BaByliss PRO CRIMPER 210 User manual

Model 2165BU
PRO CRIMPER 210

Pro Crimper 210
With its 210°C salon high temperature, ultra fast heat up and
tourmaline-ceramic plates, this salon class crimper instantly creates
shiny, perfectly dened, long-lasting texture in the hair.
FEATURES:
• Up to 210°C salon temperature performance
• 1 ½’’ Tourmaline-ceramic coated plates
• 10 temperature settings
• Cool tips
• On/off button
• On/off indicator light
• Heat-up indicator light
• Professional rubber cord
• 3 year guarantee
INSTRUCTIONS FOR USE
WARNING! This appliance gets very hot. Take care to avoid the hot
surfaces of the appliance coming into direct contact with the skin, in
particular the eyes, ears, face and neck.
You can experiment with different styles - crimping all the hair or playing
with a contrast of at and crimped hair. It is worth being adventurous by
trying a variety of different styles. To add body and fullness, separate
the top layer of the hair and crimp the underneath sections. Or you
can put your hair up in a pony tail and crimp the ends only. The list is
endless. For extra effect, use gel or mousse on the hair before styling.

• Ensure hair is dry and combed through.
• Plug the appliance into a suitable mains socket, the ‘on’ indicator
light will illuminate red.
• Press the “I” button and both the red and green lights will ash, when
the appliance has reached optimum temperature the indicator lights
will stop ashing and will remain green.
• Select the required heat setting using the temperature dial. If you
have delicate, ne or coloured hair, use the lower heat settings. For
thicker hair, use the higher heat settings.
• Separate a 5cm (maximum) section of hair.
• Place the section of hair between the crimping plates
• Hold the hair rmly between the plates for about 5 seconds.
• Release that section of hair and re-position the crimper so that the
next crimp falls in line with the rst.
• Always work from the root towards the end of the hair.
• Repeat as necessary.
• After use switch off and unplug the appliance. Allow to cool before
storing away.
CLEANING AND MAINTENANCE
To help keep your crimper in the best possible condition, clean the
plates on a regular basis.
Please follow the steps below:
• Make sure the appliance has been unplugged and is cool.
• Clean the ceramic plates by wiping with a damp cloth. Make sure
that no water enters the crimper and the crimper is completely dry
before re-use.
SAFETY CAUTIONS
This appliance should only be used as described within these
instructions.
Read carefully before use. Please retain for reference.
WARNING! Polythene bags over product or packaging may be

dangerous. To avoid danger of suffocation, keep wrapper away from
babies and children. These bags are not toys.
• Do not use the appliance in the bathroom.
• Do not use the appliance near basins or other vessels containing
liquids.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable signs
of damage, or if the appliance has been dropped. In the event of
damage, contact the Conair Customer Care Line (refer to UK After
Sales Service section for further information).
• Do not use the appliance if the lead is damaged. In the event of
damage, discontinue use immediately. If the lead is damaged it must
be replaced by the manufacturer. Return the appliance to the Conair
Service Centre (refer to UK After Sales Service section for further
information). No repair must be attempted by the consumer.
• Do not leave the appliance unattended when switched on or plugged
in.
• Do not place the appliance on any heat sensitive surface whilst in
operation.
• Take care to avoid the hot surfaces of the appliance coming into
direct with the skin, in particular the eyes, ears, face and neck.
• This appliance should not be used by adults or children whose lack
of experience, product knowledge or disability might cause a hazard,
unless they have been correctly instructed and are adequately
supervised.
• Children should always be supervised to ensure that they do not play
with this product.
• Allow the appliance to cool before storing.
• After use, do not coil the lead around the appliance as this may cause
damage. Instead coil loosely by the side of the appliance.
• This appliance complies with the requirements of Directives 04/108/
EEC (Electromagnetic Compatibility) and 2006/95/EEC (Electrical
Safety of Domestic Appliances).

UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 3 years.
This guarantee covers defects under normal use from date of purchase
and ceases to be valid in the event of alteration or repair by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture it will be repaired or
replaced through Conair UK After Sales Service. Conair reserve the
right to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.
UK AFTER SALES SERVICE
For further advice on using the appliance contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or
alternatively email your enquiry to [e-mail].
In Guarantee
Return the product to the Conair Service Centre at the following
address:
Conair Service Centre
PO Box 506
Wigan
WN1 9AA
Enclose your name and address, together with proof of purchase and
details of the fault. Conair will either repair or replace the product as
appropriate.

Out of Guarantee
Contact the Conair Customer Care Line on 0870 5 133191 (09:00
to 17:00 Monday to Friday) or alternatively email your enquiry to
[e-mail] for details of the standard repair or replacement
charge. If you wish to proceed with the repair or replacement, return
the product to the Conair Service Centre at the following address:
Conair Service Centre
PO Box 506
Wigan
WN1 9AA
Enclose your name and address together with details of the fault and
cheque made payable to The Conair Group Ltd.
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour markings identifying the terminals on your
plug proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured black.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured red.
• Neither core should be connected to the earth terminal of a three pin
plug marked with the letter E or or is coloured green or green and
yellow.
With this appliance, if a 13 amp plug is used a 3 amp fuse should be
tted. If any other type of plug is used a 5 amp fuse must be tted
either in the plug or at the distribution board.