BaByliss PRO BAB2668U User manual

CONICAL
WAND
TITANIUM EXPRESSION

BAB2668U

CONGRATULATIONS ON YOUR ELITE TITANIUM PURCHASE
With over 50 year’s heritage, BaByliss PRO remains the choice of the world’s best
professional stylists. When it comes to perfectly styled hair our mission is to create
styling tools that delivery the very highest results.
We hope you enjoy using your new product from our Titanium Expression range; a
luxurious collection of professional hair tools that combine high-fashion styling with
innovative technology to help you achieve faster, longer-lasting results with a flawless
finish for total salon performance every time.
Premium titanium with ultra-advanced
ceramic heaters delivering constant, regulated
temperature control. Heat is instantly
transferred into the hair for faster, longer-
lasting results with a flawless finish.

IMPORTANT SAFETY CAUTIONS
•Please retain these instructions for
future reference.
•This appliance should only be
used as described within this
instruction booklet.
•WARNING! Polythene bags over
product or packaging may be
dangerous. To avoid danger of
suffocation, keep wrapper away
from babies and children. These
bags are not toys.
•WARNING! Do not use this
appliance near water contained in
basins, bathtubs or other vessels.
•Do not use the appliance in
the bathroom.
•Do not immerse the
appliance in water or other liquids.
•This appliance should only be
used as described within this
instruction booklet.
•Always inspect the appliance
before use for noticeable signs of
damage. Do not use if damaged, or
if the appliance has been dropped.
In the event of damage, contact
the Conair Customer Care Line
(refer to ‘UK After Sales Service’
section for further information).
•Do not use the appliance if
the cord is damaged. In the
event of damage, discontinue
use immediately. If the cord is
damaged it must be replaced by

the manufacturer. Return the
appliance to the Conair Service
Centre (refer to ‘UK After Sales
Service’ section for further
information).
•Do not leave the appliance
unattended when switched on or
plugged in.
•Do not place the appliance on
any heat sensitive surface whilst
in operation.
•Take care to avoid the hot
surfaces of the appliance coming
into direct contact with the skin,
in particular the ears, eyes, face
and neck.
•This appliance should not be
used by adults or children whose
lack of experience, product
knowledge or disability might
cause a hazard, unless they have
been correctly instructed and are
adequately supervised.
•Children should always be
supervised to ensure that they do
not play with this product.
•Allow appliance to cool before
storing away.
•After use, do not coil the cord
around the appliance as this
may cause damage. Instead,
coil loosely by the side of the
appliance.
•This appliance complies with
the requirements of Directives
04/108/EEC (Electromagnetic
Compatibility) and 06/95/EEC
(Electrical Safety of Domestic
Appliances).

GETTING TO KNOW YOUR CONICAL WAND
Create perfectly defined, classic curls with this Conical Wand featuring up to 210°C high
heat and digital heat control. The glossy titanium barrel with a super-smooth finish has a
gentle hold to make styling easier while leaving hair looking extra shiny and the extended
barrel length is ideal for even longer hair.
FEATURES
•25-13mm tapered barrel with extended
length for easy styling even on longer
hair
•Premium titanium barrel for faster styling
and a flawless finish
•Ultra-advanced ceramic heaters for
constant, regulated temperature control
•High heat performance up to 210˚C for
long-lasting results
•15 second heat up and instant heat
recovery
•11 digital temperature settings for
enhanced hair protection on all hair
types
•Stay cool safety tip
•Auto shut-off for added safety
•Salon length 2.7m swivel cord for ease
of use
•Heat protection glove
•Heat mat with storage compartment for
convenience and safety

OPERATING FEATURES
Cool tip
25mm-13mm
titanium conical
barrel
On/off switch
Temperature control
switches (+/-)
Integrated heat
rest
Digital temperature
display panel 2.7m swivel
power cord

FINDING THE CORRECT HEAT SETTING FOR YOUR HAIR TYPE
There are 11 temperature settings to select from (160°C-210°C) for enhanced hair
protection on all hair types. Use the guide below to find the correct temperature for your
hair category. We recommend you always start with a lower temperature and increased
gradually if required.
IMPORTANT! This appliance is designed to reach very high temperatures. If the maximum
setting is too hot for the hair type then select a lower temperature setting.
Hair Type
Description
Very Fine,
Fragile Hair
Reglarly
Coloured or
Highlighted
Hair
Fine, Easy to
Curl Hair
Normal
Textured
Hair
Naturally
Curly or
Wavy Hair
Thick or
Coarse Hair
Recommended
Temperature
Setting
160°C 165°C 170°C 185°C 190°C 200-210°C

