the centre of the appliance, the
styler will again stop and beep to indicate a problem.This safety
feature ensures that there will be no tangles.
• Continue to hold the handles closed until the end of the individual
beeps (after 3, 4 or 5 beeps depending on the selected time setting,
see the table hereabove).
• Release the appliance from the hair by opening the handles fully.
Do not pull away the appliance from the hair, it will straighten the
curl out (FIG 5).
• Allow your hair to cool before handling or combing.
• Repeat around the head until you have the amount of curls desired.
Note : The styler is equipped with an alternating curl direction
automatic system for a natural nish (FIG 6).
• After use, switch o and unplug the appliance. Allow to cool before
storing away.
C1000E IB-leaflet.indd 7 6/27/13 2:18 PM

8
9
Sleep mode
If the appliance is not used for more than 20 minutes the temperature
will automatically drop down by 50°C. If you wish to continue using
the appliance after this time, simply close then release the handles
and it will return to the temperature setting you were using it on.
Auto shut o
If the appliance is switched on for more than 60 minutes
continuously, it will automatically switch o. If you wish to
continue using the appliance after this time, simply slide
the 0-I-II switch to the relevant setting to turn the power on.
CLEANING AND MAINTENANCE
In order to prevent a build-up of residue from hair products that
would not allow the appliance to work properly, it is very important
to use the cleaning tool included to regularly clean the appliance.
• Ensure the appliance is switched o, unplugged and cool.
• Lightly dampen the cleaning tool with warm water and mild soap.
• Insert the tool fully into the cavity formed by the appliance and the
cylinder (FIG 7).
• Rotate the tool around the cylinder to remove any build-up of hair
products. (FIG 8).
• Remove the cleaning tool from the cavity.
• Ensure the appliance has dried thoroughly before re-using.
• The cleaning tool can be used numerous times; just remove the
felt pad, rinse it in warm soapy water and leave to dry before using
again.
Once unplugged and cooled, the appliance housing may be wiped
with a damp cloth. Ensure the appliance is completely dry before
plugging it in again.
C1000E IB-leaflet.indd 8 6/27/13 2:18 PM

C1000E IB-leaflet.indd 54 6/27/13 2:18 PM

C1000E IB-leaflet.indd 55 6/27/13 2:18 PM

C1000E IB-leaflet.indd 56 6/27/13 2:18 PM