BACtrack View User manual

BACtrack View Quick Start Guide | Self-Tester
1. LOGIN - After downloading the BACtrack View 2 App from the Apple
iTunes App store, open the App and login, using the same email
address and password you created when signing up for the service.
The first time you open the App, you will be prompted to give access
to your Camera and Location. This is required to use the App.
If you’ve forgotten your password, click the “Forgot Your Password?” link, and a password
reset email will be sent to you.
2. SET TESTING SCHEDULE - To setup a new testing schedule, tap the “+” icon on the right side
of the screen. From here, you will be able to:
•Set schedule start day & time frame
•Set if and how often the schedule should repeat
•Set if test times should be randomized or not
•Set how many random tests should be scheduled during the testing time frame

Once you’ve selected your testing schedule, tap the “Schedule Test” button to return to the
home screen. From here, you can see all future test days, indicated by a gray dot under the
date.
3. TAKE TEST –When it’s time to take a BAC test, you will receive a text message from BACtrack
View on your iOS device. Click the link in the message to open the BACtrack View app and
begin your test:
1. Make sure Bluetooth is enabled on your iOS device and then
turn on your BACtrack by pressing the silver button for a 1-2
seconds until the blue lights come on.
2. The app will then automatically connect with your BACtrack.
Once connected, you will see a “preparing the device” screen,
followed by “take a deep breath.”
3. Once you are prompted, blow into your BACtrack for 5 seconds
while holding your iOS device at eye level. You do not need to
blow as hard as you can, but you do need to exhale firmly and
consistently for 5 seconds straight, until you hear a click in the
device.
4. Your test result, date, time, location and image will be shown to
in the Test Results section of the Calendar.
NOTE: If you receive an error, please turn the BACtrack off and on again before
restarting the testing process.

4. (OPTIONAL) TAKE ON DEMAND TEST –Should you ever want to take an
on-demand test that is outside of your testing schedule, simply tap the
“Test” icon on the bottom middle of the screen to initiate a one-time
test. Follow the same instructions as above to test.

5. (OPTIONAL) ADD A MONITOR OR ACCOUNTABILITY PARTNER –If at some point, you’d like to
add a Monitor or Accountability Partner to your account, you can do so by tapping the
“Contacts” icon in the bottom left corner of the App.
NOTE: If you add a Monitor to you account, that person takes over control of the testing
schedule, and you will no longer be able to set your own schedule. Adding an Accountability
Partner has no effect on your account role.