Bacharach PCA 400 User manual

®
Front Side
Bottom
6
8
7
9
10
12
11
Warm Up: 60 seconds
1
2
3
4
60-SECOND
WARM-UP
IMPORTANT: Ensure that the water trap assembly is
clean, dry, and properly assembled.
WARNING:This analyzer is not intended to be used as a
safety device.
WARNING:This analyzer has not been designed to be
intrinsically safe for use in areas classied as hazardous
locations.
IMPORTANT: Check for obvious signs of splits and / or
cracks in the tubing.
IMPORTANT: Perform power up and initialization in
fresh air to ensure proper calibration.
IMPORTANT: Address / acknowledge any faults or errors
discovered during initialization.
IMPORTANT: Perform routine maintenance (replacing
sensors, calibrating, etc.) as outlined in the PCA®400 User
Manual (P/N 0024-9551).
IMPORTANT: Ensure that the analyzer has sucient
charge before operation. If in doubt, recharge lithium-ion
battery, replace disposable batteries, or provide power
via the AC adapter and USB cable.
1Pistol-Grip Probe
2PCA®400 Combustion Analyzer
3Sample Line with Quick Connectors
4Water Trap & Filter Assembly
5IrDA Communications Port (Not Shown)
6Full Color LCD Touch Screen
7Back, Home & Power Keys (Left to Right)
8Navigation & Enter Keys
9Micro-B USB Connector
10 T-Air Connector
11 T-Stack Connector & Sample Ports
12 Pressure Low Side (-∆P)

Sample Conditioner
Description:
P/N:
The Sample Conditioner extracts
water vapor from samples, allowing
the PCA®400 to accurately read
levels of NO2and or SO2.
0024-7400
Viton®Sample Line
Description:
P/N:
7.5' Viton®Sample Line with quick
connectors allows the PCA®400 to
accurately read levels of NO2and
or SO2.
0024-3236
IrDA + Bluetooth®
Printer
Description:
P/N:
The IrDA + Bluetooth®Printer allows
technicians to print reports directly
from the PCA®400 without a wired
connection.
0024-1680
Printer Paper P/N 0024-1310 (contains 5 rolls of paper)
Water Trap Filters P/N 0007-1644 (contains 3 lters)
O2Sensor P/N 0024-1652
COLOW Sensor P/N 0024-1687
COHIGH Sensor P/N 0024-1542
SO2Sensor P/N 0024-1543
NO2Sensor P/N 0024-1544
NO Sensor P/N 0024-1691
A B
A B
WAIT FOR
RESULTS TO
STABILIZE
A B
IMPORTANT: Use only original equipment components
with this device.
ON
ERROR
BACHARACH,INC.
NEWKENSINGTON,PA15068 USA
TELEPHONE:[phone]
www.MyBacharach.com
MADEINTHEUSA
PCA®400Active
SampleConditioner
POWER:12-15VDC,3A
P/N:0024-XXXX
S/N:
CAUTION: The probe may be hot after analysis and can
cause bodily harm and or damage the analyzer. Allow the
probe sucient time to cool before handling or storing in
the supplied instrument case.
Warning: When testing an appliance, a full visual inspection should be performed to ensure
its safe operation.
CAUTION:Except for sensor and battery replacement,
this analyzer should only be opened and / or serviced by
authorized Bacharach personnel. Failure to comply may
void the warranty.
x