BaByliss Curl Secret C905P User manual

6
7
ENGLISH
With the BaByliss Curl Secret® styler, you can easily create long-lasting,
beautiful curls. Thanks to its clever automatic system, the Curl Secret®
makes gorgeous curls without requiring tedious hand movements.
Read the safety instructions rst.
PRODUCT FEATURES
- Ceramic-coated cylinder (1)
- Fast heat up (max. 205 °C)
- 0-I-II switch: 2 heat settings - 185°C (I) - 205°C (II) (2)
- Indicator light (LED) (3)
- Automatic shut o
- Swivel cord (4)
- Cleaning tool (5)
USE
Notes
• When using the unit for the rst time, you might notice a distinct odour: this
is common and will disappear by the next use.
• Each time you use the appliance, you may see some steam. Do not be
concerned, this could be because of evaporation of the natural oils of
the hair, residual hair products (leave-in hair products, hairspray, etc.) or
excess moisture evaporating from your hair.
• A heat-protection spray can be used to provide optimal protection of the
hair.
• Plug in the appliance, switch on and select the desired temperature
using the 0-I-II switch. See table below:
Temperature Hair type
(I): 185°C Fine, bleached and/or damaged hair
(II): 205°C Normal, thick hair
wavy or dyed
• The indicator light comes on and will start to ash.
• The indicator light will stop ashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use; the
indicator light will stay on.
16_C903PE-C904PE-C905PE_IB.indd 6 06/06/2016 9:54 AM

7
Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair no wider than 3 cm. Ensure the section is
thoroughly combed through.
• Bring the appliance close to the hair and position it in the right
direction: the cavity formed by the cylinder downwards (FIG.1 and 2)
and facing the head. (FIG. 3 and 4).
• With your free hand, take hold of the tip of the section of hair and place
it on the opening, in the funnel situated between the two handles
(FIG.5).
Note: To prevent the appliance from blocking, ensure that you have no
hair lying across the edges.
Also ensure that you are not pulling your hair before activating the
handles (FIG. 6 and 7).
If these precautions are not respected, you risk catching your hair
in the appliance.
• Once the section of hair is in place, close the handles to allow the hair to
automatically enter into the appliance.
• Keep the handles closed until the beeping stops (FIG.8).
• Gently release the hair from the appliance by opening the handles
(FIG.9). Don’t pull on the appliance to free the hair. If you do this you
will ruin the curl eect.
• Allow your hair to cool before handling or combing it.
• Repeat all over the head until you have the number of curls you would
like.
• After use, switch o and unplug the appliance. Allow to cool before
storing away.
Protection system
The appliance is tted with a protection system. If hair becomes tangled,
the appliance emits an audible signal, it blocks and stops heating.
If this occurs, release the handles, ensuring that the appliance and
section of hair are correctly positioned, then simply re-close the handles
to deactivate the security system and re-start the appliance.
Sleep mode
If the appliance is not in use for more than 20 minutes, the temperature
will automatically reduce to 170°C. If you wish to continue using the
appliance after this time, simply close then release the handles and the
appliance will return to the temperature setting previously selected.
16_C903PE-C904PE-C905PE_IB.indd 7 06/06/2016 9:54 AM

8
9
Automatic shut o
If the appliance is left switched on for more than 60 minutes at a time, it
will automatically shut o.
CLEANING AND MAINTENANCE
In order to prevent build-up of residue from hair products which would
prevent the appliance from working properly, it is important to use the
cleaning tool provided to regularly clean the appliance.
• Ensure the appliance is switched o, unplugged and cool.
• Lightly dampen the cleaning tool with warm water and mild soap.
• Insert the tool fully into the cavity formed by the appliance and the
cylinder (FIG. 10).
• Rotate the tool several times around the cylinder to remove any build-
up of hair products (FIG. 11).
• Remove the cleaning tool from the cavity.
• Ensure the appliance is completely dry before reusing.
• The cleaning tool can be reused many times. Simply remove the felt
pad, rinse it in warm soapy water and leave to dry before reusing.
Once unplugged and cooled, the appliance housing may be wiped with
a damp cloth. Ensure the appliance is completely dry before plugging
it in again.
16_C903PE-C904PE-C905PE_IB.indd 8 06/06/2016 9:54 AM