Badger Basket 90941 User manual

KID’S STORAGE BENCH WITH
WOVEN TOP AND THREE BASKETS
MODEL NUMBERS*:
90941 - White
90942 - Brown
VERSION CODE*:
1.0/0321/TG
* Model and Version numbers are needed if
replacement parts are requested
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
Assembly Instructions. Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.
•Assembly Videos available on YouTube
•

CARE INSTRUCTIONS:
Wipe the bench clean with a damp cloth and mild soap as needed. Dry thoroughly.
Spot clean the woven top and the bins as needed. Never immerse them in water.
Do not use the product if it is damaged, broken, or missing parts.
DO NOT allow anyone to stand on this product. It is not a step stool or
ladder. Periodically check to make sure all the hardware remains tight.
No product is a replacement for adult supervision.
Bench supports up to 150 pounds (91 kg).
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing
or not satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: SEE COVER PAGE
Your Version Code is: 1.0/0321/TG
WARNING
ADULT ASSEMBLY REQUIRED. DUE TO THE PRESENCE
OF SMALL PARTS AND SHARP POINTS DURING
ASSEMBLY, KEEP OUT OF REACH OF CHILDREN UNTIL
ASSEMBLY IS COMPLETE.
WARNING - CAUTION
READ ALL INSTRUCTIONS before use of this
product. Use only the parts provided by Badger
Basket®. Keep instructions for future use.
ASSEMBLY TIPS! Review the entire manual before beginning. Leave hardware slightly loose
during assembly and then go back and tighten fully at the end. If using a power screwdriver,
keep torque setting low and go slow to prevent damage to the product.

I×2
A
H
H
I
I
B
H×2
1
A
D
G
E×2
H×12 I×12
J×6 K×4
L
F×3
B×2 C×2
TOOL
（NOT INCLUDED ）
PHILLIPS SCREWDRIVER
60×5mm
50×4mm 30×4mm
TOP SUPPORT SIDE VERTICAL FRAME
BOTTOM SUPPORT BOTTOM BRACE WOVEN BASKET
WOVEN TOP
BOLT BARREL NUT
SCREW SCREW
ALLEN WRENCH

2
3
4
K×4
B
C
I
I
I
I
H
HHH
C
D
E
E
I×4H×4
I×2H×2
I×4H×4
K
K
K
K
I
I
I
I
I
H
H
H
H
H
H
I

G
J
FF
J
J
JJ
J
5
6
7
J×6
×3