HOW TO USE YOUR CONICAL WAND
WARNING! This appliance reaches up to 210°C, please take care to avoid the hot surface of
the barrel coming in to direct contact with the skin, in particular the ears, eyes, face and neck.
CAUTION! Do not place the appliance on any heat sensitive surface whilst in operation.
Use the heat mat provided to protect the work surface whilst styling your hair.
•Ensure your hair is completely dry and combed through before use.
•Press and hold the button marked ‘I/0’ to switch the styler on. The temperature display
panel will begin to flash 160°C.
•The styler will automatically adjust to the 160°C temperature setting
each time it is switched on and this will be displayed on the LCD screen.
IMPORTANT! Within 4 seconds of turning the styler on, the temperature setting will
automatically lock. You are able to adjust the temperature setting immediately after
switching on the styler, however if the temperature locks, hold down either the ‘+/-’
buttons for 1-2 seconds to change the temperature.
•The temperature on the display will flash while the styler is heating up to the selected
temperature. You may still change the temperature setting at this time.
•When the selected temperature has been reached, the temperature display will stop
flashing.

•Ensure hair is dry and combed through. Before styling make sure the universal heat
glove is worn on the hand which is wrapping the hair around the barrel.
•Take a section of hair starting around 2 inches from the scalp.
•Hold the styler at a slight angle pointing the cool tip downwards
•Wrap the hair around and down the barrel until you reach the ends of the section. As
you wrap the hair, ensure it is distributed evenly so the entire section is touching the
barrel. Try not to overlap the hair as you wrap.
•Hold the end of the hair in place for 3-5 seconds depending on the hair type. Where
possible and if hair is long enough, hold the ends of the hair on the cool tip.
•Unwind the hair from around the barrel or simply release the section and pull wand
away.
•Repeat as necessary through the remaining sections. Use the heat protection mat to
place your styler on between each section to protect surfaces.
•Only once hair is cool, run your fingers through the hair to break up the curls/waves.
•After use, press and hold the ‘I/0’ button for 1-2 seconds to switch your styler off and
unplug.
•Allow to cool completely before storing away. For extra protection, wrap the styler in
the heat protection mat.
IMPORTANT! A universal heat protective glove has been supplied to help protect
the hand from temporary contact with the barrel when wrapping the hair around the
appliance. Please note the heat protective glove is only designed to give initial contact
protection. Discomfort will be caused with prolonged contact with the hot surface.
STYLING ADVICE

AUTO SHUT-OFF
This appliance has an automatic shut off feature for added safety. If the appliance is
switched on for more than 60 minutes continuously, then it will automatically switch off.
If you wish to continue using the appliance after this time, simply press the on/off button
to turn the power on.
LOOKING AFTER YOUR CONICAL WAND
•In order for your styler to retain its top performance it is important to make sure there
is no product build up on the barrel. When the styler is completely cool and unplugged,
use a damp cloth over the surface of the barrel to wipe away any styling product.
•Keep the power cord away from the hot barrel at all times.
•Before storing away, always allow the barrel to cool down and place in the heat mat
provided for extra protection.
•To prevent cord damage, do not wrap the cord around the styler – always store the
cord next to it.

UK GUARANTEE
This BaByliss PRO appliance is guaranteed for salon use for 6 months.
This guarantee covers defects under normal use from date of purchase and ceases to be
valid in the event of alteration or repair by unauthorised persons. If the appliance does
not perform satisfactorily due to defects in materials or manufacture, it will be repaired
or replaced through Conair UK After Sales Service. The Conair Group Ltd reserves the
right to amend terms and specifications without prior notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or email your enquiry to
[e-mail].
If you should need to return your appliance to us please send it to the following address:
Customer Care Centre,
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof of purchase and
details of the fault.

SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be handed to an appropriate collection
point for the recycling of Electrical and Electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about the recycling of
this product, please contact your local council office or your household waste disposal
service.

UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
•The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N.
•The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L.
•Neither core should be connected to the earth terminal of a three pin plug marked with
the letter E or .
This appliance comes fitted with a British Standard 13 amp type plug and a 3 amp fuse. It
is important to always use a 3 amp fuse, should its replacement be required. If any other
type of plug is used, a 5 amp fuse must be fitted at the distribution board.